Page 1
USER'S MANUAL
Part No. 147105 R0199A Printed in Canada © 1999 ICON Health & Fitness, Inc.
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Fitness Lifestyle Ltd. office, or write:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
Tel: Country Code: 0345-089009
Fax: 0113-2411120
• The MODEL NUMBER OF THE PRODUCT (PETL50071)
• The NAME OF THE PRODUCT (PROFORM
®
CROSSTRAINER treadmill)
• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
• The KEY NUMBER OF THE PART(S) (see the PART LIST on page 19 and the EXPLODED DRAWING
attached in the centre of this manual)
• The DESCRIPTION OF THE PART(S) (see the PART LIST on page 19 and the EXPLODED DRAWING
attached in the centre of this manual).
If possible, place the treadmill near your telephone for easy reference when calling.
Model No. PETL50071
Serial No.
QUESTIONS?
As a manufacturer, we are
committed to providing
complete customer satisfaction.
If you have questions, or if
there are missing parts, we will
guarantee complete satisfaction
through our Customer Service
Department.
Please CALL:
0345-089009
Or WRITE:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual for future reference.
Class H C Fitness Product
Serial Number
Decal
Page 2
2
19
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
HOW TO EXERCISE ON THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
HOW TO OPERATE THE WEIGHT BENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
HOW TO EXERCISE ON THE WEIGHT BENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
HOW TO MOVE THE CROSSTRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING is attached in the centre of this manual. Save the EXPLODED DRAWING for
future reference.
PART LIST—Model No. PETL50071 R0199A
Key No. Qty. Description
1 1 Backrest
2 6 Backrest Screw
3 6 Nut
4 4 Backrest Support Bolt
5 1 Left Backrest Frame
6 1 Right Backrest Frame
7 2 Bench Frame Spacer
8 1 Bench Bracket
9 2 Bench Bracket Bolt
10 1 Bench Pivot Bolt
11 2 Bench Support Pivot
Bolt
12 1 Backrest Support
13 1 Bench Adjustment
14 1 Bench Seat
15 1 Bench Pin
16 1 Bench Back
17 10 Plastic Fastener
18 2 Bench Leg Cap
19 1 Bench Leg
20 1 Bench Leg Pivot Bolt
21 1 Bench Poster
22* 1 Latch Assembly
23 1 Bench Bottom
24 2 Rear Roller Adj. Bolt
25 5 Adjustment Washer
26 2 Rear Roller Endcap
Screw
27 2 Endcap Screw
28 2 Rear Roller Endcap
29 1 Latch Warning Decal
30 1 Belly Pan
31 1 Frame
32 1 Solid Isolator
33 2 Rear Isolator Screw
34 4 Hood Anchor
35 4 Isolator
36 1 Rear Roller
37 1 Left Foot Rail
38 1 Right Foot Rail
39 1 Walking Belt
40 1 Motor Pivot Nut
41 6 Walking Platform
Screw
42 1 Walking Platform
43 2 Upright Spacer
44 1 Magnet
45 1 Reed Switch/Sensor
Wire
46 1 Reed Switch Clip
47 1 Ground Wire
48 2 Upright Pivot Washer
49 1 Front Roller/Pulley
50 2 Cage Nut
51 1 Front Roller Adj. Bolt
52 2 Belt Guide
53 50 Screw
54 4 Incline Bracket Bolt
Key No. Qty. Description
55 1 Incline Bracket
56 1 Incline Motor
57 14 Incline Nut
58 1 Bench Lock Pin
59 2 Bench Latch Bolt
60 2 Bench Latch Washer
61 2 Latch Frame Spacer
62 1 Latch Slide
63 1 Latch Bracket
64 2 Latch Bolt
65 1 Latch Bracket
66 2 Incline Leg Bolt
67 2 Wheel Bolt
68 2 Wheel
69 1 Motor
70 1 Flywheel
71 1 Incline Leg
72 1 Circuit Breaker
73 4 Tie Clamp
74 2 Spring Screw
75 2 Releasable Tie
76 4 7 1/2” Cable Tie
77 12 Weight Rack Screw
78 2 Lock Knob
79 2 2-lb. Weight
80 2 4-lb. Weight
81 2 6-lb. Weight
82 1 Left Weight Rack
83 1 Lock Knob Spring
84 1 Lock Pin Collar
85 1 Incline Motor Spacer
86 1 Latch Clip
87 1 Treadmill Lock Pin
88 2 Handrail Cap
89 1 Motor Belt
90 4 Console Base Screw
91 2 Frame Guide
92 1 Console Base
93 1 Speed Control Knob
94 1 Speed Potentiometer
95 1 Battery Cover
96* 1 Console
97 3 Nylon Washer
98 1 Key/Clip
99 1 Right Weight Rack
100* 1 Motor Assembly
101 1 Motor Pivot Bolt
102 1 Upright Base
103 1 Shock
104 1 Frame Guide Spacer
105 1 Motor TensionWasher
106 1 Tension Star Washer
107 1 Motor TensionNut
108 1 Wire Harness
109 2 Front Wheel Bolt
110 2 Front Wheel
111 2 Front Wheel Nut
112 1 Choke
Key No. Qty. Description
113 1 Receptacal
114 1 Filter
115 2 Extension Leg Screw
116 1 Allen Wrench
117 4 Base Pad
118 2 Upright Pivot Bolt
119 2 Upright Pivot Washer
120 1 Belly Pan
121 2 Bench Lock Bolt
122 2 Ground Nut
123 1 Controller
124 1 Hood Cover
125 1 Hood
126 2 Backrest Spacer
127 2 Bench Pin Cap
128 6 Front Belly Pan Screw
129 1 Adhesive Clip
130 1 Incline Switch
131 1 8” Green Ground Wire
132 1 Console Plug
133 3 Nylon Washer
134 1 Incline Wire Harness
135 1 Left Handrail
136 1 Right Handrail
137 2 Handrail Extension
138 2 Handrail Washer
139 2 Ground Washer
140 2 Ground Screw
141 4 Handrail Bolt
142 2 Motor Bushing
143 1 Motor Sleeve
144 4 Cage Nut
145 2 Long Hood Screw
146 2 Upright Cap
147 1 Warning Decal/Weights
148 1 Warning Decal/Knob
# 1 10” White, 2 Female/
1 Male
# 1 4” White, 2 Female
# 1 4” Black, 2 Female
# 1 8” Blue Male/Female
# 1 4” Green/Yellow
# 1 User’s Manual
* Includes all parts shown in the box
# These parts are not illustrated
Page 3
18
3
1. It is the responsibility of the owner to
ensure that all users of the CROSSTRAINER
are adequately informed of all warnings and
precautions.
2. Use the CROSSTRAINER only as described
in this manual.
3. Place the CROSSTRAINER on a level
surface, with eight feet of clearance behind
it. Do not place the CROSSTRAINER on a
surface that blocks any air openings. To protect the floor or carpet from damage, place a
mat under the CROSSTRAINER.
4. Keep the CROSSTRAINER indoors, away
from moisture and dust. Do not put the
CROSSTRAINER in a garage or covered
patio, or near water.
5. Do not operate the CROSSTRAINER where
aerosol products are used or where oxygen
is being administered.
6. Keep children under 12 and pets away from
the CROSSTRAINER at all times.
7. The CROSSTRAINER should be used only by
persons weighing 250 pounds (115 kg) or
less.
8. The CROSSTRAINER should never be used
by more than one person at a time.
9. Wear appropriate exercise clothing when
using the CROSSTRAINER. Do not wear
loose clothing that could become caught in
the treadmill. Athletic support clothes are
recommended for both men and women.
10. Always wear athletic shoes when using the
CROSSTRAINER. Never use the CROSSTRAINER with bare feet, wearing only
stockings, or in sandals.
11. Inspect and tighten all parts of the CROSSTRAINER regularly.
12. When connecting the power cord (see HOW
TO PLUG IN THE POWER CORD on page 8),
plug the power cord into an earthed circuit.
When replacing the fuse, on ASTA approved
BS1362 type should be fitted to the fuse carrier. A 13 amp fuse should be used. No other
appliance should be on the same circuit.
13. If you need an extension cord, use only a 14gauge cord of 5 feet (1,5 m) or less in length.
14. Keep the power cord away from heated
surfaces.
15. Never move the walking belt whilst the
power is turned off. Do not operate the
CROSSTRAINER if the power cord or plug is
damaged, or if the CROSSTRAINER is not
working properly. (See BEFORE YOU BEGIN
on page 5 if the CROSSTRAINER is not
working properly.)
16. Never start the treadmill whilst you are
standing on the walking belt. Always hold
the handrails whilst using the treadmill.
17. The CROSSTRAINER is capable of high
speeds. Adjust the speed in small increments to avoid sudden jumps in speed.
18. To reduce the possibility of the treadmill
overheating, do not operate the treadmill
continuously for longer than one hour.
19. Never leave the treadmill unattended whilst it
is running. Always remove the key when the
treadmill is not in use.
20. Do not attempt to raise, lower, or move the
CROSSTRAINER until it is properly assembled.
21. You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the
CROSSTRAINER.
WARNING:To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the PROFORM®CROSSTRAINER.
IMPORTANT PRECAUTIONS
HOW TO MOVE THE CROSSTRAINER
Before moving the CROSSTRAINER, make sure that the bench and treadmill are folded to the storage
position, and that the lock pins are fully engaged (see HOW TO FOLD THE TREADMILL TO THE STORAGE POSITION on page 11, and HOW TO FOLD THE BENCH TO THE STORAGE POSITION on page 14).
To move the CROSSTRAINER, first hold the handrails
and place one foot on the base as shown.
Next, tilt the CROSSTRAINER back until it rolls freely on
the front wheels. Carefully move the CROSSTRAINER to
the desired location. Place one foot on the base, and
carefully lower the CROSSTRAINER until it is resting on
the base. Never move the CROSSTRAINER without
tipping it back, or the base pads may come off. To reduce the risk of injury, use extreme caution whilst
moving the CROSSTRAINER. Do not move the
CROSSTRAINER over an uneven surface.
Base
Front Wheels
c. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly
tightened, you should be able to lift each side of the walking belt 7 to 10 cm off the walking platform. The centre of
the walking belt should just touch the walking platform.
Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be
permanently damaged. Remove the key and UN-
PLUG THE POWER CORD. Using the allen wrench,
turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly
tightened, you should be able to lift each side of the
walking belt 7 to 10 cm off the walking platform. The
centre of the walking belt should just touch the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run
the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
c. If the walking belt still slows when walked on, please call our toll-free Customer Service Department.
Rear Roller Adjustment Bolts
7–10 cm
b
c
Page 4
174
22. The CROSSTRAINER includes three pairs of
hand weights. Do not use any other weights
with the CROSSTRAINER.
23. Before moving the CROSSTRAINER, make
sure that the bench and treadmill are folded
to the storage position, and that the lock
pins are fully engaged (see HOW TO FOLD
THE TREADMILL TO THE STORAGE POSITION on page 11, and HOW TO FOLD THE
BENCH TO THE STORAGE POSITION on
page 14).
24. Never insert any object into any opening.
25. Always unplug the power cord before performing the maintenance and adjustment
procedures described in this manual. Never
remove the motor hood unless instructed to
do so by an authorised service representative. Servicing other than the procedures in
this manual should be performed only by an
authorised service representative.
26. The CROSSTRAINER is intended for in-home
use only. Do not use the CROSSTRAINER in
any commercial, rental, or institutional
setting.
WARNING:Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown at the right have
been placed on the CROSSTRAINER.
If a decal is missing, or if it is not
legible, please call our Customer
Service Department, toll-free, to
order a free replacement decal (see
ORDERING REPLACEMENT PARTS
on the back cover of this manual).
Apply the decal in the locations
shown.
PROBLEM: The walking belt is off-centre or slips when walked on
SOLUTION: a. If the walking belt has shifted to the left, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn
each. Be careful not to overtighten the walking belt. Plug
in the power cord, insert the key and run the treadmill for
a few minutes. Repeat until the walking belt is centred.
b. If the walking belt has shifted to the right, first remove
the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn the left rear roller adjustment bolt
counterclockwise, and the right bolt clockwise, 1/4 of a
turn each. Be careful not to overtighten the walking belt.
Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is
centred.
b
a
b. After the power cord has been plugged in, make sure that the key is fully inserted into the con-
sole. See step 1 on page 10.
c. Check the circuit breaker located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the circuit breaker has tripped. To reset
the circuit breaker, wait for five minutes and then
press the switch back in.
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing
above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 10.
d. If the treadmill still will not run, please call our Customer Service Department, toll-free.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Check the batteries in the console. See BATTERY INSTALLATION on page 9. Most problems are
the result of drained batteries.
b. Remove the six screws from the hood. Carefully remove
the hood. Locate the Reed Switch (45) and the Magnet
(44) on the left side of the Pulley (49). Turn the Pulley until
the Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed Switch
is about 3mm. If necessary, loosen the Screw (53) and
move the Reed Switch slightly. Retighten the Screw. Re-
attach the hood, and run the treadmill for a few minutes to
check for a correct speed reading.
44
45
53
Top
View
3mm
49
Tripped
Reset
Tripped
Reset
c
Page 5
16
5
Congratulations for purchasing the revolutionary
CROSSTRAINER from PROFORM®. The unique
CROSSTRAINER offers both aerobic exercise and
strength training exercise to help you achieve total
fitness in the convenience of your home. And when
you’re not exercising, the CROSSTRAINER can be
folded up, taking a fraction of the space needed for
both a treadmill and a bench.
For your benefit, read this manual before using the
CROSSTRAINER. If you have additional questions,
please call our Customer Service Department at 0345-
089009. To help us assist you, please note the product
model number and serial number before calling. The
model number of the treadmill is PETL50071. The serial number can be found on a decal attached to the
CROSSTRAINER (see the front cover of this manual
for the location).
Before reading further, please review the drawing
below and familiarise yourself with the parts that are
labelled.
BEFORE YOU BEGIN
Handrail
Lock
Pin
Key/
Clip
Weight
Rack
Hand
Weight
Backrest
Seat
Support
Bench Knob
Circuit
Breaker
Walking Belt
Cushioned Walking Platform
Foot Rail
Rear Roller
Adjustment Bolts
Water Bottle Holder
(water bottle is
not included)
Towel
Rack
Accessory Tray
Incline Leg
MAINTENANCE AND TROUBLE-SHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet. (See HOW TO PLUG IN
THE POWER CORD on page 8.) If an extension cord is needed, use only a 14-gauge cord of five
feet (1,5 m) or less in length.
WEIGHT BENCH EXERCISES
The exercise chart on the CROSSTRAINER shows
twenty exercises that can be performed on the weight
bench. Read the exercise guidelines on this page
before beginning any exercises.
1. Flat Bench Press—Press the weights up in a
straight line from your chest.
2. Flat Bench Flyes—With the bench in a flat position, bend your elbows slightly and bring the
weights together above your chest.
3. Incline Flyes—With the bench in an inclined position, bend your elbows slightly and bring the
weights together above your chest.
4. One Arm Row—Lift a weight up and back, bending your elbow as shown. Repeat this exercise
with your other arm.
5. Bent Over Lat Raise—Lift the weights to the side,
bringing your shoulder blades towards each other.
6. Seated Overhead Raise—Press the weights up
in a straight line until they are overhead.
7. Lateral Raise—Raise the weights to the side until
they are even with your shoulders.
8. Front Raise—Raise the weights to the front until
your arms are in a horizontal position.
9. Upright Row—Keeping your hands close together and your elbows outward, bring the weights
up to your chin.
10. Seated Curl—Keeping your upper arms stationary, bring the weights up to shoulder level.
11. Incline Curl—With the bench in an inclined position, bring the weights up to shoulder level. Be
sure to keep your upper arms stationary.
12. Concentration Curl—Keeping one elbow
pressed against your inner thigh, lift a weight by
bending your elbow. Repeat this exercise with the
other arm.
13. Seated Overhead Press—Whilst seated on the
bench, press a weight up in a straight line by
bending your elbow. Repeat this exercise with
your other arm.
14. Lying Overhead Press—Whilst lying on the
bench, press a weight up in a straight line by
bending your elbow. Repeat this exercise with
your other arm.
15. Kickback—Keeping your upper arm stationary,
bring a weight up and back as shown. Repeat this
exercise with the other arm.
16. Flat Bench Crunch—Lie on the bench. Using
your abdominal muscles, raise your upper body a
few inches. Be sure to keep your back straight.
17. Vertical Sit-ups—Hold the bench as shown and
pull both knees toward your chest.
18. Crunch with Weights—Lie on the bench and
hold one or two weights against your chest. Using
your abdominal muscles, raise your upper body a
few inches. Be sure to keep your back straight.
19. Shrug—Keeping your arms against your sides,
raise your shoulders.
20. Forearm Curl—Rest your forearm on the bench
as shown. Using your wrist, curl a weight upward.
Repeat this exercise with your other arm.
Page 6
156
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench,
your own phillips screwdriver and two adjustable spanners .
The CROSSTRAINER offers a variety of exercises
designed to trim, tone, and strengthen the body.
Please read these guidelines before using the
weight bench. WARNING: Before beginning any
exercise program, consult your physician. This is
especially important for persons over the age of 35
or persons with pre-existing health problems.
STRENGTH TRAINING GUIDELINES
Your strength training program should include three
workouts each week. To give your body time to rest,
workouts should be on alternating days, such as
Monday, Wednesday, and Friday. Instead of waiting
for a convenient time to exercise, plan a specific time.
The morning hours work well for many, and the selfdiscipline required to rise early and exercise may result
in greater productivity throughout the day. For others,
exercising before dinner offers a chance to wind down
from the day’s activities. Whatever time you choose,
be consistent and stick with it.
Each workout should include three important parts:
(1) a warm-up, (2) 6 to 10 exercises, and (3) a cooldown.
Warming Up
Begin each workout with 5 to 8 minutes of stretching
(see SUGGESTED STRETCHES on page 13).
Stretching prepares the body for exercise by increasing circulation, delivering more oxygen to the muscles,
and raising the body temperature.
Exercises
Next, perform 6 to 10 of the exercises shown on the
exercise chart on the CROSSTRAINER. To give bal-
ance and variety to your workouts, vary the exercises
from workout to workout.
Begin with 1 set of 12 repetitions for each exercise that
you do. (A “repetition” is one cycle of an exercise, such
as one sit-up. A “set” is a series of repetitions performed without pausing.) As your fitness level increases, perform 2 sets of 12 repetitions for each exercise that you do. When you are ready for an advanced
workout, try 3 sets of 12 repetitions. Always rest for at
least 1 minute after each set. When you can complete
3 sets of 12 repetitions without difficulty, you may
choose to use heavier weights.
CAUTION: The CROSSTRAINER includes three
pairs of hand weights. Do not use any other
weights with the CROSSTRAINER.
Cooling Down
Finish each workout with 5 to 8 minutes of stretching to
cool down. This will increase your flexibility, and will
help to reduce post-exercise soreness.
Be careful to avoid overdoing it during the first few
months of your exercise program—it is important to
progress at your own pace. CAUTION: If you feel
pain or dizziness at any time, stop immediately and
begin cooling down.
EXERCISE FORM
For the best results, correct form is important. The exercise chart on the CROSSTRAINER shows the correct form for twenty different exercises. Try to move
through the full range of motion for each exercise and
move only the appropriate parts of the body.
Perform each exercise with a smooth, steady motion.
Exhale as you exert yourself, and inhale as you return
to the starting position; never hold your breath.
STAYING MOTIVATED
To stay motivated, try listening to music or watching
television whilst you exercise. It may also be helpful to
work out with a partner. Use a calendar to keep a
record of your workouts, and write key body measurements at the end of every month.
Remember, the key to lasting results is to make exercise a regular and enjoyable part of your daily life.
HOW TO EXERCISE ON THE WEIGHT BENCH
3. Insert the brackets on the Console Base (92) into the
Uprights (102). Insert any slack in the Wire Harness
(108) into the right Upright. Attach the Console Base with
the four Handrail Bolts (141) and Handrail Washers
(138). Tighten all four Handrail Bolts.
1. With the help of a second person, carefully lay the
treadmill on its right side as shown (refer to the drawing
on page 4 to identify the right side).
Insert the Extension Legs (137) into the treadmill. Make
sure that the Extension Legs are turned so the Base
Pads (117) are on the indicated side. Attach each
Extension Leg with an Extension Leg Screw (115).
With the help of a second person, carefully raise the
treadmill to the upright position so the Extension Legs
(137) are resting flat on the floor.
2. Refer to HOW TO LOWER THE TREADMILL FOR USE
on page 9. Follow the instructions on page 9 to lower the
treadmill.
Next, remove the nut, bolt, and shipping bracket from the
left Upright (102).
1
2
3
115
Allen Wrench
137
117
102
Bolt
Nut
Shipping
Bracket
141
138
138
92
141
108
102
Page 7
14
7
HOW TO LOWER THE BENCH FOR USE
To use the bench, the treadmill must be folded to the
storage position. See HOW TO FOLD THE TREADMILL TO THE STORAGE POSITION on page 11.
Hold the end of
the bench as
shown—do not
hold the leg.
Using your
right hand,
slide the bench
knob to the
right as far as
possible. Make
sure that the
knob is moved
all of the way
to the “bench”
position. Note:
It may be necessary to push
on the leg
whilst you slide
the knob to the “bench” position. Lower the bench until
the leg is resting on the floor.
HOW TO ADJUST THE BACKREST
The backrest can be used in a level position or in either
of two inclined positions. When the bench is first
lowered, the backrest will be in the level position. To
adjust the backrest to one of the inclined positions, first
raise the backrest and lower the support (see the drawing below). Rest the end of the support against either
of the backrest stops as shown. Make sure that the
support is resting against one of the backrest stops.
To adjust the
backrest to the
level position,
first raise the
backrest
slightly. Pivot
the end of the
support in the
direction
shown by the
arrow. Lower
the backrest
onto the bench
frame.
HOW TO FOLD THE BENCH TO THE STORAGE
POSITION
Raise the
bench to the
vertical position and hold it
in place. Using
your right
hand, slide the
bench knob to
the left as far
as possible.
Make sure
that the knob
is moved all
of the way to
the “treadmill” position.
Refer to the
inset drawing.
Make sure
that the lock
pin is inserted
in the hole into the bench frame.
Bench
Knob
HOW TO OPERATE THE WEIGHT BENCH
Backrest
Backrest Stops
Support
Bench
Knob
Support
Lock Pin
Leg
6. Put a 2-lb. Weight (79) on the upper hooks on the Right
Weight Rack (99). Put a 4-lb. Weight (80) on the centre
hooks on the Right Weight Rack. Put a 6-lb. Weight
(81) on the lower hooks on the Right Weight Rack.
Put the remaining Weights on the Left Weight Rack
(not shown).
7. Remove the backing from the Adhesive Clip (129).
Press the Adhesive Clip onto the base of the Uprights
(102) in the indicated location. Press the Allen Wrench
(116) into the Adhesive Clip.
8. Make sure that all parts of the CROSSTRAINER are
properly tightened. To protect the floor or carpet from
damage, place a mat under the CROSSTRAINER.
6
7
79
80
81
99
116
102
129
5. Slide the Lock Pin Collar (84) and the Spring (83) onto
the Lock Pin (87). Insert the Lock Pin into the left
Upright (102) and the Left Weight Rack (82). Tighten
the Treadmill Knob (78) onto the Lock Pin.
5
87
83
84
82
102
78
4. Locate the Left Weight Rack (82), which can be identified by the hole near the top. Attach the Left Weight
Rack to the left Upright (102) with six Weight Rack
Screws (77).
Attach the Right Weight Rack to the right Upright in the
same manner (not shown).
4
77
82
102
Hole
77
77
Page 8
138
A Cool-down
Finish each workout with 5 to 8 minutes of stretching
to cool down. This will increase the flexibility of your
muscles and will help to prevent post-exercise problems.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired.
The key to success is to make exercise a regular and
enjoyable part of your everyday life.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the
right. Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees, and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back, and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your
back foot flat on the floor. Bend your front leg, lean forward and
move your hips toward the wall. Hold for 15 counts, then relax.
Repeat 3 times for each leg. To cause further stretching of the
achilles tendons, bend your back leg as well. Stretches:
Calves, achilles tendons, and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for both legs. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold
for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
1
2
3
4
5
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETMWALKING BELT
Your treadmill features a walking belt coated with PERFORMANT LUBE
TM
, a high-performance lubricant. IMPOR-
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will
deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or
break down, earthing provides a path of least resistance for
electric current to reduce the risk of electric shock. This product
is equipped with a cord having an equipment-earthing conductor
and a earthing plug. Plug one end of the cord into the treadmill.
Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes
and ordinances.
DANGER:Improper connection of the
equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly earthed. Do
not modify the plug provided with the product—if it
will not fit the outlet, have a proper outlet installed
by a qualified electrician.
FUSED
Page 9
9
12
HOW TO EXERCISE ON THE TREADMILL
The following guidelines will help you to plan your exercise program. Remember—these are general guidelines only.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.
To find the proper heart rate for you, first find your age
on the left side of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers to
the right of your age. The three numbers are your
“training zone.” The lower two numbers are recommended heart rates for fat burning; the higher number
is the recommended heart rate for aerobic exercise.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time. During
the first few minutes of exercise, your body uses easily
accessible carbohydrate calories for energy. Only after
the first few minutes does your body begin to use
stored fat calories for energy. If your goal is to burn fat,
adjust the speed and incline of the treadmill until your
heart rate is near one of the lower two numbers in your
training zone.
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone.
HOW TO MEASURE YOUR HEART RATE
To measure your
heart rate, stop exercising and place
two fingers on
your wrist as
shown. Take a sixsecond heartbeat
count, and multiply
the result by ten to
find your heart rate. (A six-second count is used because your heart rate drops quickly when you stop exercising.) If your heart rate is too high or too low, adjust
the speed or incline of the treadmill accordingly.
WORKOUT GUIDELINES
A well-rounded workout includes the following three
important parts:
A Warm-up
Start each workout with 5 to 8 minutes of stretching
and light exercise (see SUGGESTED STRETCHES on
page 13). A proper warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Training Zone Exercise
After warming up, increase the intensity of your exercise until your heart rate is in your training zone for 20
to 60 minutes. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly
and deeply as you exercise—do not hold your breath.
WARNING:Before beginning
this or any exercise program, consult your
physician. This is especially important for individuals over the age of 35 or individuals
with pre-existing health problems.
HOW TO LOWER THE TREADMILL FOR USE
To use the treadmill, the bench must be folded to the
storage position. See HOW TO FOLD THE BENCH
TO THE STORAGE POSITION on page 14.
Caution: You must be able to safely lift 45 pounds
(20 kg) in order to lower the treadmill.
To lower the
treadmill, hold
the upper end
of the treadmill
with your right
hand as shown.
Hold the treadmill knob with
your left hand
and pull it to
the left. Pivot
the treadmill
down a few
inches.
Next, hold the treadmill with both hands as shown
below and lower the treadmill to the floor. To decrease
the possibility of injury, bend your legs and keep
your back straight.
THE PERFORMANT LUBE
TM
WALKING BELT
The CROSSTRAINER features a walking belt coated
with PERFORMANT LUBETM, a high-performance
lubricant. IMPORTANT: Never apply silicone spray
or other substances to the walking belt or the
walking platform. Such substances will deteriorate
the walking belt and cause excessive wear.
BATTERY INSTALLATION
The console requires three "AA" batteries (not
included) for operation. Alkaline batteries are recommended.
To install
batteries, first
open the battery cover
under the
console as
shown. Next,
press three
batteries into
the battery
compartment.
Make sure that
the negative ends of the batteries (marked “–”) are
touching the springs in the battery compartment.
Close the battery cover.
Note: If there is a thin sheet of clear film on the face of
the console, remove it.
Batteries
Battery Cover
Treadmill
Knob
CAUTION:Before operating the
console, read the following precautions.
• Do not stand on the walking belt when turning on the power.
• Always wear the clip (see the drawing on
page 10) whilst using the CROSSTRAINER.
When the key is removed from the console,
the walking belt will stop.
• The CROSSTRAINER is capable of high
speeds. Adjust the speed in small increments.
• The training zones marked beside the
speed control are general guidelines only.
See page 12 for more information.
• To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console. Use only a sealable water
bottle.
Page 10
Follow your progress with the LED track and the
four monitor displays.
The LED
Track—The LED
track in the centre of the console
represent a distance of 1/4 mile.
As you exercise,
the indicators
around the track will light one at a time until you have
completed 1/4 mile. Another lap will then begin.
The TIME display—
This display shows the
total time that you
have walked or run on
the treadmill.
The DISTANCE display—This display
shows the total distance that you have
walked or run, in kilometres.
The SPEED display—
This display shows the
speed of the walking
belt, in kilometres per
hour.
The CALORIES/
FAT CALORIES
display—This display
shows the approximate
numbers of calories and
fat calories you have
burned. (See FAT
BURNING on page 12.) Every seven seconds, the
display will change from one number to the other.
Arrows in the display will indicate which number is
currently shown.
Note: The displays can be reset by pressing the
On/Reset button.
When you are finished exercising, stop the
walking belt and remove the key.
Step onto the foot rails, stop the walking belt, and
remove the key from the console. Store the key in a
secure place. After the key is removed, the dis-
plays will remain on for about five minutes.
Note: Any time that the walking belt is stopped
and no console buttons are pressed for five
minutes, the displays will automatically turn off.
HOW TO FOLD THE TREADMILL TO THE STORAGE
POSITION
Before folding the treadmill, unplug the power cord.
Caution: You must be able to safely lift 45 pounds
(20 kg) in order to raise the treadmill.
Hold the treadmill in the locations shown below. To decrease the possibility of injury, bend your legs and
keep your back straight. As you raise the treadmill,
make sure to lift with your legs rather than your
back. Raise the treadmill until it is almost vertical.
Next, hold the
upper end of
the treadmill
with your right
hand as shown.
Using your left
hand, pull the
treadmill knob
to the left. Pivot
the treadmill
until the lock
pin is aligned
with the hole in
the side of the
treadmill frame
(refer to the
inset drawing).
Slowly release the knob. Make sure that the lock pin is
inserted into the hole in the treadmill frame.
Note: To protect the floor or carpet from damage,
place a mat under the CROSSTRAINER. Keep the
CROSSTRAINER out of direct sunlight. Do not leave
the CROSSTRAINER in the storage position in temperatures above 85° Fahrenheit.
Lock Pin
Treadmill
Knob
10
11
DIAGRAM OF THE CONSOLE
/
Clip
Key
Speed Control
Incline Control
On/Reset Button
Monitor Displays
LED Track
STEP BY STEP CONSOLE OPERATION
Step onto the foot rails of the treadmill. Find the clip
attached to the key (see the drawing above), and slide
the clip onto the waistband of your clothing. Follow the
steps below and on page 11 to operate the console.
Insert the key fully into the power switch.
When the key is inserted, the first indicator in the LED track
will light. The four displays will not turn on
until the On/Reset button is pressed or the
walking belt is started. Note: If you just installed
batteries, the displays will already be on.
Reset the speed control.
Slide the speed control
down to the RESET
position. Note: Each
time the walking belt is
stopped, the speed
control must be moved
to the RESET position
before the walking belt
can be restarted.
Start the walking belt.
After you have moved the speed control to the
RESET position, slide it slowly upward until the
walking belt begins to move at slow speed.
Carefully begin walking on the walking belt.
Change the speed of the walking belt as desired
by sliding the speed control. To stop the walking
belt, step onto the foot rails and slide the speed
control to the RESET position.
Change the incline of the treadmill, if desired.
To increase or decrease
the incline of the treadmill, hold down the top
or bottom of the incline
control. Important: Do
not change the incline
of the treadmill by
placing objects under
the treadmill. Change
the incline only with the
incline control.
Important: Before folding the treadmill, adjust
the incline to the lowest position.
1
Note: If there is a thin sheet of clear
plastic on the console, remove it.
2
Arrow
6
3
4
5
Incline
Control
Page 11
141
90
90
145
145
141
77
77
77
78
88
102
83
84
86
87
89
99
77
77
77
40
88
100*
101
54
105
106
107
103
111
110
113
72
109
53
117
137
117
118
119
128
120
128
53
123
53
53
53
125
124
98
96*
93
94
95
53
53
92
81
80
79
80
108
119
118
130
69
70
53
34
34
53
34
134
136
135
138
132
122
139
140
97
109
111
110
53
117
137
115
115
53
53
114
82
53
112
142
142
143
97
144
144
138
146
146
Remove this EXPLODED DRAWING from the
user’s manual. Save this EXPLODED DRAWING for future reference.
To identify parts shown on this EXPLODED DRAWING, refer to
the PART LIST on page 19 of the user’s manual.
EXPLODED DRAWING—Model No. PETL50071 R0199A
Page 12
22*
58
78
59
61
62
61
63
64
3
104
35
53
35
53
35
53
35
53
1
2
3
5
6
4
2
12
3
2
11
14
8
9
7
11
7
10
37
15
2
16
17
23
17
17
17
17
24
25
28
25
27
26
26
25
27
24
25
21
76
75
53
73
17
31
29
17
17
66
67
68
54
69
57
71
66
67
56
57
55
54
53
17
17
17
43
57
50
50
49
57
53
46
45
44
42
39
54
30
41
41
43
38
32
36
3
13
126
2
20
3
18
19
17
18
68
52
51
25
127
127
53
91
57
85
129
116
53
47
41
32
147
148
EXPLODED DRAWING—Model No. PETL50071 R0199A
Page 13
141
90
99
77
77
77
117
118
119
128
120
128
53
123
53
53
124
96*
93
94
95
53
92
130
53
34
34
134
138
115
53
53
114
53
112
4
146
22*
58
78
59
61
62
61
63
64
3
35
53
35
53
6
3
8
9
7
11
7
10
37
23
17
24
25
28
25
27
26
26
25
27
24
25
76
75
53
73
17
31
29
17
17
66
67
68
54
69
5
7
42
39
54
30
41
41
43
38
32
36
129
116
53
47
41
32
147
148
Loading...