ProForm PFEVEX924070 User Manual
Model No. PFEVEX92407.0
Serial No.
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer
satisfaction. If you have questions,
or if there are missing parts, please
contact us at the numbers or
addresses listed below:
Call: 08457 089 009
Outside UK: 0 (44) 113 3877133
USER'S MANUAL
Fax: 0 (44) 113 3877125
E-mail: csuk@iconeurope.com
rite:
W
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG,
UK
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
M
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
The warning decal shown here has been
applied in the location shown. If a decal is
missing or illegible, call the telephone number on the front cover of this manual and
request a free replacement decal. Apply the
decal in the location shown. Note: The decal
may not be shown at actual size.
PROFORM is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise cycle before using your exercise
cycle. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
2. Read all instructions in this manual and all
warnings on the exercise cycle before using
the exercise cycle.
3. Use the exercise cycle only as described in
this manual.
4. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.
5. The exercise cycle is intended for home use
only. Do not use the exercise cycle in a
commercial, rental, or institutional setting.
6. Keep the exercise cycle indoors, away from
moisture and dust. Place the exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the exercise cycle to mount, dismount, and use it.
7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
8. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exercise cycle. Always wear
athletic shoes for foot protection.
10. The exercise cycle should not be used by
persons weighing more than 250 lbs.
(113 kg).
11. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
12. Always keep your back straight while using
the exercise cycle; do not arch your back.
13. If you feel pain or dizziness while exercising,
stop immediately and cool down.
3
BEFORE YOU BEGIN
Congratulations for selecting the new PROFORM
AMEFIT BIKE exercise cycle. Cycling is one of the
G
ost effective exercises for increasing cardiovascular
m
fitness, building endurance, and toning the entire
body. The GAMEFIT BIKE exercise cycle offers a
selection of features designed to let you enjoy this
healthful exercise in the convenience and privacy of
your home.
For your benefit, read this manual carefully before
Game Controller
Console
Handlebar
®
using the exercise cycle. If you have questions after
eading this manual, please see the front cover of this
r
anual. To help us assist you, note the product model
m
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts labeled in the drawing below.
Pulse Sensor
Water Bottle Holder*
Seat
Seat Knob
Adjustment Knob
Leveling Foot
Pedal/Strap
Wheel
*No water bottle is included
4
ASSEMBLY
M10 x 20mm Button
Screw (35)–3
M10 x 73mm Button
Screw (33)–4
M8 Nylon
Locknut (37)–4
M8 Split
Washer (36)–4
M10 Split
Washer (34)–4
M6 x 8mm
Screw (51)–2
M4 x 15mm
Bright Screw
(15)–4
Curved
Washer (66)–2
M8 x 45mm Button
Screw (67)–2
M10 Bright Split
Washer (69)–3
M4 x 15mm
Screw (68)–7
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
aterials. Do not dispose of the packing materials until assembly is completed.
m
Assembly requires the included tools and your own adjustable wrench and Phillips
screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing refers to the key number of the part, from the PART LIST near the end of this manual. The second
number refers to the quantity needed for assembly.
shipping. If a part is not in the parts bag, check to see if it has been preattached.
Note: Some small parts may have been preattached for
5
.
1
To make assembly easier, read the
nformation on page 5 before you begin
i
assembling the exercise cycle.
dentify the Front Stabilizer (2), which has round
I
heels. While another person lifts the front of the
w
Frame (1), attach the Front Stabilizer to the Frame
with two M10 x 73mm Button Screws (33) and two
M10 Split Washers (34).
1
1
2
2. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (14) to the Frame with
two M10 x 73mm Button Screws (33) and two M10
Split Washers (34).
3. While another person holds the Upright (3) near the
Frame (1), connect the Upper Wire Harness (32) to
the Lower Wire Harness (31).
Gently pull the upper end of the Upper W
Harness (32) to remove the slack, and slide the
Upright (3) onto the Frame (1).
ire
34
2
3
3
33
34
14
1
34
Avoid pinching the
Wire Harnesses (31, 32)
during this step
35
69
34
33
Tip: Avoid pinching the Wire Harnesses (31, 32)
during this step. Attach the Upright (3) with three
M10 x 20mm Button Screws (35) and three M10
Bright Split Washers (69).
69
35
1
32
31
6
4. Orient the Handlebar (47) as shown. While a second person holds the Handlebar near the Upright
3), insert the Game Wires (45) into the front of the
(
Upright and pull them upward out of the top of the
pright. T
U
tape to prevent the Game Wires and the Upper
Wire Harness (32) from falling down into the
Upright.
Attach the Handlebar (47) to the Upright (3) with
two M8 x 45mm Button Screws (67) and two
Curved Washers (66).
ip: Use an elastic band or a piece of
4
2
3
3
5
4
47
66
5. Attach the Left and Right Handlebar Covers (64, 65)
and the Rear Handlebar Cover (46) around the
Upright (3) and the Handlebar (47) with five
M4 x 15mm Screws (68).
5
68
64
66
46
3
68
67
65
68
47
6. The Console (6) can be operated with four “D” batteries; alkaline batteries are recommended. Press
the tab on the battery cover and remove the battery
cover. Insert four batteries into the console;
sure that the batteries are oriented as shown by
the diagram inside the battery compartment.
Then, reattach the battery cover.
The Console (6) can also be operated with an
Note:
optional power supply instead of batteries. To pur-
chase a power supply, call the telephone number on the front cover of this manual. Plug one
end of the power supply into the jack on the console. Plug the other end of the power supply into an
appropriate outlet that is properly installed in accordance with all local codes and ordinances.
make
6
Batteries
Batteries
Battery
Cover
6
7
7. While another person holds the Console (6) near
the Upright (3), connect the console wire harness to
the Upper Wire Harness (32). Next, connect the
console game wire marked with a tag to the Game
ire (45) marked with a tag. Then, connect the
W
other console game wire to the other Game Wire.
Tip: Avoid pinching the wires during this step.
Insert the excess wires downward into the Upright
(3). Attach the Console (6) to the Upright with four
M4 x 15mm Bright Screws (15).
7
Console Wire
arness
H
2
3
3
15
45
Game Wires
Console
6
8. Attach the Water Bottle Holder (29) to the Upright
(3) with two M4 x 15mm Screws (68).
9. Orient the Seat Post (5) as shown. Loosen the
Adjustment Knob (1
Adjustment Knob outward, and insert the Seat Post
into the Frame (1). Move the Seat Post upward or
downward to the desired position, and then release
the Adjustment Knob into one of the adjustment
holes in the Seat Post. Then, tighten the Adjustment
Knob a few turns.
Knob is engaged in an adjustment hole.
1) a few turns, pull the
Make sure that the Adjustment
15
8
68
29
3
9
Avoid pinching the
wires during this step
51
5
Attach an M6 x 8mm Screw (51) to the front of the
Seat Post (5).
1
11
8
Loading...