ProForm PFBE1816.0 User Manual

Model No. PFBE1816.0

Visit our website at

www.proform.com

new products, prizes,

fitness tips, and much more!

Serial No.

Write the serial number in the space above for future reference.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if a part is damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.

USER’S MANUAL

CALL TOLL-FREE:

1-888-533-1333

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB: www.proformservice.com

CAUTION

Read all precautions and instruc tions in this manual before using this equipment. Save this manual for future reference.

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

PROFORM is a registered trademark of ICON IP

, Inc.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions

efore using the weight bench.

. Read all instructions in this manual

warnings on the weight bench

he weight bench. Use the weight bench only

as described in this manual.

2. It is the responsibility of the owner to ensure that all users of the weight bench are adequately informed of all precautions.

3. The weight bench is intended for home use only. Do not use the weight bench in any commercial, rental, or institutional setting.

Keep the weight moisture and dust. Place the weight a level surface, with a mat beneath it to protect the floor or carpet. Make sure that there is enough clearance around the weight mount, dismount, and use the weight

5. Keep children under 12 and pets away from the weight bench at all times.

Inspect and properly tighten all parts regularly. Replace any worn parts immediately.

bench

indoors, away from

and all

before using

bench

to .

The weight bench is designed to support a

maximum user weight of 300 pounds and a maximum total weight of 610 pounds. Do not use the weight bench with more than 210 pounds of weight. Do not place more than 130 pounds on the leg lever. Note: The weight bench does not include weights.

10.

If you feel pain or dizziness at any time while exercising, stop immediately and begin cooling down.

The decals shown below have been placed

11.

on the weight bench. If a decal is missing or illegible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.

Always make sure that the backrest knob is fully engaged before using the backrest.

Wear appropriate clothes when exercising.

Always wear athletic shoes for foot protection while exercising.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

hank you for selecting the versatile PROFORM

T FUSION 2.0 X weight bench. The weight bench offers a selection of exercise stations designed to develop the major muscle group of the upper body. Whether your goal is to tone your body, build dramatic muscle

ize and strength, or improve your cardiovascular sys-

s tem, the weight bench will help you to achieve the specific results you want.

For your benefit, read this manual carefully before using the weight bench. If you have questions after

reading this manual, please see the front cover of this

Weight Rest

Safety Spotter

anual. To help us assist you, please note the product

m model number and serial number before contacting us. The model number is PFBE1816.0. The serial number can be found on a decal attached to the weight bench (see the front cover of this manual).

To avoid a registration fee for any service needed under warranty, you must register the weight bench at www.proformservice.com/registration.

Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled.

ASSEMBLED DIMENSIONS: Height: 61 in. / 155 cm Width: 52 in. / 132 cm Depth: 87 in. / 221 cm

Upright Pin

Upright

Curl Pad

Leg Developer

Curl Bar

Backrest

Frame

Seat

M6 Washer (21)

M10 Nylon

Locknut (49)

M10 x 75mm Button Screw (55)

M10 x 16mm

Bolt (51)

M10 x 85mm Button Screw (57)

M10 Washer (52)

M4 x 16mm

Screw (47)

M6 x 25mm

Screw (50)

M6 x 75mm Screw (48)

M10 x 55mm Button Bolt (53)

M10 x 98mm Button Bolt (56)

M10 x 70mm Bolt Set (54)

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST on page 18. Note: Some small parts may have been pre-

assembled. If a part is not in the parts bag, check to see if it has been preassembled.

ASSEMBLY

Make Assembly Easier

ighten all parts as you assemble them, unless

• T instructed to do otherwise.

Everything in this manual is designed to ensure that the weight bench can be assembled successfully by almost anyone. However, the weight bench has many parts and the assembly process will take time. By setting aside plenty of time, assembly will go smoothly.

To hire an authorized service technician to assemble the weight bench, call toll-free 1-800-445-2480.

Before beginning assembly, carefully read the following information and instructions:

Because of its weight and size, the weight bench

•

should be assembled in the location where it will be used. Make sure that there is enough clearance to walk around the weight bench as you assemble it.

• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

• As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.

• Assembly requires two persons.

• For help identifying small parts, use the PART IDENTIFICATION CHART.

In addition to the included grease, assembly may require the following tools (not included):

Two adjustable wrenches

•

One rubber mallet

•

• One standard screwdriver

• One Phillips screwdriver

Assembly may be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

Before beginning assembly, make sure that you have read and understand the information in the box above. See the PART IDENTIFICATION CHART on page 5 for help identifying small parts.

Attach the Left and Right Bases (1, 2) with an M10 x 16mm Bolt (51) and an M10 Nylon Locknut (49). Do not tighten the Nylon

Locknut yet.

Next, attach the Center Base (3) to the Left and Right Bases with eight M10 x 55mm Button Bolts (53), eight M10 Washers (52), and eight M10 Nylon Locknuts (49). Do not tighten the

Nylon Locknuts yet.

+ 14 hidden pages