ProForm C700, PFBE12530 User Manual

Serial Number Decal (Under Seat)
CAUTION
Read all precautions and instruc­tions in this manual before using this equipment. Save this manual for future reference.
Model No. PFBE12530 Serial No.
Write the serial number in the space above for future reference.
QUESTIONS?
As a manufacturer, we are com­mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, we will guarantee complete satis­faction through direct assis­tance from our factory.
TO AVOID DELAYS, PLEASE CALL DIRECT TO OUR TOLL­FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
USER’S MANUAL
Patent Pending
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
2
WARNING DECAL PLACEMENT
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
TABLE OF CONTENTS
The decal shown here has been placed on the weight bench. If the decal is missing or illegible, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time, to order a free replacement decal. Apply the decal in the location shown.
1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual.
2. It is the responsibility of the owner to ensure that all users of the weight bench are ade­quately informed of all precautions.
3. The weight bench is intended for home use only. Do not use the weight bench in any commercial, rental, or institutional setting.
4. Use the weight bench only on a level surface. Cover the floor beneath the weight bench to protect the floor.
5. Always wear athletic shoes for foot protec­tion while exercising.
6. Make sure that all parts are properly tight­ened each time the weight bench is used. Replace any worn parts immediately.
7. Keep children under 12 and pets away from the weight bench at all times.
8. Keep hands and feet away from moving parts.
9. The weight bench is designed to support a maximum user weight of 300 pounds, and a maximum total weight of 410 pounds.
10. If you feel pain or dizziness at any time while exercising, stop immediately and begin cool­ing down.
WARNING:Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the weight bench.
IMPORTANT PRECAUTIONS
3
4
BEFORE YOU BEGIN
Thank you for selecting the PROFORM®C700 weight storage bench. The weight bench is designed to help you develop the major muscle groups of the upper body and offers a storage location for your dumbbell set. Whether your goal is to tone your body, build dra­matic muscle size and strength, or improve your cardio­vascular system, the weight bench will help you to achieve the specific results you want.
For your benefit, read this manual carefully before using the weight bench. If you have additional ques-
tions, please call our Customer Service Department
toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is PFBE12530. The serial number can be found on a decal attached to the weight bench (see the front cover of this manual).
Before reading further, please review the drawing below and familiarize yourself with the parts that are labeled.
ASSEMBLED DIMENSIONS: Height: 17 in. Width: 53 in. Depth: 19 in.
Seat
Dumbbells
Handle
Wheel
Weight Tray
5
Before beginning assembly, carefully read the following information and instructions:
Assembly requires two persons.
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Tighten all parts as you assemble them, unless instructed to do otherwise.
As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
The Allen wrench and the following tools (not included) are required for assembly:
•Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Lubricant, such as grease or petroleum jelly, and soapy water.
Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the weight bench can be assembled suc­cessfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
ASSEMBLY
1.
Press two 64mm Round Outer Caps (8) onto the Right Stabilizer (3).
Lubricate an M10 x 45mm Bolt (17) with grease. Attach a Wheel (9) to the Right Stabilizer (3) with the Bolt and an M10 Nylon Locknut (18). Do not
overtighten the Locknut; the Wheel must be able to roll freely. Attach the other Wheel to the Stabilizer in the same manner.
2. Attach the Right Stabilizer (3) to the Bench Frame (1) with two M10 x 15mm Button Bolts (14) and two M10 Washers (20).
1
2
8
18
3
8
3
1
14
20
20
17
Lubricate
Lubricate
17
9
9
Before beginning assembly, make sure that you understand the information in the box above.
6
5. Attach the Seat (7) to the Seat Brackets (5, 6) with eight M6 x 25mm Screws (15) and eight M6 Washers (19).
6. Make sure that that all parts are properly tight- ened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENTS, beginning on the following page.
5
7
6
19
19
15
15
3. Press two 64mm Round Outer Caps (8) onto the Left Stabilizer (2).
Attach the Left Stabilizer (2) to the Bench Frame (1) with two M10 x 15mm Button Bolts (14) and two M10 Washers (20).
4. Lubricate the hinges on the Left Seat Bracket (5) and the Right Seat Bracket (6) with grease.
Orient the Weight Tray (4) with the slots on the side shown. Attach the Weight Tray to the Bench Frame (1) with four M10 x 28mm Button Bolts (16), the two Seat Brackets (5, 6), and four M10 Nylon Locknuts (18). Note: The Seat Brackets
have stickers on them for part identification.
3
2
8
8
20
14
1
4
5
18
18
18
4
5
16
Slot
Lubricate
Lubricate
Slot
6
18
1
16
19
19
15
7
The steps below explain how the weight bench can be adjusted. See EXERCISE GUIDELINES on page 8 for important exercise information and refer to the accompanying exercise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate­ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
STORING THE DUMBBELLS
To store a dumbbell, lift the Seat (7) and set the dumbbell in the Weight Tray (4).
MOVING THE WEIGHT BENCH
To move the weight bench, lift the handle so that the bench pivots onto the Wheels (9). Roll the bench to the new location and set the bench down.
4
Dumbbell
Handle
9
7
ADJUSTMENTS
8
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
MUSCLE BUILDING
To increase the size and strength of your muscles, push them close to their maximum capacity. Your mus­cles will continually adapt and grow as you progres­sively increase the intensity of your exercise. You can adjust the intensity level of an individual exercise in two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an exercise, such as one sit-up. A“set” is a series of repetitions.)
The proper amount of resistance for each exercise depends upon the individual user. You must gauge your limits and select the amount of resistance that is right for you. Begin with 3 sets of 8 repetitions for each exercise you perform. Rest for 3 minutes after each set. When you can complete 3 sets of 12 repetitions without difficulty, increase the amount of resistance.
TONING
You can tone your muscles by pushing them to a mod­erate percentage of their capacity. Select a moderate amount of resistance and increase the number of rep­etitions in each set. Complete as many sets of 15 to 20 repetitions as possible without discomfort. Rest for 1 minute after each set. Work your muscles by com­pleting more sets rather than by using high amounts of resistance.
WEIGHT LOSS
To lose weight, use a low amount of resistance and increase the number of repetitions in each set. Exercise for 20 to 30 minutes, resting for a maximum of 30 seconds between sets.
CROSS TRAINING
Cross training is an efficient way to get a complete and well-balanced fitness program. An example of a bal­anced program is:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an elliptical or exercise bike, on Tuesday and Thursday.
• Rest from both strength training and aerobic exercise
for at least one full day each week to give your body time to regenerate.
The combination of strength training and aerobic exer­cise will reshape and strengthen your body, plus devel­op your heart and lungs.
PERSONALIZING YOUR EXERCISE PROGRAM
Determining the exact length of time for each workout, as well as the number of repetitions or sets completed, is an individual matter. It is important to avoid overdo­ing it during the first few months of your exercise pro­gram. You should progress at your own pace and be sensitive to your body’s signals. If you experience pain or dizziness at any time while exercising, stop immedi­ately and begin cooling down. Find out what is wrong before continuing. Remember that adequate rest and a proper diet are important factors in any exercise pro­gram.
WARMING UP
Begin each workout with 5 to 10 minutes of stretching and light exercise to warm up. Warming up prepares your body for more strenuous exercise by increasing circulation, raising your body temperature and deliver­ing more oxygen to your muscles.
WORKING OUT
Each workout should include 6 to 10 different exercis­es. Select exercises for every major muscle group, emphasizing areas that you want to develop most. To give balance and variety to your workouts, vary the exercises from session to session.
Schedule your workouts for the time of day when your energy level is the highest. Each workout should be followed by at least one day of rest. Once you find the schedule that is right for you, stick with it.
EXERCISE FORM
Maintaining proper form is an essential part of an effective exercise program. This requires moving through the full range of motion for each exercise, and moving only the appropriate parts of the body. Exercising in an uncontrolled manner will leave you feeling exhausted. On the exercise guide accompany­ing this manual you will find photographs showing the correct form for several exercises, and a list of the muscles affected. Refer to the muscle chart on the next page to find the names of the muscles.
The repetitions in each set should be performed smoothly and without pausing. The exertion stage of each repetition should last about half as long as the return stage. Proper breathing is important. Exhale during the exertion stage of each repetition and inhale during the return stroke. Never hold your breath.
9
Rest for a short period of time after each set. The ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
• Rest for one minute after each set for a toning work-
out.
• Rest for 30 seconds after each set for a weight loss
workout. Plan to spend the first couple of weeks familiarizing yourself with the equipment and learning the proper form for each exercise.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching. Include stretches for both your arms and legs. Move
slowly as you stretch and do not bounce. Ease into each stretch gradually and go only as far as you can without strain. Stretching at the end of each workout is an effective way to increase flexibility.
STAYING MOTIVATED
For motivation, keep a record of each workout. List the date, the exercises performed, the resistance used, and the numbers of sets and repetitions completed. Record your weight and key body measurements at the end of every month. Remember, the key to achiev­ing the greatest results is to make exercise a regular and enjoyable part of your everyday life.
A
B
C D
E
F
G
H
I
J
K
L
M N
MUSCLE CHART
O P
Q
R S
T
U
V W
X
A. Sternomastoid (neck) B. Pectoralis Major (chest) C. Biceps (front of arm) D. Obliques (waist) E. Brachioradials (forearm) F. Hip Flexors (upper thigh) G. Abductor (outer thigh) H. Quadriceps (front of thigh) I. Sartorius (front of thigh) J. Tibialis Anterior (front of calf) K. Soleus (front of calf) L. Anterior Deltoid (shoulder) M. Rectus Abdominus (stomach) N. Adductor (inner thigh) O. Trapezius (upper back) P. Rhomboideus (upper back) Q. Posterior Deltoid (shoulder) R. Triceps (back of arm) S. Latissimus Dorsi (mid back) T. Spinae Erectors (lower back) U. Gluteus Medius (hip) V. Gluteus Maximus (buttocks) W. Hamstring (back of leg) X. Gastrocnemius (back of calf)
10
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts.
Key No. Qty. Description Key No. Qty. Description
11Bench Frame 21Left Stabilizer 31Right Stabilizer 41Weight Tray 51Left Seat Bracket 61Right Seat Bracket 71Seat 8464mm Round Outer Cap
92Wheel 10 2 3-pound Dumbbell 11 2 5-pound Dumbbell 12 2 8-pound Dumbbell
13 2 10-pound Dumbbell 14 4 M10 x 15mm Button Bolt 15 8 M6 x 25mm Screw 16 4 M10 x 28mm Button Bolt 17 2 M10 x 45mm Bolt 18 6 M10 Nylon Locknut 19 8 M6 Washer 20 4 M10 Washer
#1User’s Manual #1Exercise Guide #1Allen Wrench #1Grease Pack
PART LIST—Model No. PFBE12530 R0903A
EXPLODED DRAWING—Model No. PFBE12530 R0903A
11
7
19
15
18
16
5
18
1
11
18
15
14
12
6
8
20
13
17
9
9
18
17
3
8
19
16
4
18
8
20
14
2
8
10
Part No. 203286 R0903A Printed in China © 2003 ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate­rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center; products used for commercial or rental pur­poses; or products used as store display models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse­quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer­chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre­pared to give the following information:
1. The MODEL NUMBER of the product (PFBE12530)
2. The NAME of the product (PROFORM
®
C700 weight storage bench)
3. The SERIAL NUMBER of the product (see the front cover of this manual)
4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING at the center of this manual)
ORDERING REPLACEMENT PARTS
Loading...