Pro-form Edge 4001 User Manual

Senal Number Decal

QUESTIONS?

PRO.FORM"

TM

TRAINING SYSTEM

As a manufacturer, we are
committed to providing you

complete customer satisfac-
tion. ff you have questions,

or find there are missing or
damaged parts, we will
guarantee you complete
satisfaction through direct
assistance from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL
DIRECT TO OUR TOLL-FREE

CUSTOMER HOT LINE.

The trained technicians on

our Customer Hot Line will

provide Immediate assist-

ance, free of charge to you.

CUSTOMER HOT LINE:

1;800-999.3756

Mon.-Fri., 6 a.m.-6 p.m. MST.

CAUTION:

Read all safety precautions
and instructions in this man-

ual carefully before using
this equipmenL Save this
manual for future reference.

OWNER'S MANUAL

SOLD BY SEARS, ROEBUCK AND CO., CHICAGO, IL 60684

TABLE OF CONTENTS

Important Safety Precautions ....................... 2

Before You Begin ................................ 3

Assembly ....................................... 4

Operation and Adjustment ......................... 5

Maintenance and Trouble-Shooting .................. 7

Exercise Guidelines .............................. 8

Part List ........................................ 10

Exploded Drawing ............................... .-11

Ordering Replacement Parts ................ Back Cover

Warranty ................................ Back Cover

IMPORTANT SAFETY PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important safety precautions
before using the system.

.

Read all instructions in this owner's manual before using the system. Use the system only
as described in this owner's manual.

2. Inspect and tighten all parts each time the system is used. Replace any worn parts.

3. Always wear shoes for foot protection. Keep your hands away from moving parts other than
the designated handles. Keep small children away from the system at all times.

4. To prevent damage to the system, do not put any pressure on the system while changing the

weight. Never use more than one cable at a time.

5. Always remove the lat bar and chain when not in use (see OPERATION AND ADJUSTMENT

in this manual).

6. Never release the press arm, butterfly arms, lat bar or leg lever while they are under tension.

WARNING: Before beginning this or any exercise.program, consult with your physician.

This is especiallyimportant for individuals t)verthe age of35 orpersons with pre-existing

2

health problems. Read all Instructions before using. Sears assumes no responsibility

for personal Injury or property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Congratulations for selecting the Pro Form EDGE 4001 Multi-Dimensional Training System. The
unique EDGE 4001 is a total body conditioning system, offering both weight training and aerobic

exercises. Moving from station to station on the EDGE 4001 is quick and easy, and the digital hand
control allows you to change weight with the touch of a button. Whether you want to build dramatic

muscle size and strength, shape and tone your body, increase your endurance and flexibility or develop
your heart and lungs, the EDGE 4001 will help you achieve your goals in the privacy and comfort of
your home.

This manual is provided to help you understand the easy assembly, adjustment and operation of the

system. For your safety and benefit, read this manual carefully before using the system. If you
have additional questions, please call our Customer Service Department toll-free at 1-800-999-3756,

Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you,
please note your product model number and serial number before calling. The model number is listed

on the front cover of this manual. The serial number is recorded on a decal attached to the system

(see the front cover for the location of the decal).

Before reading further, please review the drawing below and familiarize yourself with the parts labeled.

Upper Cable

Frame

Moment Arm

Press Arm

Lat Bar

Bu_effly Arms

Middle Cable

Backrest

Seat Support

Hand Control

Leg Lever

Lower Cable

Control Stand

Base Extension

3

ASSEMBLY

Two persons are recommended in order to assemble the system. Set all parts in a cleared area.

Make sure that all parts are Included before disposing of the packing materials. Read each step

carefully before beginning. Assembly can be completed using a standard screwdriver and two
adjustable wrenches (not included).

.

Press a Front Stabilizer Endcap (70) onto each side of
the front stabilizer of the Frame (1). Slide the Base
Extension (47) onto the Frame, and align the holes.

Attach the Base Extension with the two Extension Bolts

(48) and Nylock Nuts (3).

70

.

Rotate the Leg Lever (42) to the position shown. Insert

the bracket on the Seat Support (40) into the slots in the

Side Shields (55, 56). Slide the bracket onto one of the

three sets of pins welded to the Frame (1). Use the pins
which set the Seat Support in the most comfortable

exercising position. WARNING: Be sure the pins are
Inside of the slots in the bracket.

Slide the four Leg Lever Pads (41) onto the posts on the
Seat Support (40) and Leg Lever (42).

,

Attach the Hand Control (51) to the Control Stand (50)
with the two Control Stand Screws (69). Plug one end of
the Control Cord (49) into the Hand Control. Plug the

other end of the Control Cord intothe Control Cord

Socket (67) at the front of the system.

.

Press a Rear Stabilizer Endcap (2) onto each end of the

rear stabilizer of the Frame (1). Plug the Power Cord

(68) into the socket at the back of the system.

67

4

68

4