Model No. PFEX35430
Visit our website at
www.proform.com
new products, prizes,
fitness tips, and much more!
Serial No.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
USER'S MANUAL
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLLFREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
OMER HOT LINE:
CUST
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Patent Pending
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
2
IMPORTANT PRECAUTIONS
o reduce the risk of serious injury, read the following important precau-
WARNING:
tions before using the exercise cycle.
T
1. Read all instructions in this manual before
using the exercise cycle.
2. Use the exercise cycle only as described in
this manual.
3. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.
4. The exercise cycle is intended for in-home
use only. Do not use the exercise cycle in a
commercial, rental, or institutional setting.
5. Keep the exercise cycle indoors, away from
moisture and dust. Place the exercise cycle
on a level surface and place a mat under the
exercise cycle to protect the floor or carpet.
6. Inspect and properly tighten all parts regularly.
Replace any worn parts immediately.
7. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
8. The exercise cycle should not be used by
persons weighing more than 250 pounds.
9. Wear appropriate clothes when using the
exercise cycle; do not wear loose clothes
that could become caught on the exercise
cycle. Always wear athletic shoes.
10. Always keep your back straight when using
the exercise cycle; do not arch your back.
11. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
12. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
13. The exercise cycle does not have a freewheel; the pedals will move until the flywheel
stops.
WARNING: Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
3
BEFORE YOU BEGIN
Congratulations for selecting the new PROFORM
C55 exercise cycle. Cycling is one of the most effective exercises for increasing cardiovascular fitness,
building
PROFORM C55
array of features designed to let you enjoy this healthful exercise in the comfort and privacy of your home.
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please call our Customer
endurance, and toning the entire body. The
exercise cycle offers an impressive
Handgrip Pulse Sensor
Handlebar
Seat
®
Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please mention the product model number and serial
number when calling.
PFEX35430. The serial number can be found on a
decal attached to the exercise cycle (see the front
cover of this manual for the location of the decal).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
The model number is
Bookrack
Console
Backrest
Seat Knob
BACK
Bottle Holder*
Pedal with Strap
Wheel
Seat Handle
RIGHT SIDE
*No bottle is included
4
ASSEMBLY
M6 Washer
(25)–6
M8 Split
Washer (70)–4
M8 Flat
Washer (18)–4
M8 Nylon
Locknut (56)–8
M10 Nylon
Locknut (63)–4
M4 x 16mm
Screw (21)–4
M4 x 21mm
Screw (81)–2
M6 x 16mm
Screw (62)–2
M8 x 19mm Button
Bolt (43)–4
M8 x 25mm Button
Screw (27)–4
M8 x 39mm Button
Bolt (47)–4
1/4” x 16mm Hex
Screw (29)–4
1/4” x 38mm Hex
Screw (78)–4
M10 x 91mm Carriage Bolt (35)–2
M10 x 105mm Carriage Bolt (36)–2
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench .
Refer to the drawings below to identify the small parts needed for assembly. The number in parenthesis below
each drawing is the key number of the part, from the PART LIST on page 22. The number following the key
number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a
part is not found in the parts bag, check to see if it has been pre-assembled.
5
1. Identify the Front Stabilizer (2). Attach the Front
Stabilizer to the front of the Frame (1) with two M10
x 91mm Carriage Bolts (35) and two M10 Nylon
Locknuts (63). Make sure that the Front Stabilizer
is oriented so the Wheels (75) are not touching
the floor.
1
75
35
75
1
2
63
2. Attach the Rear Stabilizer (3) to the rear of the
Frame (1) with two M10 x 105mm Carriage Bolts
(36) and two M10 Nylon Locknuts (63).
3. While a second person holds the Handlebar Post (6)
near the Frame (1), connect the Upper Wire
Harness (16) to the Lower Wire Harness (77).
Carefully slide the Handlebar Post (6) onto the
Frame (1); be careful to avoid pinching the Wire
Harnesses (16, 77). Attach the Handlebar Post with
four M8 x 25mm Button Screws (27) and four M8
Split Washers (70).
2
63
3
1
36
3
16
6
70
27
70
Hold the Left Handlebar (32) on the left side of the
4.
Handlebar Post (6). Connect the left Pulse Sensor
Wire (71) to the Pulse Wire Harness (22). Next, slide
the Left Handlebar onto the small tube on the left
side of the Handlebar Post. Attach the Left
Handlebar with two M8 x 39mm Button Bolts (47)
and two M8 Nylon Locknuts (56);
damage the Pulse Sensor Wire or the Pulse Wire
Harness as you insert the Button Bolts. Make
sure that the Nylon Locknuts are resting in the
hexagonal holes in the Left Handlebar.
Attach the Right Handlebar (33) in the same way.
be careful not to
71
22
16
77
1
56
33
4
47
32
27
47
6
71
56
6
5. Hold the Console (9) near the Handlebar Post (6).
Connect the wire harness on the Console (9) to the
Upper W
nesses into the Handlebar Post.
ire Harness (16). Then, insert the wire har-
5
Attach the Console (9) to the Handlebar Post (6)
with four M4 x 16mm Screws (21).
avoid pinching the wire harnesses.
Attach the Bottle Holder (69) to the Handlebar Post
(6) with two M4 x 21mm Screws (81). Note: The
bottle holder is designed to be used with your own
bottle.
6. Attach the Seat (12) to the Seat Carriage (11) with
four 1/4” x 16mm Hex Screws (29) and four M8 Flat
Washers (18).
Be careful to
21
16
69
6
6
Wire
Harness
81
9
12
Attach the Right Seat Handle (31) to the Seat
7.
Carriage (11) with two M8 x 19mm Button Bolts (43)
and two M8 Nylon Locknuts (56).
Attach the Left Seat Handle (14) to the Seat
Carriage (11) in the same way.
11
18
29
7
14
31
11
56
43
7
8. Attach the Backrest (13) to the Seat Carriage (11)
with four 1/4” x 38mm Hex Screws (78) and four M6
Washers (25).
8
25
11
13
9. Pull the seat knob and slide the Seat Carriage (11)
onto the Seat Rail (7).
See the inset drawing. Hold the Bumper Axle (73)
inside of the Seat Rail (7). Attach the two Bumpers
(65) to the ends of the Bumper Axle with two M6 x
16mm Screws (62) and two M6 Washers (25) as
shown. Press the Seat Rail Endcap (23) into the
end of the Seat Rail.
10. Firmly tighten the four M8 x 31mm Button Bolts (80)
in the Seat Carriage (11). Note: There are two
Button Bolts in each side.
9
10
78
11
25
Knob
23
62
65
73
25
7
25
65
62
7
Pull the seat knob and slide the Seat Carriage (11)
to the desired position. Release the seat knob, and
slide the Seat Carriage back and forth slightly
until it locks into position. Make sure to regularly
tighten the four M8 x 31mm Button Bolts (80).
11. Identify the Right Pedal (37), which is marked with
an “R.” Using an adjustable wrench, firmly tighten
the Right Pedal clockwise into the right arm of the
Crank (19). Tighten the Left Pedal (not shown)
counterclockwise into the left arm of the Crank (not
shown). After using the exercise cycle for one
week, retighten the Pedals.
Attach the Right Pedal Strap (38) to the Right Pedal
(37). Press the end of the Right Pedal Strap onto
the tab on the Right Pedal.
Strap (not shown) in the same way.
12. Make sure that all parts are properly tightened before you use the exercise cycle. Place a mat
beneath the exercise cycle to protect the floor.
Attach the Left Pedal
11
11
80
Knob
19
38
37
Ta b
8
HOW TO USE THE EXERCISE CYCLE
HOW TO ADJUST THE POSITION OF THE SEAT
For effective exercise, the seat should be in the proper
position.
in your knees when the pedals are in the farthest
position. To adjust the seat, pull the seat knob and
slide the seat carriage to the desired position.
Release the seat knob and slide the seat carriage
back and forth slightly until it locks into position.
As you pedal, there should be a slight bend
Seat
Carriage
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal straps, first pull the ends of the
straps of
the desired positions and press the ends of the straps
back onto the tabs.
f the tabs on the pedals. Adjust the straps to
Strap
Ta b
Seat
Knob
9
CONSOLE DIAGRAM
Matrix
Displays
FEATURES OF THE CONSOLE
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the resistance of the pedals can be changed
with the touch of a button. As you exercise, the console will provide continuous exercise feedback. You
can even measure your heart rate using the handgrip
pulse sensor
The console also offers eight workout programs. Each
program automatically changes the resistance of the
pedals and prompts you to increase or decrease your
pedaling pace as it guides you through an effective
workout.
In addition, the console features new iFIT.com interactive technology. Having iFIT.com interactive technology
is like having a personal trainer in your home. Using a
.
stereo audio cable (available at electronics stores), you
can connect the exercise cycle to your home stereo,
portable stereo, computer, or VCR and play special
.com CD and video programs (iFIT
iFIT
videocassettes are available separately). iFIT.com CD
and video programs automatically control the resistance of the pedals and prompt you to vary your pace
as a personal trainer coaches you through every step
of your workout. High-energy music provides added
motivation.
cassettes, call toll-free 1-800-735-0768.
With the exercise cycle connected to your computer,
you can also go to our Web site at www.iFIT.com and
access programs directly from the internet. Explore
www.iFIT.com for more information.
Note: If there is a sheet of clear plastic on the face of
the console, remove it before using the console.
o purchase iFIT
T
.com CDs and video
.com CDs and
-
10
HOW T
O USE THE MANUAL MODE
Begin pedaling to activate the console.
1
The exercise cycle requires no batteries or
external power source. Power is supplied by
a generator as you pedal. To activate the con-
sole, begin pedaling at a speed of about 3 miles
per hour or faster. After a few seconds, the console displays will light, a tone will sound, and the
console will be ready for use.
Select the manual mode.
2
When the power is
turned on, the
manual mode will
be selected and
the Manual
Control indicator
will light. If you
have selected a program or the iFIT.com mode,
press the Program Select button repeatedly until
the Manual Control indicator again lights.
Begin pedaling and change the resistance of
3
the pedals as desired.
As you pedal,
change the resistance of the pedals by pressing
the Resistance
decrease and
increase buttons.
There are ten resistance levels. Note: After the
buttons are pressed, it will take a few seconds for
the pedals to reach the selected resistance level.
Monitor your progress with the matrix and the
4
two displays.
The matrix—
When the manual
mode or the
iFIT.com mode is
selected, a 1/4mile track will
appear in the
matrix. As you
pedal, the indicators around the track will light in
succession until the entire track is lit. The track
will then darken and the indicators will again
begin to light in succession.
The left display—
This display will
show the elapsed
time, the distance
you have pedaled,
and the resistance
level of the pedals.
The display will change from one number to the
next every few seconds, as shown by the indicators around the display. Note: When a program is
selected, the display will show the time
in the program instead of the elapsed time. Each
time the resistance of the pedals changes, the
display will show the resistance level.
If you stop pedaling for a few seconds, a tone will
sound, the console will pause, and the left display
will begin to flash.
The right
display—This dis-
play will show your
pedaling speed and
the approximate
number of calories
you have burned.
The display will change from one number to the
other every few seconds, as shown by the indicators around the display. This display will also
show your heart rate when you use the handgrip
pulse sensor.
Note: The console
can display speed
and distance in
miles or kilometers.
To find which unit
of measurement is
selected, you must
select the user mode. Hold down the Program
Select button for about three seconds to select
the user mode. The letter “E” (for English) or the
letter “M” (for metric) will appear in the left display
o change the unit of measurement, press the
T
Resistance increase button.
While the user mode is selected, press the Start
button. The left display will then show the total
number of hours that the exercise cycle has been
used. Press the Start button again.
will then show the total number of miles pedaled
on the exercise cycle. To exit the user mode,
press the Program Select button again.
remaining
The display
.
11
Measure your heart rate if desired.
5
If there are
thin sheets of
plastic on the
metal contacts on the
handgrip
pulse sensor,
peel off the
plastic. To
measure your
heart rate,
hold the contacts; your palms must be resting on
the contacts closest to you, and your fingers must
be touching the other contacts.
your hands.
Contacts
Avoid moving
(– –) will appear in the display, and then your
heart rate will be shown. For the most accurate
heart rate reading, continue to
for about 15 seconds. Note: If your heart rate is
not shown,
tioned as described. Be careful not to move your
hands excessively or to squeeze the metal contacts too tightly.
When you hold the pulse sensor, the right display
will show your heart rate for about 15 seconds. If
you continue to hold the pulse sensor, the display
will show your heart rate along with the other
modes.
When you are finished exercising, the console
6
will automatically turn off.
make sure that your hands are posi-
hold the contacts
When your pulse
is detected, the
Pulse indicator
below the right
display will light,
one or two dashes
If the pedals are not moved for about one minute,
the console displays will darken. If the pedals are
not moved for about five minutes, the console will
turn off and the displays will be reset.
12
HOW T
O USE A WORKOUT PROGRAM
Begin pedaling to activate the console.
1
See step 1 on page 11.
Select one of the workout programs.
2
When the power is
turned on, the
manual mode will
be selected. To
select a workout
program, press
the Program
Select button repeatedly until one of the eight
program indicators lights.
When a workout program is selected, the matrix
will show the first resistance settings of the program. The left display will show how long the program will last. Note: The eight profiles printed on
the left and right sides of the console show how
the resistance of the pedals and the target pace
will change during the workout programs. The
upper right profile, for example, shows that both
the resistance and the target pace will alternately
increase and decrease during that program.
Program Indicator
move one column to the left. The resistance setting for the second period will then be shown in
the flashing Current Period column, and
resistance of the pedals will automatically change
to the resistance setting for the second period.
Note: If all of the indicators in the Current Period
column are lit after the resistance settings have
moved to the left, the resistance settings will move
downward so that only the highest indicators
appear in the matrix.
During the program, the Target
Pace display will
help you to keep
your pedaling pace
near the target
pace for the current period. When
your pedaling pace is near the target pace, the
round indicator in the center of the display will
light. If one of the upper two arrows in the display
lights, decrease your pedaling pace; if one of the
lower two arrows lights, increase your pace.
Important: The target pace settings are
intended only to provide motivation. Your
pace may be slower than the target pace settings. Make sure to pedal at a pace that is
comfortable for you.
the
Press the Start button or begin pedaling to
3
start the program.
Each program is divided into several time periods
of different lengths. One resistance setting and
one target pace setting are programmed for each
period. (The same resistance setting and/or target
pace setting may be programmed for two or more
consecutive periods.)
The resistance
setting for the first
period will be
shown in the flashing Current Period
column of the
matrix. The resistance settings of
the next several
periods will be
shown in the columns to the right.
When only three seconds remain in the first period
of the program, both the Current Period column
and the column to the right will flash, a series of
tones will sound, and all resistance settings will
Current Period
If you stop pedaling for a few seconds, a tone will
sound and the program will pause. To restart the
program, resume pedaling. The program will continue until the resistance setting for the last period is shown in the Current Period column of the
matrix and the last period is completed.
Note: During the program, you can manually
change the resistance, if desired, by pressing the
when the next
Resistance buttons. However
period begins, the resistance will automatically
change if a different resistance setting is programmed for the next period.
Monitor your progress with the two displays.
,
4
See step 4 on page 11.
Measure your heart rate if desired.
5
See step 5 on page 12.
When you are finished exercising, the con
6
sole will automatically turn off.
See step 6 on page 12.
-
13
HOW TO CONNECT YOUR CD PLAYER, VCR,
LINE OUT
PHONES
LINE OUT
PHONES
PHONES
PHONES
AUDIO OUT
RIGHT
LEFT
LINE OUT
PHONES
OR COMPUTER
o use iFIT.com CDs
T
, the exercise cycle must be con
nected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
14 and 15 for connecting instructions. To use iFIT.com
videocassettes, the exercise cycle must be connected to your VCR. See page 16 for connecting instructions. To use iFIT.com programs directly from our
Web site, the exercise cycle must be connected to
your home computer. See page 15 for connecting
instructions.
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT
and PHONES jacks, see instruction A below. If
your CD player has only one jack, see instruction B.
HOW TO CONNECT YOUR PORTABLE STEREO
Note: If your stereo has an RCA-type
AUDIO OUT
jack, see instruction A below. If your stereo has a
1/8” LINE OUT jack, see instruction B. If your
-
stereo has only a PHONES jack, see instruction C.
A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the AUDIO OUT jack on your stereo.
A/B
A. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your CD player.
Plug your headphones into the PHONES jack.
A
Audio
Cable
Head-
phones
B. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your CD player
. Plug your headphones into the
other side of the Y-adapter.
Audio Cable
B. Refer to the drawing above. Plug one end of a 1/8”
to 1/8” stereo audio cable (available at electronics
stores) into the jack beneath the console. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
C. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your stereo. Plug your headphones into the
other side of the Y-adapter.
C
1/8”
Audio
-adapter
Y
Cable
B
Audio
Cable
Headphones
1/8”
-adapter
Y
Headphones
14
HOW TO CONNECT YOUR HOME STEREO
CD
VCR
Amp
LINE OUT
LINE OUT
CD
VCR
Amp
LINE OUT
LINE OUT
PHONES
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your stereo.
A
Audio Cable
B. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack beneath
the console. Plug the other end of the cable into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the wire
into the unused side of the Y-adapter. Plug the Yadapter into the LINE OUT jack on your stereo.
Note:
If your computer has a 1/8” LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
A
Audio
Cable
B. Plug one end of a 1/8” to 1/8” stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your computer. Plug your headphones or speakers into the other side of the Y-adapter.
B
B
1/8”
Y-adapter
Audio
RCA
-adapter
Y
Audio Cable
Headphones/Speakers
Cable
ire removed from
W
LINE OUT jack
15
HOW TO CONNECT YOUR VCR
AUDIO OUT
RIGHT
LEFT
VIDEO AUDIO
ANT
. IN
RF OUT
IN
OUT
CH
34
VIDEO
AUDIO
ANT. IN
RF OUT
IN
OUT
CH
3
4
Note: If your VCR has an unused
AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 15.
A. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into the AUDIO OUT jack on your VCR.
B. Plug one end of a 1/8” to RCA stereo audio cable
(available at electronics stores) into the jack
beneath the console. Plug the other end of the
cable into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR
and plug the wire into the unused side of the Yadapter. Plug the Y-adapter into the AUDIO OUT
jack on your VCR.
B
A
RCA
Y-adapter
Audio
Cable
Wire removed from
AUDIO OUT jack
Audio Cable
16
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
To use iFIT.com CDs or videocassettes, the exercise
cycle must be connected to your portable CD player,
portable stereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT YOUR CD
YER, VCR, OR COMPUTER on page 14. To pur-
PLA
chase iFIT.com CDs and videocassettes, call tollfree 1-800-735-0768.
Follow the steps below to use an iFIT.com CD or
video program.
Begin pedaling to activate the console.
1
See step 1 on page 11.
Press the play button on your CD player or
4
VCR.
moment after the play button is pressed, your
A
personal trainer will begin guiding you through
your workout. Simply follow your personal trainer’s
instructions.
The program will function in almost the same way
as a workout program (see step 3 on page 13).
However, an electronic “chirping” sound will alert
you when the resistance setting and/or the target
pace setting is about to change.
Note: If the resistance of the pedals and/or the
target pace setting does not change when a
“chirp” is heard:
• Make sure that the iFIT.com indicator is lit.
Select the iFIT.com mode.
2
When the power
is turned on, the
manual mode will
be selected. To
select the
iFIT.com mode,
press the
Program Select button repeatedly until the
iFIT.com indicator lights.
Insert the iFIT.com CD or videocassette.
3
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the console may not detect the program signals.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
Monitor your progress with the two displays.
5
See step 4 on page 11.
Measure your heart rate if desired.
6
See step 5 on page 12.
When you are finished exercising, the console
7
will automatically turn off.
See step 6 on page 12.
17
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
Our Web site at www.iFIT.com allows you to play
iFIT.com audio and video programs directly from the
internet. To use programs from our Web site, the exercise cycle must be connected to your home computer.
See HOW TO CONNECT YOUR COMPUTER on
page 15. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements will be found on our Web
site.
Follow the steps below to use a program from our
Web site.
Begin pedaling to activate the console.
1
See step 1 on page 11.
Select the iFIT.com mode.
2
When the power is
turned on, the
manual mode will
be selected. To
select the
iFIT.com mode,
press the Program
Select button repeatedly until the iFIT.com indicator lights.
Go to your computer and start an internet
3
connection.
Follow the desired links on our Web site to
5
select a program.
Read and follow the on-line instructions for using
a program.
Follow the on-line instructions to start the
6
program.
When you start the program, an on-screen countdown will begin.
Return to the exercise cycle and begin
7
pedaling.
When the on-screen countdown ends, the program will begin. The program will function in
almost the same way as a workout program (see
step 3 on page 13). However, an electronic “chirping” sound
ting and/or the target pace setting is about to
change.
Monitor your progress with the two displays.
will alert you when the resistance set-
8
See step 4 on page 11.
Measure your heart rate if desired.
9
See step 5 on page 12.
When you are finished exercising, the con-
10
sole will automatically turn off.
See step 6 on page 12.
Start your Web browser, if necessary, and go
4
to our Web site at www.iFIT.com.
18
MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the exercise
cycle regularly. The exercise cycle can be cleaned
with a soft, damp cloth. To prevent damage to the
console, keep liquids away from the console and keep
the console out of direct sunlight.
TIGHTENING THE PEDALS
For best performance, regularly tighten both pedals.
CONSOLE TROUBLESHOOTING
If the console displays flicker or darken, increase your
pedaling pace. If the console does not display your
heart rate when you use the handgrip pulse sensor,
see step 5 on page 12.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, remove the indicated M4 x 48mm Screws (20)
and M4 x 16mm Screws (21) from the Left Side
Shield (4). Using an adjustable wrench, turn the Left
Pedal (40) clockwise and remove it. Turn the left arm
of the Crank (19) so that it is pointing toward the front
of the exercise cycle, and then slide off the Left Side
Shield.
20
19
40
20
21
4
5
Locate the
Reed Switch
(44). Turn the
left arm of the
Crank (19)
until the
Magnet (74) is
aligned with
the Reed
Switch.
Loosen, but
do not
remove, the
indicated M4 x 16mm Screw (21). Slide the Reed
Switch slightly closer to or away from the Magnet.
Then, retighten the Screw. Turn the Crank for a
moment. Repeat until the console displays correct
feedback. When the Reed Switch is correctly adjusted, reattach the left side shield and the left pedal.
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is at the highest level, the
Drive Belt (68) may need to be adjusted. Refer to
HOW TO ADJUST THE REED SWITCH at the left. To
adjust the Drive Belt, the Right Side Shield (5) must
first be removed. Remove the indicated M4 x 48mm
Screws (20) from the Left Side Shield (4) and the M4
x 16mm Screws (not shown) from the Right Side
Shield. Using an adjustable wrench, turn the Right
Pedal (not shown) counterclockwise and remove it.
Next, turn the right arm of the Crank (not shown) so
that it is pointing toward the front of the exercise
cycle, and then slide off the Right Side Shield.
Next, turn the
indicated M8
Nylon Locknut
(56) until the
Drive Belt (68)
is properly
tightened.
Then, reattach
the right side
shield and the
right pedal.
74
21
44
19
68
56
19
CONDITIONING GUIDELINES
Fat Burning
WARNING:
• Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the
age of 35 or individuals with pre-existing
health problems.
• The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determining heart rate trends in general.
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recommended heart rates for fat burning, maximum fat burning, and cardiovascular (aerobic) exercise.
o burn fat effectively, you must exercise at a relative-
T
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for energy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy. If
your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest number or the middle number in your training zone as you
exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys
tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the highest number in your training zone.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in preparation for exercise.
-
o find the proper heart rate for you, first find your age
T
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age; the three numbers are your “training
zone.” The lowest number is the recommended heart
rate for fat burning; the middle number is the recommended heart rate for maximum fat burning; and the
highest number is the heart rate for aerobic exercise.
Training zone exercise, consisting of 20 to 30 minutes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training
zone for longer than 20 minutes.)
cool-down
A
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
EXERCISE FREQUENCY
o maintain or improve your condition, plan three work
T
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired.
lar and enjoyable part of your everyday life.
, with 5 to 10 minutes of stretching.
The key to success is make exercise a regu
20
This
-
-
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times. Stretches: Hamstrings, back of knees and
back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times for each leg. Stretches: Hamstrings, lower
back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3
times for each leg. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons and ankles.
1
2
3
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times
for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
5
21
PART LIST—Model No. PFEX35430 R0703A
# 1 Allen Wrench
71 2 Handgrip Pulse Sensor/Wire
72 1 Clamp
73 1 Bumper Axle
78 4 1/4” x 38mm Hex Screw
79 4 Seat Carriage Bushing
74 1 Magnet
75 2 Wheel
76 2 M10 x 60mm Button Bolt
77 1 Lower Wire Harness
80 4 M8 x 31mm Button Bolt
81 2 M4 x 21mm Screw
# 1 User’s Manual
82 2 M5 Nut
Note: “#” indicates a non-illustrated part.
Specifications are subject to change with-
out notice. See the back cover of this
manual for information about ordering
replacement parts.
36 2 M10 x 105mm Carriage Bolt
37 1 Right Pedal
38 1 Right Pedal Strap
39 2 Rear Stabilizer Endcap
40 1 Left Pedal
41 1 Left Pedal Strap
1 1 Frame
2 1 Front Stabilizer
3 1 Rear Stabilizer
4 1 Left Side Shield
5 1 Right Side Shield
6 1 Handlebar Post
Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description
42 2 Front Stabilizer Endcap
43 12 M8 x 19mm Button Bolt
44 1 Reed Switch/Wire
45 1 Control Board Bracket
46 1 Resistance Cable
47 4 M8 x 39mm Button Bolt
48 1 Crank Bearing Assembly
49 1 Idler Arm
50 1 M10 x 25mm Flat Head Bolt
7 1 Seat Rail
8 1 “C” Magnet
9 1 Console
11 1 Seat Carriage
10 2 Handle Foam
12 1 Seat
13 1 Backrest
14 1 Left Seat Handle
15 2 Handle Endcap
51 3 M6 Nut
52 3 M4 x 64mm Button Screw
53 1 M6 x 25mm Bolt
54 1 Flywheel Bearing
55 1 Control Board
56 16 M8 Nylon Locknut
57 1 M8.5 Washer
58 1 Adjustment Bracket
16 1 Upper Wire Harness
17 1 Spring
18 4 M8 Flat Washer
19 1 Pulley/Crank
20 5 M4 x 48mm Screw
21 22 M4 x 16mm Screw
22 1 Pulse Wire Harness
23 1 Seat Rail Endcap
Nylon Standoff
Flywheel/Generator
M10 Nylon Locknut
5/16” x 14mm Screw
4
1
7
3
1 Flywheel Axle671
59 1 Eyebolt
60
61
62 2 M6 x 16mm Screw
63
64
65 2 Bumper
66
asher
M6 Washer
Right Rear Side Shield
M4 W
1/4” x 16mm Hex Screw
6
1
4
4
1 Right Seat Handle
24 1 Left Rear Side Shield
25
26
27 4 M8 x 25mm Button Screw
28
29
30 1 Resistance Motor
31
“J” Bolt
68 1 Drive Belt
69 1 Bottle Holder
70 8 M8 Split Washer
Left Handlebar
1
32
33 1 Right Handlebar
34 1 Side Shield Bracket
35 2 M10 x 91mm Carriage Bolt
22
1
5
10
68
2
42
42
66
46
49
50
63
21
30
8
17
21
44
37
38
6
23
7
4
21
72
20
56
56
54
57
61
3
27
27
70
70
70
70
16
62
65
73
65
62
15
14
12
15
31
43
43
56
56
11
29
18
29
18
18
18
25
78
78
25
13
48
67
56
56
21
28
25
25
9
69
71
71
21
28
21
59
58
51
81
19
74
21
20
21
40
41
75
76
75
76
63
63
64
60
55
60
45
21
77
10
29
43
43
56
56
80
79
79
80
70
70
70
70
56
56
21
24
21
21
52
52
26
53
51
43
43
43
43
34
63
36
63
63
39
39
35
32
56
56
47
47
33
22
82
21
EXPLODED DRAWING—Model No. PFEX35430 R0703A
23
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
• The MODEL NUMBER of the product (PFEX35430)
• The NAME of the product (PROFORM
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 22)
®
C55 exercise cycle)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON authorized service center, products
used for commercial or rental purposes, or products used as store display models. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts.
limitation may not apply to you.
This warranty gives you specific legal rights.
ICON HEAL
Part No. 198902 R0703A Printed in China © 2003 ICON Health & Fitness, Inc.
TH & FITNESS, INC., 1500 S. 1000 W
Accordingly
You may also have other rights which vary from state to state.
., LOGAN, UT 84321-9813
, the above
Loading...