9
DESCRIPTION OF THE CONSOLE
Refer to the drawing on page 8 to identify the features
described below.
A. Water bottle holder—This convenient holder keeps
your water bottle handy during your workouts.
B. Hand weight holder—These compartments hold the
optional hand weights.
C. Book holder—This area is designed to hold a book
or magazine.
D. Incline buttons—These buttons control the incline of
the treadmill. Each time a button is pressed, the
incline will change by 0.5%.
E. Speed buttons—These buttons control the speed of
the walking belt. Each time a button is pressed, the
speed will change by 0.1 mph; if a button is held
down, the speed will change in increments of 0.5
mph. The speed range is 0.5 mph to 10 mph.
F. Start button—This button is used to start the walking
belt.
G. OneTouch Speed buttons—These buttons allow
you to quickly select speed settings.
H. Stop button—This button is used to stop the walking
belt.
I. Waistband clip—This clip is designed to be worn on
the waistband of your clothes. If the key is pulled
from the console, the walking belt will automatically
stop.
J. Key—This key turns the console on and off.
K. Time/Segment Time display—When the manual
mode or the iFIT.com mode is selected, this display
will show the elapsed time. When a preset program
or a pulse program is selected, the display will show
both the time remaining in the program and the time
remaining in the current segment of the program.
The display will alternate between one number and
the other every seven seconds.
L. Cross Training indicator—During the two cross
training programs, this indicator will periodically
flash. The optional hand weights can be used while
the indicator is flashing to add upper body exercise
to your workouts.
M. Pulse/Calories display—This display shows the
approximate number of calories you have burned.
When the handgrip pulse sensor is used, the display
will show your heart rate. If the optional chest pulse
sensor is worn, the display will show your heart rate
and the number of calories you have burned, alternating between one number and the other every
seven seconds.
N. Distance/Incline display—This display shows the
distance you have walked and the incline level of
the treadmill. The display will alternate between one
number and the other every seven seconds. Note:
Each time the Incline buttons are pressed, the display will change to show the incline setting.
O. Speed display—This display shows the speed of
the walking belt.
P. Enter button and + and – buttons—These buttons
are used to enter your age when pulse programs
are used.
Q. Program display—When the manual mode or the
iFIT.com mode is selected, this display will show
your progress on an LED track. When a preset
program or a pulse program is selected, the display
will show the settings for the program.
R. Select Workout button—This button is used to select
the manual mode, the preset programs, and the
pulse programs. Note: If the walking belt is moving
when the Select Workout button is pressed, the
walking belt will slow to a stop, the displays will be
reset, and a new program or the manual mode will
be selected.
S. IFIT.com button—This button is used to select the
iFIT.com mode.
T. Mode indicators—These indicators show whether
the manual mode, a preset program, a pulse program, or the iFIT.com mode is selected.
U. Program profiles—These profiles show how the
speed and incline of the treadmill will change during
preset programs and how the target heart rate will
change during pulse programs.
Note: The console can display exercise feedback
in either miles or kilometers (see SPEED DISPLAY
on page 11). For simplicity, all instructions in this
section refer to miles.