ProForm PFTL49500 User Manual

USER'S MANUAL

Serial
Number
Decal

Model No. PFTL49500
Serial No.

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis­faction through direct assistance
from our factory.

TO AVOID UNNECESSARY DE­LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni­cians on our Customer Hot Line
will provide immediate assis­tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

®

Visit our website at

www.proform.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and PART LIST are attached in the center of this manual. Please save them for
future reference.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described in this
manual.

3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 250 pounds.

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth­ing that could become caught in the treadmill.

Athletic support clothes are recommended for
both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

10. When connecting the power cord (see page 7),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit. Do not use an extension
cord.

11. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissi­pation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor, see
your local PROFORM dealer or call 1-800-999­3756 and order part number 146148.

12. Keep the power cord and the surge suppres­sor away from heated surfaces.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the tread­mill is not working properly.)

WARNING:To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

2

14. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails or the upper body arms while using
the treadmill.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

16. Never leave the treadmill unattended while it is
running. Always remove the key and unplug
the power cord when the treadmill is not in
use.

17. The pulse sensor is not a medical device.
Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

18. Do not att empt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO FOLD
AND MOVE THE TREADMILL on page 10.) You
must be able to safely lift 45 pounds (20 kg) in

order to raise, lower, or move the treadmill.

19. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

20. Inspect and tighten all parts of the treadmill
every three months.

21. Never drop or insert any object into any
opening.

22.

DANGER:Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

23. This treadmill is intended for in-home use
only. Do not use this treadmill in any com­mercial, rental, or institutional setting.

WARNING:Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown below has been placed on your treadmill. If the
decal is missing, or if it is not legible, please call our Customer
Service Department, toll-free, to order a free replacement decal
(see ORDERING REPLACEMENT PARTS on the back cover of
this manual). Apply the decal in the location shown.

Note: This decal is shown at 38% of actual size.

3

Thank you for selecting the PROFORM®CROSS­WALK 1560 treadmill. The CROSSWALK 1560 tread­mill combines advanced technology with innovative de­sign to let you enjoy an excellent form of cardiovascu­lar exercise in the convenience and privacy of your
home. And when you’re not exercising, the unique
CROSSWALK 1560 can be folded up, requiring less
than half the floor space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is PFTL49500. The serial num­ber can be found on a decal attached to the treadmill
(see the front cover of this manual for the location).

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Handrail

Upper Body Arm

Console

Storage Latch

Key/Clip

Circuit

Breaker

Incline
Leg

Walking Belt

Hood

Cushioned Walking
Platform

Wheel

Foot Rails

Power Cord

Rear Roller
Adjustment Bolts

Water Bottle

Holder (Bottle

not included)

Towel Rack

Accessory Tray

Upper Body Arm

RIGHT SIDE

LEFT SIDE

4

Note: The underside of the treadmill walking belt is coated
with high-performance lubricant. During shipping, a small
amount of lubricant may be transferred to the top of the walk­ing belt or the shipping carton. This is a normal condition and
does not affect treadmill performance. If there is lubricant on
top of the walking belt, simply wipe off the lubricant with a soft
cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the
Uprights (14), the Right Handrail (32), and the Console Base
(6) until the treadmill is in the position shown. Be careful not
to pull on the Wire Harness (26). Set the Right Handrail on
the right Upright until step 2 is completed.

Refer to the inset drawing. Insert one of the Extension
Legs (41) into the treadmill as shown. (Note: It may be
helpful to tip the Uprights [14] in the direction shown by the
arrow as you insert the Extension Leg.) Make sure that the
Base Pad (36) is on the bottom of the Extension Leg.
Attach the Extension Leg with an Extension Leg Screw
(34). Be sure to push on the head of the Extension Leg

Screw while tightening it.

Attach the other Extension Leg (41) in the same way.

2. Position the Left Handrail (2) on the left Upright (14) as
shown. Thread a Handrail Bolt (15) with a Handrail Washer
(16) into the left Upright and the Left Handrail. Do not

tighten the Handrail Bolt yet.

Attach the lower end of the Left Handrail (2) to the
Extension Leg (41) with a 3 1/2” Handrail Bolt (89), a 3/8”
Washer (70), and a Handrail Nut (57). Do not tighten the

Handrail Bolt yet.

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small
parts used in assembly. Assembly requires the included allen wrench and your own phillips screw-

driver , adjustable wrench , open end wrench and scissors .

5

89

15

2

70

16

14

57

41

2

1

34

41

14

36

26

32

14

6

Extension Leg Screw (34)–2

Handrail Washer (16)–2

Handrail Nut (57)–2

3/8" Washer (70)–2

Console Screw (94)–4

3 1/2" Handrail Bolt (89)–2

Handrail Bolt (15)–2

3/4" Screw (13)–2

26

32

Plastic Tie

14

3

6

Bracket

89

70

15

16

14

32

57

41

4

6

3. With the help of a second person, lift the Right Handrail (32)
off the right Upright (14). Hold the Console Base (6) and the
Right Handrail in the position shown. Feed all of the excess
Wire Harness (26) into the Right Handrail (32) and through
the indicated bracket. Make a fold in the Wire Harness (26)
as shown. Feed the Harness and fold into the right Upright.

Cut the indicated plastic tie off the Right Handrail (32).
Make sure that the Wire Harness (26) is in the bracket

and insert the bracket into the right Upright (14). Make

sure that the Wire Harness is not pinched.

4. Thread a Handrail Bolt (15) with a Handrail Washer (16)
into the right Upright (14) and the Right Handrail (32). Do

not tighten the Handrail Bolt yet.

Attach the lower end of the Right Handrail (32) to the
Extension Leg (41) with a 3 1/2” Handrail Bolt (89), a 3/8”
Washer (70), and a Handrail Nut (57).

Tighten all parts used in this step and in step 2.

5. Attach the Console Base (6) to the Left and Right
Handrails (2, 32) with the four Console Screws (94).

The console requires two "AA" batteries (not included).
Alkaline batteries are recommended. To install batteries,
open the battery cover as shown at the right. Press the
batteries into the battery compartment, with the negative
(–) ends of the batteries touching the springs. Close the
battery cover, push up on the tab, and then push the tab
forward. Be sure that the tab locks into place.

6. Attach the Storage Latch (12) to the left Upright (14) with

two 3/4” Screws (13). Be careful not to overtighten the

Screws.

7. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place

a mat under the treadmill.

94

94

6

Tab

2

Batteries

9

32

5

14

12

6

13