• r ,
TABLEOF CONTENTS
LIMITEDWARRANTY ................................. 2
IMPORTANT SAFETYPRECAUTIONS .......................................................... 3
BEFOREYOU BEGIN ......................................... 4
ASSEMBLYAND OPERATION ............................................................. _.,5
TROUBLE-SHOOTING AND MAINTENANCE .................................................... 8
PARTUST . . . .................................... 10
EXPLODEDDRAWING ........................ ...... 11
ORDERING REPLACEMENTPARTS Back Cover
0
t LIMITED WARRANTY
Proform FitnessProducts, Inc. ("PROFORM"), warrants this product to be free from defects in workmanship
and material, under normal use and service conditions, for a period of ninely (90) days from the date of pur-
chase. PROFORM extends a limited ten (10) year warranty on the frame and steel parts. This wari'anly
e,vJendsonly to the original purchaser. PROFORM's obligation under this warranty is limited to replacing or
repairing, at PROFORM's option, the product at one of its authorized servicecenters. All productsfor which
warranty claim is made must be received by PROFORM at one of its authorized servicecenters. All relums
must be pre-authorized by PROFORM. Thiswarranty does not extend to any product or damage to a product
caused by or attributable to freight damage, abuse, misuse, improperor abnormal usage or repairs not pro-
vided by a PROFORM authorized servicecenter or for products used for commercialor rental purposes. No
other warranty beyond that specificallyset forth above is authorized by PROFORM.
PROFORM IS NOT RESPONSIBLEOR LIABLE FOR INDIRECT, SPECIALOR CONSEQUENTIAL DAMAGES
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCTOR OTHER
DAMAGES WITH RESPECTTO ANY ECONOMIC LOSS, LOSS OF PROPERTY,LOSS OF REVENUESOR
PROFITS, LOSS OF ENJOYMENT OR USE, COSTS OF REMOVAL, INSTALLATION OR OTHER CONSE-
QUENTIAL DAMAGES OF WHATSOEVER NATURE. SOME STATESDO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, THE ABOVE UMITATION
MAY NOT APPLYTO YOU.
THE WARRANTY EXTENDEDHEREUNDERIS IN LIEU OF ANY AND ALL OTHERWARRANTIES AND ANY
IMPLIEDWARRANTIES OF MERCHANTABILITY OR FITNESSFOR A PARTICULARPURPOSEISUMITED IN ITS
SCOPE AND DURATION TO THE.TERMS SET FORTH HEREIN. SOME STATES DO NOT ALLOW UMITA-
TIONS ON HOW LONG AN IMPUED WARRANTY LASTS. ACCORDINGLY, THEABOVE UMITATION MAY
NOT APPLYTO YOU.
Thiswarranly elves you specificlegal righls. You may also have other rightswhich vary from stateto state.
PROFORM FITNESSPRODUCTS,INC., 1500 S. 1000 W._ LOGAN UT 84321-9813
IMPORTANT SAFETY PRECAUTIONS
WARNING:To ._, _,,k of bums, fire, electric shock or Injury to persons, read the following
important safely precautions and information beforeoperating the CROSSWALK.
1,
Place the CROSSWALK on a level surface,wilh at least 8 feet of clearance behind it. Do not place the CROSS
WALK near water, outdoors or on a surfacethat blocksany air openings. Do not operate the Ireadmill where
aerosol productsare used or where oxygen isbeing adminlstered.
J
When plugging the power cord in (seeOPERATIONAND ADJUSTMENT),plug the power cord directly intoa
grounded circuitcapable of carrying 12 or more amps. No other appliances should be on the somecircuit.
Keep the power cord away from heated surfaces. If an extension cord is needed, use only a 14-gauge general-
purposecard of five feet or lessin length with a three-wlre conductor.
t
Q
1
Never move the walking belt while thepower isturned off. Do not operate the treadmill if the power cordor
plug isdamaged, or if the CROSSWALK isnot working properly. (SeeBEFOREYOU BEGIN if the CROSSWALK
isnot working properly.)
The rollerguards mustbe 1/8 inch from the rear roller.Turnthe power off and adjustthe rollerguards, if nec-
essary.
Wear appropriate clothingwhen exercising.Never wear looseclothing that could become caught in the CROSS
WALK. Always wear athlellc shoes;neverusethe CROSSWALKwith bare feet, weadng only stockingsor in
sandals. Athletic support clothesare recommendedfor bothmen and women.
6. The pulse earclip is not a medical device.Various factors, includingthe user's movement while exercising,may
affect the accuracy oFheart rate readings.The earclip isintended only as an exercise aid in determining heart
rate trends in general.
o
Never start the CROSSWALK while you are standingon the walking belt. Always hold the upper body arms
when exercisingon the CROSSWALK.
8. To reduce the possibility of overheating, neveroperate the CROSSWALK continuouslyfar longer than 1 hour.
o
Never allow more than one person on theCROSSWALK at a time. The CROSSWALK should be used only by
personsweighing 250 poundsor less.
Usethe CROSSWALK only as describedinthismanual.
Keep small children away from the CROSSWALKat all times. Never leave the CROSSWALK unattended while
thewalking belt is moving. Always turn thepower off when the CROSSWALK is not in use.
12. Never dropor insert any object into an), opening.
13. The CROSSWALK is capable of high speeds.Adjustthe speed slowly to avoid sudden jumps in speed.
14.
Always unplug the power cord before performingthe maintenance and adjustment procedures describedin this
manual. Never remove the motor hood unlessinsh'uctedto do so by an authorized service representative.
Servicingother than the proceduresdescribedin this manual should be performed by an authorized san,lee
representaHveonly.
WARNING:BeForebeglnnlng this or any exerciseprogram, consultyour physician. Thisis especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all instructionsbefore
using the CROSSWALK. PROFORM assumesnor0sponsibilityfor personal injury or property damage sustainedby
or through Ihe useoFthe CROSSWALK.
SAVETHESEINSTRUCTIONS
BEFORE YOU BEGIN
Congralulatbns for selectingthe PROFORM* CROSS WALK Dual Molbn CrossTraln_'. The CROSS WALK combines
thebest featuresof today's mostpopular home exerciseequipmentinone €ompod unit.The naturaJmotion and versa-
filityof treadmillshave made them the most popular way to getan effectivelower body and cardiovascularworkout.
Now with the dual motiondesign of the CROSS WALK, you can geta completeupper body workoutas well. And the
adjustability of the CROSS WALK allows every userto work at theirown level. Whether you are a beginneror a sea;
sonedathlete, you'll enjoy the performanceand uncompromisingqualitythatonly the CROSS WALK offers.
For your salty and benefit, read Ibis manual carefully before usingthe CROSSWALK. If you haveaddillonal ques-
tions, please call our CustomerService Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until
6 p.m. Mountain Time (excludingholidays). To help usassistyou, pleasenote the product model numberand serial
• number before calling. The model number is DR705021/PF705021. The serial numbercan be foundona decal
attached to the CROSS WALK (seethe drawing below for the location of the decal).
Before reading furlher, please review the drawing below and familiarize yourself with the parts that are labeled.
Upper Body Arms Speed ControlKnob
Co_l$ole
PulseEarcllp
InclineLever
FRONT
Lock
Upright
Resistance Control _
Serial Number Decal.
Motor
Power Cord
Tabs
FootRc
LEFTSIDE
Walking Belt
Platform .RollerGuards
i BACK
Rear LegPad__._ Rear Roller
Adjuslment Bolls
4 Note: The rear leg pad may mark some lypesof linoleum. Mild household cleaningagenls will removeany marks.
ASSEMBLY AND OPERATION
TheCROSS WALK isdelivered in the compactstowaway position. Set
theCROSSWALK in a cleared area and removeall packihg materials.
Make surethatall partsare includedbeforedisposingof Ihe packing
materials.Slidethe LockKnobWasher (78) ontotheI.o_kKnob(77).
Raisethe Upright(10) to the verticalpositionand lightenIhe LockKnob
intothe Upright.The useof theremaining parts will be describedin
othersectionsof this manual.
_ 10
APPLYINGSIUCONE LUBRICANT
To reducethe Frictionof thewalkingbeltand minimizewear, a non-oil-,
non-petroleum-basesiliconelubricantmustbe applied to the walking
platform beforethe CROSSWALK is used.WITH THEPOWER CORD
UNPLUGGED,lifteach sideof thewalking belt and spray lubricantgen-
erouslyonlo the indicated area. Reapplylubricantafter every tenhours
of use,or wheneverperformance decreases.Lubricantisavailable at
hardware and automotivestores.Uni*SportTM sprayisrecommended.
PLUGGING IN THEPOWER CORD
Thisproduct mustbe grounded. If itshouldmalfunctionor break down, grounding providesa path of leastresistance
for electriccurrentto reducethe riskof electricshock.This productis equipped with a cord having an equipment-
groundingconductoranda groundingplug. PlugIfle power cord intoan appropriate outlet Iflat is properly installed
and grounded in accordancew;th all localcodesand ordinances.
A DANGER:Improperconnectionof the equlpment-grounding conductor can resultin a riskof electricshock.
Check with a qualified electricianor serviceman ifyou are in doubt as to whether the productis properlygrounded. Do
notmodify theplug provided with the product--if itwill not fit theoutlet, have a proper outletinstalledby a qualified
electrician.
This product is for useon a nominal 120-volt circuit, and has a grounding plug as shownin Drawing 1. A temporary
adapter like the adapter shown in Drawing 2 may be usedtoconnectthis plug toa 2-pale receptacleas shownin
Drawing 2 iFa properly grounded outlet is not available.The temporary adapter shouldbe usedonlyuntila properly
grounded outlet(Drawing 1) can be installed by a qualified electrician.The green-coloredear, lug, or the like extend-
ing fromthe adapter must be connected to a permanent ground suchas a properly groundedoutletbox cover.When-
ever the adapter is used,it mustbe held in place by a metalscrew. Some 2-pole receptacle outletbox coversare not
grounded. Contacta qualified eledrician to determine if Ifle outletbox cover isgrounded before usingan adapter.
1
GroundedOutletBox
GroundingPlug
Grounding Pin
Grounded Outlet
Matal Screw
Grounded Outlet Box
Grounding Pin
Grounding Plug
S
DIAGRAMOFTHECONSOLE
TheCROSSWALKfeaturesthe innovativeACCUSMART consc,le,_igned Io help you get the mostfrom your work-
outs.The ACCUSMART consoleofferselectronicspeedconirol, finger-touchinclinecontroland a motlvotional illness
monitor with five independentdisplays. Pleaseread theinstructionsbelow before operating the console.
AOI BMAFfl .,.++..o,+0,,
I I
Motivational Fitness Monitor - J J
I I
Baltery Cover
:'_lffD
I I
D_'TAJ_K_
7---1
! I
m
w
.Speed'' ' " " Control Knob
_.,/Pulse Earclip Jack
Power Indicator "_Power Switch
Incline Control Lever i _1
I
+fi
INSTALLING BATrERIES
The motivational illnessmonitor requirestwo "AA" batteries(not
included); alkaline batteries are recommended,slide thebattery cover
open. Grasp the red cord and remove the battery clip from the console.
Find the markings insidethe battery clip showingwhich dir_on the
batteries should be turned. Pressthe batteriesintothe battery clip.
Replace the battery clip in the console and close the battery cover.
Battery Cover
+.--+..
BatteryClip
,I
TURNING THE POWER ON
Step onto the foot rails of the CROSS WALK and hold the upper body arms. (SeeOPERATING THE UPPERBODY
ARMS on the following page.) Locate the clip attached by a cord to the safely key. Slide the clip onto your waistband.
CAUTION: Do not stand on the walking belt while turning the power on. Always wear the clip while operating the
CROSS WALK; if youfall, the safety key will be pulled from the power switch, instantlytumlng the power off.
Insert the safety key into thepower switch.The power indicatorwill light. The five displaysof the motivational fitness
monitor will not light until theON/CLEAR buttonis pressedor the walking belt begins to move. (See CONTROllING
THE SPEEDOF THEWALKING BELTbelow.) Note: If batteries were just installed,the five displayswill be lighted
already.
CONTROLUNG THESPEEDOF THE WALKING BELT
For your safely, the walking belt will be motionless each iime the power isturned on. To start the walking belt, first turn
the speed control knob tothe "reset" position. Next, turn the knob slowlyclockwise until the walking belt begins tomove
at slow speed. CAUTION: After the knob is turned, there will be a brief pause before the walking belt begins to
move. Adjust the speed slowly until you are familiar with the operation of the CROSSWALK.
Step carefully onto the walking beltand begin exercising.Change the speed o[ the walking belt as desiredby luming
the speed control knob. To stopthe walking belt, turn the knob to Ihe 'reset' position.
CHANGING THE INCUNE
Tovary the intemily ofyour exercise,the inclineof the CROSSWALK can be changed usingthe leveron the rightside
of Iheconsole.To increasethe incline, stand toward the back of the foot rails and pull back lhe leveruntilthe desired
inclineisreached. Todecrease the incline, stand toward the front of the foot rails, lean forward, and pull back the
lever.CAUTION: Do not change the inclinewhile you are walking or running on the CROSSWALK.
OPERATINGTHE UPPERBODY ARMS
Theupperbody arms can be usedin eitherthe stationarypositionor the
dua! motion position. To use the upper body arms in the stationaryposi-
tion, insert the lock pin through the arms and the upright. Attach the
spring clip to the end of the lock pin. Make sure that thespring clip
passesover thedetentball (see the inset drawing.) To usethe upper
body arms in the dual motionposition, first turn the resistance control
clockwiseto increase theresistance. Removethe lock pin from thearms
and the upright, and insert it through the safely tabs at the base of the
upright. Attach the spring clip to the lock pin. In the dual motion posi-
tion, you can move the arms forward and back as you walk or run,
exercisingyour arms, back and shoulders for a total body workout. To
taibr the intensity of your exercise, the resistance of the arms can be
changed. To increase theresistance, turn the resistancecontrol clock-
wise; to decrease the resistance,turn the control counterclockwise.
Lock Pin
Control
/ Spring
)etentBall
CAUTION:Always insertthe lock pin through the safelytabs when using theupper body arms in the dual motion
position,if you fall while exercising, the lockpin will limit the downward movementof the arms. When the lockpin is
insertedthrough Ihe safely labs, do nat lean on the upper body arms or the lock pin may be damaged. If the spring
clipis not attached tothe lock pin as instructed,the lock pin may slip out, resulting in injuring to the user.
OPERATINGTHE MOTIVATIONAL FITNESSMONITOR
Thefivedisplays of Ihe motivational fitnessmonitor are designed to provide you with instantexercise feedback.To reset
thedisplays,press theON/CLEAR button. The five displays are described below:
TIME--Thisdisplay showsthe elapsed time..Note: When the walking belt is stopped,the TIMEdisplaywill go into a
pausemode after a few seconds.
CALORIE--This displayshowsthe total number of nutritional Calories that you have burned.
PULSE--Thisdisplay showsyour heart rate. Plug the pulse earclip into the
consoleand hook the metal clothes clip onto theearclip wire. Altach the
eardip to your left ear lobe and slide the clothes clip onto your collar.
(When using the upper body arms in the dual motion position, attach the
earcliptoyour right earlobe.) After a few seconds,your heart rate will
be displayed.If your heart rate is not displayed, rub your ear lobe and
reposition the earclip. It may also be helpful to standstill for a moment.
SPEED--Thisdisplay showsthe current speedof the walking belt.
DISTANCE--This displayshowsthe total distance that you have walked or run.
TURNINGOFF THEPOWER
To lure offthe power, removethe safelykey from the power switch.Keep the safely key in a secure location. Thefive
displaysof the motivationalfitnessmonitorwill turn off automaticallya few minutesafter the walking belt is stopped.
7
TROUBLE-SHOOTING AND MAINTENANCE
Most problems can be solved by following the simple steps below. If Furtherassistanceis needed, ploar_ call our
CustomerServiceDepartment toll-freeat 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountaln Time
(excludingholidays).
1. SYMPTOM' THEPOWER DOES NOT TURNON
a. Make surethat the power cord is plugged in properly. (SeeOPERATION AND ADJUSTMENT.) Ifan extension
cord is needed, useonly a 14-gauge general-purpose cord of five feetor lessin length.
b. Make surethat the safetykey is insertedfullyinto the console. Turn the speed control knob to the "reset" posi-
tion. (See OPERATION AND ADJUSTMENT.)
0
c. Check the circuit breaker locatedon the front of the frame. The
circuitbreaker is designed to protectthe electrical system.If the
circuitbreaker has tripped, the switchwill protrude as shown.
To resetthe circuit breaker, allow the CROSS WALK to cool for
five minutes,and then push the switchback in.
SYMPTOM: THEPOWER TURNS OFF DURING USE
a. Make surethat the power cord is plugged in.
g
Tripped
Reset
b.
Check the circuitbreaker locatedon the front of the frame. If the circuit breaker has hipped, the switchwill pro-
trude. (Seethedrawing above.}To"resetthecircuit breaker, allow the CROSSWALK to cool for five minutes,
and then push the switchback in.
c. Remove the safely key from the console. Relnsertthe safetykey fullyinto the console. Turn the speed controlknob
to the "reset" position.
3. SYMPTOM: THEMOTIVATIONAL FITNESSMONITOR DOES NOT FUNCTION PROPERLY
a. Check thehatteries in the console. (See OPERATION AND ADJUSTMENT.) Most problems are the resultof
drained batteries.
8
4. SYMPTOM: THE PULSEEARCUPDOES NOT FUNCTION PROPERLY
a. Make surethat the pulse earclip is plugged fully into the console,A#ach the metal clip to your collar.
b. Rub your ear lobe and reposition the earclip.
c. Stand still while measuring your pulse.
d. The pulse earclip may need to be cleaned. Press the earclip open, and wipe the twoclear circles insidethe
earclip, usinga cotton swab saturatedwith denatured alcohol.
A WARNING:Th. a dlp°o,o medical device. Various factors, including your move-
men! while exercising, may affect the accuracy of heart rate readings. The earcllp is intended only al an
exercise aid indetermining heart rate trends in general.
5. SYMPTOM: THE CROSSWALK DOES NOT INCLINE
a. Standat the back of the footrailswhile increasingIhe incline.Stand at the front of the foot mils and lean for-
"ward while decreasingthe incline. (SeeOPERATION AND ADJUSTMENT.)
6. SYMPTOM: THEWALKING BELTSLOWSWHEN WALKEDON
a.
Siliconelubricant mustbe applied tothewalking platformbefore the CROSS WALK isused. Lubricantshouldbe
reapplied afterevery 10 hoursof use,and whenevera decreasein performance is noticed.(See OPERATION
AND ADJUSTMENT for applicationinstructions.)Uni0Sportsiliconespray isrecommended. CAUTION: ALWAYS
UNPLUGTHE POWER CORD WHEN APPLYINGLUBRICANT.
b.
C.
If an extensioncord is needed, use only a 14-gauge general-purpose cord of five feetor less in length.
If thewalking belt is overtightened,performance may be reduced
and the walking belt permanently damaged. UNPLUGTHE POWER
CORD. Using theallenwrenchincluded,turnbothrear roller
adjustmentboltscounterclockwise1/4 of a turn. When the tension
of the walking belt iscorrect, you shouldbe able to lifteach side of
the walking belt 2-3 inches;the center of thewalking beltshould
justtouchthe surfaceof the walking platform.Be sureto keep the
walking belt centered. Runthe treadmillfor a fewminutes.Repeat
untilthe tensionof the walking belt is correct. Note: Storethe allen
wrench in the handy wrench clip. Removethe backingfrom the
wrench clipand pressthe wrench clip onto one of the endcaps.
2"-3" RearRoller
AdjustmentBolts
Wrench CliI
7. SYMPTOM: THEWALKING BELTIS OFF-CENTEROR SUPS
a.
b.
Ifthe walking belt hasshiftedto the left, firstUNPLUGTHE
POWER CORD. Using theallenwrenchincluded,turn the left rear
roller adjustmentboltclockwise, and the rightbolt counterclock-
wise 1/4 of a turn each. Runthe treadmillfor a few minutes.
Repeatas necessaryuntilthewalking beltis centered.
ff the walking belt has shiftedto the right, first UNPLUGTHE
POWER CORD. Using the allen wrench included, turn the left rear
roller adjustment boll counterclockwise,and the right bolt clock-
wise 1/4 of a turn each. Runthe treadmill for a few minutes.
Repeatas necessary untilthe walking belt is centered.
C_
If thewalking belt slipswhen walked on, first UNPLUGTHE
POWER CORD. Usingthe allenwrench included,turnboth rear
rolleradjustmentboltsclockwise 1/4 of alurn. When the tensionof
thewalking belt iscorrect,you shouldbe able to lifteach sideof
thewalking belt 2-3 inches;the center of thewalking belt should
just touchthe walking platform.Besureto keepthe walking belt
centered. Runthe treadmillfora few minutes.Repeatas necessary
untilthe tensionof thewalking belt iscorrect.
a.
Beforeconvertingthe CROSSWALK tothe stowaway position,lurn the resistancecontrol (seethe drawing on page
7) counterclockwiseuntil thecanlrol turns freely. Next, unplugIhe power cord. RemoveIhe lockknob and washer
fromIheupright and lay the uprightand Ihe upper body armson the walking belt. Keepthe lock knob and washer in a
securelocation.
.g
PART LIST-Model No. DR705021/PF705021
Key Key
No. Qty. Description No. Qty. Descrlpfion
Rev. 4/93
• ¢ .
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
1 LeftUpper Body Arm w/Foam 45 4 Motor Mount Isolator
1 RightUpper BodyArm w/Foam 46 1 Motor
1 ClothesClip 47 1 Motor Ground Strap
1 PulseEarclip 48 1 Pulley/Flywheel/Fan
1 Safety Key/Clip 49 2 Foot Rail
21 Screw 50 2 Roller Spacer
1 Console 51 2 Incline Leg Bolt
1 Speed Control Knob 52 1 Incline Leg
1 Incline Lever 53 1 Frame
1 Upright 54 1 Walking Platform
1 LockPin 55 6 PlatformScrew
1 Controller 56 3 Roller Adjustment Washer
6 Hood Screw/Foat Rail Screw 57 1 Front RollerAdjustment Bolt
1 Motor Hood w/Decal 58 1 Front Roller/Pulley
1 ResistanceControl 59 1 Walking Belt
2 FrictionBracket 60 8 Foot Rail Fastener
2 Nylon Washer 61 t Rear Leg Pad
2 - Upper.Body Arm Housing 62 1 Right Endcap
2 FrictionPlate 63 4 Endcap Screw
1 Incline Cable 64 2 Rear Roller Adjustment Bolt
3 Nut 65 1 Wrench Clip
1 TensionSpring 66 1 Allen Wrench
2 TensionWasher 67 1 Rear Roller
1 Carriage Bolt 68 2 RollerGuard
4 Hood Bracket 69 2 Guard Screw
1 Circuit Breaker 70 2 Belt Guide
1 Grommet 71 1 Left Endcap
1 Ground Washer 72 1 Magnet
1 •Choke 73 1 Reed Switch/Sensor Wire
1 PowerCord 74 1 SwitchScrew
8 Motor Pan Screw 75 1 Belt
1 Motor Pan 76 6 Wire Clip
3 -::LookNut 77 1 Lock Knob
2 FrontWheel 78 1 LockKnob Washer
2 Wheel Bolt 79 1 FrictionCover
1 ShockRelease 80 1 Pivot Bolt
1 ShockBracket 81 2 Upper BodyArm FoamGrip
1 E-Clip 82 4 Hood BracketScrew
1 ShockCushion 83 8 Motor Nut
1 InclineShock 84 1 Cage Nut
1 Shock Pin 85 1 Spring Clip
1 CotterPin # ! Owner's Manual
1 Motor PivotBolt # 1 FitnessJournal
1 Motor Mount Plate
10...
Note: "#" indicatesa non-illustratedpart. Specificationsare subjecttochange without notice. See the backcoverof this
manual for informationabou! ordering replacement pads.
i
EXPLODED DRAWING-Model No. DR705021/PF705021 R_,.4/93
81
81
2 i
4
6
13 "..
/ . 14 22 ""'.
i / 24
°
.....--
17
8
9
it---- 6
10
85
77
9 18
79
80
6
71
5
66
64
58
55
4,
I
f.
69
55 6
61
!
@
63
.
49
21
13'
70
.,"!.
52
83,_,.,-
"1
!
I
i
J
!
34"_
i
i 36
i
J
L
4,3
© 1993 ProformFitnessProducts,Inc., a SubsidiaryofWelder Health and Filness,Inc. 1.1
.ORDERING REPLACEMENT PARTS
To order replacement parts, simplycall our CustomerServiceDepartment toll-freeat 1-800-999-3756, Monday
through Friday, 6 a.m. until6 p.m. Mountain Time (excludingholidays), b_/hen orderingparts, pleasebe prepared to
give the following information:
1. The MODEL NUMBER oFthe produd. (DR705021/PF705021)
2. The N,/_E of theproduct. (PROFORM* CROSS WALK Dual Motion CrossTrainer)
3. The SERIALNUMBER of the product. (See BEFOREYOU BEGIN.)
4. The KEY NUMBER oFthe parffs) needed. (See page 10 of this manual.)
5. The DESCRIPTIONof the part(s) needed. (Seepage 10 of this manual.)
If passible, place the CROSS WALK near your telephone for easy reference when calling.
PartNo. 111906 4/93
Printedin USA
Loading...