odel No. PFMC0825.0
Visit our website at
www.iconservice.com
M
Serial No.
Write the serial number in the
space above for future reference.
QUESTIONS?
As a manufacturer
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CUSTOMER HOT LINE:
, we are com-
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
USER’S MANUAL
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
EFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
B
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PART LIST/EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
IMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
L
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
. Read all instructions in this manual and in the
1
literature accompanying the resistance system before using the resistance system. Use
the resistance system only as described in
the literature.
. When adding resistance, both ends of the
6
resistance bars must rest under the two “U”channels. Add and remove resistance bars
from the “U”-channels one resistance bar at a
time.
2. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
3. Keep children under 12 and pets away from
the resistance system at all times.
4. Keep hands and feet away from moving parts.
5. Use only the resistance included with a MAX
PACK. Do not use other types of weight with
the resistance system.
7. Keep clear of the area around the “U”-channels while the resistance system is in use. Do
not add or remove resistance bars from the
“U”-channels while the end of the long cable
is pulled out.
8. Make sure that all parts are properly tightened each time the resistance system is
used. Replace any worn parts immediately.
9. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cooling down.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
BEFORE YOU BEGIN
Thank you for selecting the MAX PACK resistance system. The MAX PACK uses progressive resistance. As
the resistance bars begin to bend, the amount of resistance will increase gradually.
bend further, the resistance will increase rapidly. The
MAX PACK is designed to increase the amount of
resistance available on the resistance system.
For your benefit, read this manual carefully before
using the MAX PACK and the resistance system. If
you have questions after reading this manual, see the
As the resistance bars
front cover of this manual. T
please note the product model number and serial
number before calling. The model number is
PFMC0825.0. The serial number can be found on the
product packaging. Record the serial number on the
front cover of this manual.
o avoid a registration fee for any service needed
T
under warranty, you must register the MAX PACK
at www.iconservice.com/registration.
o help us assist you,
3
ASSEMBLY
Before beginning assembly, carefully read the
ollowing information and instructions:
f
• Assembly requires two people.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Make sure all parts are oriented as shown in the
drawings.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1.
Before beginning assembly, make sure that
you have read and understand the information in the box above.
Attach a 100-pound Cap (3) to one end of the
100-pound Bar (2) with an M4 x 12mm Flat Head
Screw (4). Attach the other Cap in the same
manner.
The following tools (not included) may be
required for assembly:
• One standard screwdriver
• One Phillips screwdriver
• One hex key (included
with the MAX PACK
resistance system)
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
2
3
4
2. Locate the Top Tray (A) on the resistance system.
Have a second person hold the Top Tray and the
Bottom Tray (not shown) together. Remove the
two indicated Button Bolts (B), the two Washers
(C), the two Nylon Locknuts (D), and the Tray
Cover (E) from the Top Tray.
3. Attach the Bracket (1) and the 100-pound Bar (2)
to the Tray Cover (E) with two M8 x 19mm Flat
Head Screws (5). Make sure that the 100-pound
Bar is centered over the Tray Cover and that
the Screws are fully tightened.
2
B
E
C
A
D
3
1
2
E
5
4
4. Attach the Tray Cover (E) to the Top Tray (A) with
the two Button Bolts (B), the two Washers (C),
nd the two Nylon Locknuts (D) removed in step 2.
a
5. Make sure that all parts have been properly tightened. To use the MAX PACK with your resistance
system, see ADJUSTING THE RESISTANCE in the resistance system user’s manual.
4
B
E
C
A
D
5
2
3
4
4
3
5
1
PART LIST—Model No. PFMC0825.0 R0706A
Key No. Qty. Description Key No. Qty. Description
1
2 1 100-pound Bar
3 2 100-pound Cap
4 2 M4 x 12mm Flat Head Screw
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the user’s manual for information about ordering replacement parts.
1 Bracket
5
# 1 User’s Manual
# 1 Hex Key
2 M8 x 19mm Flat Head Screw
EXPLODED DRAWING—Model No. PFMC0825.0 R0706A
6
NOTES
7
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give
he following information:
t
• the MODEL NUMBER of the product (PFMC0825.0)
the NAME of the product (MAX PACK resistance system)
•
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING on page
6 of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions. ICON warrants the resistance bars for the lifetime of the product, and all other parts for five (5) years from the date of purchase. Shipping of the resistance bars is not covered. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to
replacing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs
for which warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service
center, freight charges to and from the service center will be the customer’s responsibility. For in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend to any product
or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal
usage or repairs not provided by an ICON authorized service center; products used for commercial or rental
purposes; or products used as store display models. No other warranty beyond that specifically set forth above
is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 228721 R0706A Printed in China © 2006 ICON IP, Inc.
Loading...