ProForm PFTL61931 User Manual

Model No. PFTL61931

Visit our website at

www.proform.com

new products, prizes,

fitness tips, and much more!

Serial No.

Write the serial number in the
space above for future reference.

Serial Number Decal

QUESTIONS?

If you have questions, or if there
are missing parts, we will guar­antee complete satisfaction
through direct assistance from
our factory.

TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL­FREE CUSTOMER HOT LINE.
The trained technicians on our
Customer Hot Line will provide
immediate assistance, free of
charge to you.

USER'S MANUAL

CUSTOMER HOT LINE:

1-888-533-1333

Mon.–Fri., 6 a.m.–6 p.m. MST

CAUTION

Read all precautions and instruc
tions in this manual before using
this equipment. Save this man
ual for future reference.

-

-

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY AND PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

TREADMILL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached in the center of this manual.

PROFORM is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described in this
manual.

3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it and two
feet on each side. Do not place the treadmill
on any surface that blocks air openings. To
protect the floor or carpet from damage, place
a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or oxygen is administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 250 pounds. Never allow
more than one person on the treadmill at a time.

8. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wear ath-

letic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.

9. When connecting the power cord (see page 10),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.

Use only a single-outlet surge suppressor that

10.
meets all of the specifications described on
page 10. To purchase a surge suppressor, see
your local PROFORM dealer or call 1-888-533­1333 and order part number 146148.

11. Failure to use a properly functioning surge
suppressor could result in damage to the con­trol system of the treadmill. If the control sys­tem is damaged, the walking belt may change
speed or stop unexpectedly, which may result
in a fall and serious injury.

12. Keep the power cord and the surge suppres­sor away from heated surfaces.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the tread­mill is not working properly.)

14. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails or the upper body arms while using
the treadmill.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

16. The pulse sensor is not a medical device.
Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

17. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and move the reset/off circuit
breaker to the off position when the treadmill
is not in use. (See the drawing on page 5 for
the location of the circuit breaker.)

18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD

TREADMILL on page 25.)

AND MOVE
You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.

When folding or moving the treadmill, make

19.
sure that the storage latch is fully closed.

THE

3

20. When using iFIT.com CDs and videos, an
electronic “chirping” sound will alert you
when the speed of the treadmill is about to
change. Always listen for the “chirp” and be
prepared for speed changes. In some in­stances, the speed may change before the
personal trainer describes the change.

21. When using iFIT.com CDs and videos, you
can manually override the speed setting at
any time by pressing the speed buttons.
However, when the next “chirp” is heard, the
speed will change to the next settings for the
CD or video program.

22. Always remove iFIT.com CDs and videos from
your CD player or VCR when you are not
using them.

23. Inspect and properly tighten all parts of the
treadmill every three months.

24. Never drop or insert any object into any open­ing.

25. DANGER: Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

26. The treadmill is intended for in-home use
only. Do not use the treadmill in any
commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown below have been placed on your treadmill. If a decal is missing or illegi­ble, please call our Customer Service Department toll-free at 1-888-533-1333 to order a free
replacement decal. Apply the decal in the location shown. Note: The decals are not shown
actual size.

4

BEFORE YOU BEGIN

Congratulations for purchasing the PROFORM
CROSSWALK ADVANCED CR treadmill. The CROSS­WALK ADVANCED CR treadmill offers an impressive
array of features to help you achieve your fitness goals
in the convenience of your home. From the advanced
console to the cushioned walking platform, the
CROSSWALK ADVANCED CR treadmill is designed
to make each workout more effective and enjoyable.
And when you’re not exercising, the treadmill can be
folded away, taking less than half the floor space of
conventional treadmills.

For your benefit, read this manual carefully before

Accessory Tray

Handrail

Latch Knob

®

using the treadmill.

ing this manual, call our Customer Service Department
toll-free at 1-888-533-1333, Monday through Friday, 6
a.m. until 6 p.m. Mountain Time (excluding holidays).
To help us assist you, please note the product model
number and serial number before calling. The model
number is PFTL61931. The serial number can be
found on a decal attached to the treadmill (see the
front cover of this manual for the location).

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

If you have questions after read-

Fan

Console

Handgrip Pulse Sensor

Key/Clip

Walking Belt

Foot Rail

BACK

Rear Roller
Adjustment Bolts

Upper Body Arm

Reset/Off

Circuit Breaker

Power Cord

Cushioned Walking Platform

RIGHT SIDE

5

ASSEMBLY

3/4” Screw (6)–12

1” Bolt (71)–2

Internal Star

Washer (72)–2

1” Tek Screw (25)–4

1” Screw (117)

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor­mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.

Assembly requires the included allen wrenches and your own Phillips screwdriver ,
wire cutters , and rubber mallet .

For help identifying the assembly hardware, see the drawings below. Note: The assembly hardware and other
small parts are packaged in separate part bags. If a part is not found in the part bags, check to see if the part

has been preassembled.

1. With the help of a second person, carefully raise the
treadmill to the upright position as shown.

Insert one of the Extension Legs (106) into the treadmill
as shown. Make sure that the Extension Leg is turned so
the Base Pad (100) is on the bottom. If necessary, tip the
Uprights (82) forward as you insert the Extension Leg.

Insert the other Extension Leg (not shown) in the same
way.

Note: To prevent damage to the Upper Body Arms (35) if
they are moved too far sideways, the lower end of each
Upper Body Arm features a breakaway connector. If one
of the Upper Body Arms breaks away, simply press the
lower end back onto the Ball Joint (7 [not shown]).

1

82

35

35

106

100

6

2. With the help of a second person, carefully lower the
Uprights (82) as shown. Note: It may be helpful to place
your foot on one of the Wheels (108) as you tip the
Uprights.

main in the Uprights.

Make sure that the Extension Legs (106) re-

2

Attach each Extension Leg (106) with two 1” Tek Screws
(25) and a Base Pad (100) as shown. Note: Attach the
lower Tek Screw (without the Base Pad) first.

Note: One replacement Base Pad (100) may be in­cluded. If a Base Pad becomes worn and needs to be re­placed, use the replacement Base Pad.

With the help of a second person, carefully tip the
Uprights (82) back to the vertical position.

3. With the help of a second person, hold the Console
Base (85) near the Uprights (82) as shown.

Connect the Wire Harness (83) to the wire harness in
the Right Handrail Bracket (113). Make sure to connect

the connectors properly (see the inset drawing). The
connectors should slide together easily and snap
into place. If the connectors do not slide together easily

and snap into place, turn one connector and then try
again. IF THE CONNECTORS ARE NOT CONNECTED

PROPERLY, THE CONSOLE MAY BE DAMAGED
WHEN THE POWER IS TURNED ON. Insert the wire

harnesses into the right Upright (82).

3

72

73

82

106

71

100

108

82

25

85

72

71

106

100

25

Hold the Handrail Brackets (73, 113) on top of the
Uprights (82). Finger tighten two 1” Bolts (71) with
Internal Star Washers (72) into the Handrail Brackets
and the Uprights. Press the Handrail Brackets to-
wards the center of the treadmill. Then, tighten both
Bolts.

4. Attach the Storage Latch (76) to the left Upright (82) with
two 3/4” Screws (6). Make sure that the large hole in the
Storage Latch is on the side shown.

Remove the knob from the pin. Make sure that the collar
and the spring are on the pin. Insert the pin into the
Storage Latch (76), and then tighten the knob back onto
the pin.

83

113

83

4

Knob

6

76

82

82

Large

Hole

Collar

Pin

Spring

7

5. Identify the Left and Right Handrails (68, 81); the curved
edges of the Handrails should be on the outside (see the
end views of the Handrails in the inset drawing).

Slide the Right Handrail (81) onto the Right Handrail
Bracket (113), and press the lip on the front of the Right
Handrail under the Console Base (85). (Note: It may be
helpful to tip the Right Handrail and to tap it with a rub­ber mallet to correctly position it.) Tighten two 3/4”
Screws (6) and a 1” Screw (117) into the Right Handrail
in the locations shown. Note: It may be necessary to
move the lower end of the Right Handrail slightly to align
the lower screw hole.

Attach the Left Handrail (68) in the same way.

5

68

6

Curved Edge

117

81

Lip

85

113

6

(81)

6. Attach each Upper Body Arm Holder (77) to an Upright
(82) with two 3/4” Screws (6).

7. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the
walking belt (see page 28). To protect the floor or carpet, place a mat under the treadmill.

6

(68)

117

77

82

77

6

82

6

8

If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the re­ceiver and the short jumper wire included with the chest pulse sensor.

1. Make sure that the power cord is unplugged. Remove

the indicated 3/4” Screw (6) and the Access Door (94)
from the back of the Console Back (95).

2. Remove the paper from the adhesive pad on the back of

the receiver (A).

der is near the lower edge of the receiver and is fac­ing the Console (88) as shown. Firmly press the re-

ceiver onto the indicated corner of the Access Door (94).
Connect the wire on the receiver to the indicated wire ex­tending from the Console.

Make sure that no wires are pinched. Reattach the

3.

Access Door (94) with the 3/4” Screw (6). The other wires
included with the receiver may be discarded.

Hold the receiver so the small cylin

-

Wire

Cylinder

95

A

88

Wire

94

6

9

TREADMILL OPERATION

THE PERFORMANT LUBETMWALKING BELT

Your treadmill features a walking belt coated with
PERFORMANT LUBE

IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat­form. Such substances will deteriorate the walking
belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

TM

, a high-performance lubricant.

DANGER: Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service­man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of

your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right). To purchase a surge suppressor, see
your local PROFORM dealer or call toll-free 1-888­533-1333 and order part number 146148.

an equipment-grounding conductor and a grounding
plug.

Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus­trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.

1

Grounded Outlet Box

Surge Suppressor

Grounding Pin

Grounding Pin

Grounded Outlet

2

Grounded Outlet Box

Adapter

Grounding Plug

Surge Suppressor

Use only a single-outlet surge suppressor that is
UL 1449 listed as a transient voltage surge sup­pressor (TVSS). The surge suppressor must have a
UL suppressed voltage rating of 400 volts or less
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated
for 120 volts AC and 15 amps. There must be a
monitoring light on the surge suppressor to indi­cate whether it is functioning properly. Failure to
use a properly functioning surge suppressor could
result in damage to the control system of the
treadmill. If the control system is damaged, the
walking belt may change speed or stop unexpect
edly, which may result in a fall and serious injury.

This product must be grounded.

tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec­tric shock. This product is equipped with a cord having

If it should malfunc

-

Lug

Metal Screw

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.

The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw.

-

covers are not grounded. Contact a qualified elec­trician to determine if the outlet box cover is
grounded before using an adapter.

Some 2-pole receptacle outlet box

10

Fan Button

Key

Note: If there are sheets of clear plastic on the console, remove them.

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of
features designed to help you get the most from your
workouts.

While the manual mode of the console is selected, the
speed and incline of the treadmill can be changed with
the touch of a button. As you exercise, the console will
display instant exercise feedback. You can even mea­sure your heart rate using the handgrip pulse sensor or
the optional chest pulse sensor (see page 23).

In addition, the console offers four preset programs.
Each program automatically controls the speed and in­cline of the treadmill as it guides you through an effec­tive workout. Two heart rate programs are also offered.
Each program adjusts the speed and incline of the
treadmill to keep your heart rate near a target heart rate
while you exercise.
quire the use of the optional chest pulse sensor.

The console also features iFIT.com interactive technol­ogy. Having iFIT.com technology is like having a per

Note: The heart rate programs re-

-

Clip

sonal trainer in your home. Using the included audio
cable, you can connect the treadmill to your home
stereo, portable stereo, computer, or VCR and play
special iFIT.com CD and video programs. iFIT.com CD
and video programs automatically control the speed
and incline of the treadmill as a personal trainer guides
you through every step of your workout. High-energy
music provides added motivation.

iFIT.com CDs or videocassettes, visit our Web site
at www.iFIT.com.

With the treadmill connected to your computer, you
can also go to our Web site at www.iFIT.com and ac­cess programs directly from the internet. Additional op
tions are soon to be available. See www.iFIT.com for

more information.

To use the manual mode of the console, follow the

steps beginning on page 12. To use a preset program,
see page 14. To use a heart rate program, see page

16. To use an iFIT.com CD or video
page 20. To use iFIT.com programs directly from

our Web site, see page 22.

To purchase other

program

, see

-

1

1