Model No. PFIVEX5703.0
Serial No. ___________
Write the serial number in the
space above for reference.
QUESTIONS ?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
USERʼS MANUAL
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website
www.iconsupport.eu
This product should
always be used on a
level surface.
This product is not
intended for
therapeutic use.
Misuse of this machine
may result in serious
injury.
Read user’s manual
prior to use and follow
all warnings and
instructions.
Do not allow children
on or around machine.
User weight must not
exceed 250 pounds.
Replace label if
damaged, illegible,
or removed.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . .
IMPORTANT PRECAUTIONS
. . .
. . . . . . . .
. .
. . . . . . . .
. .
. . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
CONSOLE FEATURES. . . . . . . . . . . . . . . . . .
HOW TO OPERATE THE BIKE . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HOW TO MEASURE YOUR PULSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MAINTENANCE AND TROUBLESHOOTING. . . . . . . . . . . . .
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . .
. . . . . . . . . . .
EXPLODED DRAWINGS. . . . . . . . . . . . . . . . . . . . . . . . .
PART LIST . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last page
WARNING DECAL PLACEMENT
This drawing shows the location(s) of
the warning decal(s). If a decal is missing or illegible, call the telephone number on the front cover of this manual
and request a free replacement decal.
Apply the decal in the location shown.
Note: The decal(s) may not be shown
at actual size.
1
IMPORTANT PRECAUTIONS
WARNING : To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical before using your elliptical. ICON
assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or
persons with pre-existing health problems.
2. Use the elliptical only as described in this
manual.
3. It is the responsibility of the owner to ensure
that all users of the elliptical are adequately
informed of all precautions.
4. The elliptical is intended for home use only.
Do not use the elliptical in a commercial,
rental, or institutional setting.
5. Keep the elliptical indoors, away from
moisture and dust. Place the elliptical on a
level surface, with a mat beneath it to protect
the oor or carpet. Make sure that there is at
least 3 ft. (0.9 m) of clearance in the front and
rear of the elliptical and 2 ft. (0.6 m) on each
side.
6. Inspect and properly tighten all parts
regularly. Replace any worn parts
immediately.
7. Keep children under age 12 and pets away
from the elliptical at all times.
8.The elliptical should not be used by persons
weighing more than 250 lbs. (115 kg).
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the elliptical. Always wear athletic
shoes for foot protection while exercising.
10. Hold the handlebars or the upper body
arms when mounting, dismounting, or using
the elliptical.
11. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in
determining heart rate trends in general.
12. The elliptical does not have a freewheel;
the pedals will continue to move until the
ywheel stops. Reduce your pedaling speed
in a controlled way.
13. Keep your back straight while using the
elliptical; do not arch your back.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
2
BEFORE YOU BEGIN
Thank you for purchasing the ProForm® 375 ZLX.
The elliptical provides an array of features designed to make your workouts at home more effective and enjoyable.
For your benet, read this manual carefully before you use the elliptical. If you have questions
after reading this manual, please see the front
cover of this manual. To help us assist you, note
the product model
number and serial number before contacting us.
The model number is PFIVEX5703.0 and the location of the serial number decal are shown on the
front cover of this manual.
Before reading further, please familiarize yourself
with the parts that are labeled in the drawing below.
3
ASSEMBLY
35
71
41
65
STEP 1
Lift the front of the main frame and t the Front
Stabilizer (65) with 2 x Carriage Bolts (41), 2 x
Curved Washers (36), 2 x Spring Washers (71) and
2 x Cap Nuts (35). Now repeat this process for the
Rear Stabilizer (40).
STEP 2
Attach right pedal (26R) on the right pedal crank.
(NOTE: The screw direction is clockwise).
Now repeat this process for the left pedal (26L).
(NOTE: The screw direction is anti-clockwise).
65
35
71
36
40
41
26L
Then mount the pedal straps left and right on the
associated pedals.
Note : The pedals are signed with “L” for left
and “R’ for Right.
STEP 3
Carefully lift the Handlebar Post (72) until it is vertical. Slide the front plastic cover (68) onto handlebar post (72). Join the upper Computer Cable (69)
to the lower Computer Cable (67). Then put the
Handlebar Post into Main Frame, and secure them
with 4 Curved Washers (36), 4 Spring Washers
(71) and 4 Allen Bolts (70).
26R
72
70
36
71
69
68
67
66
4
STEP 4
21
10
11
9
4
10
11
9
4
15
16
20
14
21
13
Take the Handlebar (9) and x into place using Metal
Spacer (10) and Knob (11).
Make sure you slide the Hand Pulse Cable (4) over the
Computer Bracket through the hole on the back of handlebar post. Tighten fully.
STEP 5
11
9
4
10
Remove three preassembled washers (13) and nylon
nuts (14) from back of the seat.
Attach the Seat onto Sliding Set (16) and secure them
with three washers (13) and three nylon nuts (14).
Attach the seat with sliding set onto Seat post (21), keep
the bolt on the sliding set outside.
19
13
14
15
16
21
20
Then secure the bolt with at washer (19) and knob (20)
tightly.
STEP 6
Put the Seat Post (21) into Main Frame.
Select a suitable height setting and secure in place with
the Seat Support Adjuster Knob.
Note : Further more, you must ensure when setting
21
this desired position that the seat pillar is not pulled
out of the main frame further than the highest setting position, which is marked.
STEP 7
Remove the 4 pre-tted Screws (2) from the backside of
the Computer (1).
Connect the Upper Computer Cable (69) and two hand
pulse cable (4) with the cable on the back of computer
(1) separately, then secure the computer onto Handlebar Post Bracket using the 4 previously removed Screws
(2).
Attach the Handlebar Cover (3L+R) onto handlebar with
4 Screws (6).
Now, your machine is ready for use.
3L
1
6
3R
4
69
2
5
CONSOLE FEATURES
CONSOLE FEATURES
Follow your progress with the display.
The console has six displays that show the following
workout information:
Speed—This display shows your pedaling speed,
in revolutions per minute (rpm).
Time—This display shows the elapsed time.
Note: When a smart program is selected, the display
will show the time remaining in the program
instead of the elapsed time.
Distance—This display shows the distance you
have pedaled, in total revolutions.
Calories—This display shows the approximate
number of calories you have burned.
Fat Calories—This display shows the approximate
number of fat calories you have burned.
Watts—This display shows the watts you developed
during the workout.
workout or during the setting mode to increase the
values of Time, Distance, Calories, Age or Gender or
programs.
ENTER :
During the time setting mode, press this button to
validate the hours and minutes.
During the setting mode, press this button to
validate the adjusted values.
During the STOP mode, press this button to reset
the values.
START/STOP:
For a quick start, press this button to start the
counting of the console, it will start at 0. If you hold
this button for more than 2 sec it rests the values.
PULSE RECOVERY :
Press this button to activate the recovery test.
3. Start pedaling and follow your progress with
the display :
While you exercise, the console will display the
selected mode.
4. When you are nished exercising, the console
will automatically turn off.
If the pedals do not move for a few seconds, the
word STOP will appear in the display, and the
console will pause. The console has an “autooff” feature. If the pedals do not move and the
console buttons are not pressed for a few minutes,
the power will turn off automatically to save the
batteries.
How to use the Pulse Recovery Test :
HOW TO USE THE CONSOLE
Make sure to plug the power adapter (see page
11, HOW TO PLUG IN THE POWER ADAPTER).
If there is a sheet of clear plastic on the face of the
console, remove it.
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2. Press the buttons :
UP:
Press this button to increase the resistance during the
workout or during the setting mode to increase the
values of Time, Distance, Calories, Age or gender or
the programs.
DOWN :
Press this button to increase the resistance during the
6
It is a function to check the condition of pulse
recovery that is scaled from 1.0 to 6.0 while 1.0
means the best and 6.0 means the worst and the
increment is 0.1. In order to get rated correctly,
users must test it right after the workout nished by
pressing “TEST(RECOVERY) ” key and then stop
exercising. After the key is pressed, please also
apply the heart rate detector appropriately, the test
will last for 1 minute and the result will show in the
display. If the computer does not detect your current
heart rate, pressing “TEST(RECOVERY) ” will not
enter into pulse recovery test. During the pulse
recovery test, press “TEST(RECOVERY) ” to exit
the test and return to the stop status.
1. Turn on the console.
To turn on the console, press the On/Reset button
or begin pedaling. The entire display will light for a
moment; the console will then be ready for use.
2. Select the manual mode.
When you turn on the console, the manual mode will
be selected. If you have selected a program,
reselect the manual mode by pressing the Smart
Programs button repeatedly until zeros appear in
the display.
Press the UP ou DOWN to select Program 1. The
resistance level is 5 by default. TIME wil ash on
the console, press the UP and DOWN button to
select the length of your workout. Press ENTER
to validate. Then do as before for the DISTANCE,
CALORIES and PULSE. Finally press START/STOP
button to start.
3. Change the resistance of the pedals as
desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons. There are ten resistance levels. Note: After
you press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
4. Follow your progress with the display.
The console displays the elapsed time and the
distance you’ve pedaled. Note: When a smart
program is selected, the display will show the time
remaining in the program instead of the elapsed
time.It also displays your pedaling speed (in RPM),
the calories and fat calories you ‘ve burnt and also
your heart rate when you use the handgrip pulse
sensor.
5. Measure your heart rate if desired.
Note: If there are sheets of clear plastic on the metal
contacts of the handgrip pulse sensor, remove the
plastic. To measure your heart rate, hold the handgrip
pulse sensor, with your palms resting against the
metal contacts. Avoid moving your hands or gripping
the contacts tightly. When your pulse is detected, the
heart-shaped indicator in the display will ash each
time your heart beats and two dashes will appear.
After a moment, your heart rate will be shown in the
display. For the most accurate heart rate reading,
continue to hold the handgrips for about 15 seconds.
Note: If you continue to hold the handgrip pulse
sensor, the display will show your heart rate for
up to 30 seconds. The display will then show your
heart rate along with the other modes. If your heart
rate is not shown, make sure that your hands are
positioned as described. Be careful not to move your
hand excessively or to squeeze the metal contacts
too tightly. For optimal performance, clean the
metal contacts using a soft cloth; never use alcohol,
abrasives, or chemicals to clean the contacts.
6. When you are nished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
time will ash in the display and the console will
pause.
If the pedals do not move for a few minutes, the
console will turn off and the display will be reset.
HOW TO USE THE PRESET PROGRAMS :
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2.Select your preset program
Press the ENTER button then turn the UP/DOWN
button to select a program from 1 to 10. Select your
program according to your goals and proles that is
displayed on the console.
3.Adjust the program according to your daily
goals :
TIME will ash on the console, press the UP or
DOWN button to select the length of your workout.
Press the ENTER button to validate. DISTANCE
will then ash, repeat the operations to select and
validate the distance. Do as before for CALORIES
and PULSE. Finally, press the START/STOP button
to start your workout.
4. Change the resistance of the pedals as
desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons. There are ten resistance levels. Note: After
you press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
5. When you are nished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
time will ash in the display and the console will
pause. If the pedals do not move for a few minutes,
the console will turn off and the display will be reset.
7
WATT PROGRAM :
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2.Select your preset program
Press the UP and DOWN button to select program
11 (written WATT). Wait until the word PROGRAM
begins ashing. Press the ENTER button to
validate.
3.Entering your datas
TIME will ash, press the UP and DOWN button to
select your TIME, then press the UP and DOWN
button to select your DISTANCE and WATTS. Press
the ENTER button to validate. FInally, press START/
STOP to start.
Program 12 corresponds to 55% of Max HRC
Program 13corresponds to 75% of Max HRC
Program 14 corresponds to 90% of Max HRC
Program 15 you dene your HRC traget
The HRC is calculated as follow : 220- your age. For
instance, for a person of 35 years old : 220-35 = 185
pulse/min.
3. Entering your datas
AGE will ash, press the UP and DOWN button to
select your AGE, then press the UP and DOWN
button to select your target, then press ENTER to
validate.
Do as before, to set up TIME, DISTANCE and
CALORIES. FInally, press START/STOP to start.
4. Change the resistance of the pedals as
desired.
This program depends on your speed, as a
consequence, you cannot adjust your resistance
level.
4. Change the resistance of the pedals as
desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons. There are ten resistance levels. Note: After
you press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
5. When you are nished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
time will ash in the display and the console will
pause. If the pedals do not move for a few minutes,
the console will turn off and the display will be reset.
HEART RATE CONTROL PROGRAMS :
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons. There are ten resistance levels. Note: After
you press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
5. When you are nished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
time will ash in the display and the console will
pause. If the pedals do not move for a few minutes,
the console will turn off and the display will be reset.
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2.Select your preset program
Press the UP and DOWN button to select program
12 to 15. Wait until the word PROGRAM begins
ashing. Press the ENTER button to validate.
Each program corresponds to a specic target :
8
USER SETTING PROGRAMS :
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
Press the UP and DOWN button to select program
20 (written FAT). Wait until the word PROGRAM
begin ashing. Press the ENTER button to
validate. Program 8 is a special program designed
to calculate users’ body fat ratio and to design a
specic loading prole for users.
2.Select your preset program
Press the UP and DOWN button to select program
16 to 19 (written Custom 1, 2, 3 or 4). Wait until the
word PROGRAM begins ashing. Press the ENTER
button to validate.
3.Entering your datas
Users are free to edit the values in the order of
TIME, DISTANCE, CAL, AGE, and the level of
resistance in 10 intervals. The values and proles
will be stored in the memory after setup.
To do that, once the program is selected and yo
pressed the ENTRE button, the rst column will be
ashing and you’ll use the UP and DOWN button
to create your prole. Press ENTER to validate,
you’ll then move on the 2nd column. Do the same
as before for the 10 columns. Finally press START/
STOP button to start.
4. Change the resistance of the pedals as
desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons. There are ten resistance levels. Note: After
you press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
If the pedal do not move for a few seconds, the word
STOP will appear in the display, and the console will
pause. The console has an “auto-off” feature. If the
pedals do not move and the console buttons are not
pressed for a few minutes, the power will turn off
automatically to save the batteries.
3.Entering your datas
With 4 different body types, the computer can
generate 4 different proles for each. Press
“ENTER” key to select GENDER, HEIGHT WEIGHT,
and AGE. Then, press UP or DOWN button to adjust
the values. After pressing “START/STOP” key to
calculate body fat, please also apply the heart rate
detector appropriately. If the detector cannot pick
up any signals, an error message “Err” will show up
in the prole display. If it happens, press “START/
STOP” key to calculate again. Then, the calculation
values of FAT%, BMR, BMI, BODY TYPE, and a
designed prole will show up shortly. Press “START/
STOP” key to exercise. The prole shown in the
display is specially designed for your body type.
4. Start pedaling and change the resistance of
the pedals as desired.
As you pedal, change the resistance of the pedals
by pressing the resistance increase and decrease
buttons. There are ten resistance levels. Note: After
you press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
5. When you are nished exercising, the console
will turn off automatically.
If the pedals do not move for a few seconds, the
time will ash in the display and the console will
pause. If the pedals do not move for a few minutes,
the console will turn off and the display will be reset.
BODYFAT PROGRAMS :
1. Turn on the console
To turn on the console, press any button on the
console or simply begin pedaling.
2.Select your preset program
9
HOW TO OPERATE THE EXERCISE CYCLE
Bouton
de réglages
HOW TO ADJUST THE PEDAL STRAPS
HOW TO ADJUST THE HEIGHT AND LATERAL
POSITION OF THE SEAT
For effective exercise,
the seat should be at
the proper height. As
you pedal, there should
be a slight bend in
your knees when the
pedals are in the lowest
position. To adjust the
height or the lateral
position of the seat,
rst loosen the seat post knob. Next, pull the
knob, slide the seat post upward or downward to
the desired position, and then release the knob.
Move the seat post upward or downward slightly
to make sure that the knob is engaged in one
of the adjustment holes in the seat post. Then,
tighten the knob.
To adjust the pedal straps, rst pull the ends of the
pedal straps off the tabs on the pedals. Adjust the
pedal straps to the desired position, and then press
the ends of the
pedal straps onto
the tabs.
Strap
Tab
HOW TO ADJUST THE HANDLEBAR
To adjust the
handlebar,
rst loosen the
adjustment handle.
Pivot the handlebar
forward or backward
to the desired
position
and then retighten
the
adjustment handle.
Knob
10
HOW TO MEASURE YOUR PULSE
Measure your heart rate if desired
You can measure you heart rate using either the
handgrip pulse sensor or the optional chest pulse
sensor.
Note: If you hold the handgrip pulse sensor and
wear the chest pulse sensor at the same time, the
console will not display your heart rate accurately.
If there are sheets of clear plastic on the metal
contacts on the handgrip pulse sensor, remove
the plastic. In addition, make sure that your hands
are clean. To measure your heart rate, hold the
handgrip pulse sensor with your palms resting
against the metal contacts. Avoid moving your
hands or gripping the contacts tightly.
Contacts
When you are nished exercising, the console
will turn off automatically.
If the pedals do not move for several seconds, a
tone will sound and the console will pause.
If the pedals do not move for several minutes and
the buttons are not pressed, the console will turn
off and the display will be resetéconomies des piles.
MAINTENANCE AND TROUBLESHOOTING
IInspect and tighten all parts of the exercise cycle
regularly.
Replace any worn parts immediately.
To clean the exercise cycle, use a damp cloth and a
small amount of mild detergent.
Important: To avoid damaging the console, keep
liquids away from the console and keep the console
out of direct sunlight.
11
EXERCISE GUIDELINES
WARNING:
Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35
or persons with pre-existing health problems.
The pulse sensor is not a medical device. Various factors may affect the accuracy of heart
rate readings. The pulse sensor is intended
only as an exercise aid in determining heart
rate trends in general.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use
your heart rate as a guide to nd the proper intensity
level. The chart below shows recommended heart
rates for fat burning and aerobic exercise.
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the rst few minutes of exercise, your
body uses carbohydrate calories for energy. Only af-
ter the rst few minutes of exercise does your body
begin to use stored fat calories for energy. If your
goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in
your training one. For maximum fat burning, exercise
with your heart rate near the middle number in your
training zone.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
WORKOUT GUIDELINES
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation for exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
he rst few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as
you exercise–never hold your breath.
To nd the proper intensity level, nd your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age dene your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is
the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise.
Cooling Down—Finish with 5 to 10 minutes of
stretching. Stretching increases the exibility of your
muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular ex-
ercise, you may complete up to ve workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
12
EXPLODED DRAWING—Model No. PFIVEX5703.0
26L
27
28
29L
30
31L
19
38
32
20
33
37
21
34
36
10
11
12
3R45
58
2
72
71
70
69
68
67
66
65
59
13
18
22
3L
23
17
24
16
25
15
6
7
8
9
14
35
1
73
74
75
64
63
62
39
40
41
42
43
44
45
13
46
57
47
56
48
55
49
54
50
60
61
31R
53
52
51
29R
26R
PART LIST—Model No.PFIVEX5703.0
Item
Description
1
Computer
2
Screw
3
Handlebar cover (L+R)
4
Hand pulse cable
5
End Cap
6
Screw
7
Hand pulse pads
8
Screw
9
Handlebar
10
Metal spacer
11
Knob
12
Handlebar foam
13
Washer
14
Nylon nut
15
Saddle
16
Sliding Set
17
Bolt
18
End Cap
19
Ф10*25*3t Washer
20
M10 Knob
21
Seat Post
22
Inner plastic cover
23
Quick pin
24
Sensor with cable
25
Screw
26
Pedal (L+R)
27
Crank end cap
28
M8*25 Bolt
29
Crank (L+R)
30
M5*20 Screw
31
Chain cover (L+R)
32
C shape clip
33
Waved washer
34
Flat washer
35
M8 Cap nut
36
Ф8 Curved washer
37
Main adaptor socket & lead
Qty.
1
4
1
2
2
4
2
2
1
1
1
2
3
3
1
1
1
2
1
1
1
1
1
1
1
1
2
2
1
6
1
2
1
2
4
8
1
Item
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
Description
Conducting wire
Rear end cap
Rear Stabilizer
M8 carriage bolt
M8 Nylon nut
Flat washer
M10 Nylon nut
Tube spacer
Bearing
Idler rack
Spring
M8*20 Carriage bolt
M10*38 Carriage bolt
End cap
M5*15 Screw
M4.5*25 Self-tapping screw
End cap
Belt
Nut
Flywheel
Motor
Belt wheel
Drive wheel shaft
Allen bolt
Plastic cover
Screw
Front end cap (L+R)
Front stabilizer
Main frame
Lower computer cable
Front plastic cover
Upper computer cable
M8 Allen bolt
Ф8 Spring washer
Handlebar post
Combination wrench
Allen key wrench
Adaptor
Qty.
1
2
1
4
1
1
1
1
4
1
1
1
1
2
8
5
2
1
2
1
1
1
1
3
1
2
1
1
1
1
1
1
4
8
1
1
1
1
14
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
IMPORTANT RECYCLING INFORMATION FOR E. U. CUSTOMERS
This electronic product must not be disposed of in municipal waste. To preserve
the environment, this product must be recycled after its useful life as required by
law. Please use recycling facilities that are authorized to collect this type of waste in
your area. In doing so, you will help to conserve natural resources and improve
European standards of environmental protection. If you require more information about
safe and correct disposal methods, please contact your local city ofce or the
establishment where you purchased this product.
SPECIFICATION :
Open Dimension : (L x l x h): 118 x 54 x 137 cm
Weight : 30 Kg
Printed in China © 2011 Icon Health & Fitness, Inc.
Loading...