Proform 831299200 Owner’s Manual

Model No. 831.299200
Serial No.

The serialnumber is found in thelocation

shown below. Write the sedal number in

the space above for future reference.

PRO.FORM

Serial Number

Decal

EXERCISE

EQUIPMENT

[*ll|_l_,"l libel I_H,,;

HELPLINE!

1-800-736-6879

P O W e R l N C L I N IE

USER'S MANUAL

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ................................................................. 2

BEFORE YOU BEGIN ....................................................................... 4

ASSEMBLY ............................................................................... 5

OPERATION AND ADJUSTMENT ............................................................. 7

HOW TO FOLD AND MOVE THE TREADMILL .................................................. 10

TROUBLE-SHOOTING ..................................................................... 12

CONDITIONING GUIDELINES ............................................................... 14

ORDERING REPLACEMENT PARTS .................................................. Back Cover

FULL 90 DAY WARRANTY ........................................................... Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual. Save the
EXPLODED DRAWING and PART LIST for future reference,

IMPORTANT PRECAUTIONS

7, =Thetreadmill shou d be used only" by persons

weigh|ng 250 pounds or less. "

8. Never allow mote than one person on the

13.Nevermovethewalkingbeltwhilethepower toraise,lower,ormovethetreadmill.
isturnedoff.Donotoperatethetreadmillif

thepowercordorplugisdamaged,orifthe 18.Whenfoldingor movingthetreadmill_make

surethat thestoragelatchisfully closed.

19.Inspectandtightenallpartsofthetreadmill
everythreemonths.

14+Neverstartthetreadmillwhileyouare

standingonthewalkingbelt.Alwayshold
thehandrailswhileusingthetreadmill.

16. Never leave the treadmill unattended while described in this manual, Never remove the
it is running. Always remove the key and un- motor hood unless instructed to do so by

plug the power cord when the treadmill is an authorized service representative.
not in use, Servicing other than the procedures in this

20. Never drop or insert any object into any

opening;

maintenance and adjustment procedures

manual should be performed by an autho-

rized Service representative only.

beginning this or any exercise program, consult your physician, This

The decal shown below has been placed on your treadmill. If the
decal is missing, or if it is not legible, please call our toll-free

HELPLINE to order a free replacement decal (see the back cover
of this manual). Apply the decal in the location shown.

Note: Decal is shown at 38% of actual size•

3

BEFORE YOU BEGIN

Thank you for selecting the new PREFORM ®T35
treadmill. The T35 treadmill combines advanced tech-

nology with innovative design to let you enjoy an excel-
lent form of cardiovascular exercise in the convenience

and pdvacy of your home. And when you're not exer-
cising, the unique T35 can be folded up, requiring less

than half the floor space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill, If you have additional questions,

please call our toll-free HELPLINE at 1-800-736-6879,

Storage Latch
Handrail

Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and serial num-

ber before calling. The model number of the treadmill

is 831.299200. The serial number can be found on a
decal attached to the treadmill (see the front cover of
this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled,

Console

Water Bottle Holder

Bottle not included)

Walking

Rear Roller
Adiustment Bolts

BACK

Upright

RIGHT SIDE

Circuit

Breaker

Power

Cod

Cushioned Walking Platform

for maximum exercise comfort

Incline Leg

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials untilassembly is completed. Assembly requires the included allen wrench _

and your own phillips screwdriver _=====(Z_) •

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping c,arton. This is a normal

condition and does not affect treadmitl performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Extension Leg Screw (53)-2

1. With the help of a second person, carefully raise the
Uprights (11) until the treadmill is in the position shown.

2. Insert one of the Extension Legs (34) into the treadmill
as shown. Note: It may be helpful to tip the Uprights (11)
in the direction shown by the arrow, as you insert the

Extension Leg. Make sure that the Base Pad (40) is on

the indicated side of the Extension Leg. Attach the
Extension Leg with an Extension Leg Screw (53). Be

sure to push on the head of the Extension Leg
Screw while tightening it.

Latch\Handrail Screw (35)-6

P

/

Next, attach the other Extension Leg (34) in the same
way.

5

3. Insert one of the Handrails (1) into the tube at the upper
end of the right Upright (1I).

111

t\

4+ Align the two holes in the Handrail (1) with the two holes

in the Upright (11). Tighten two Handrail Screws (35) into
the Upright and the Handrail (1). Note: It may be neces-
sary to pull out on the sides of the Console Base (46) as
you tighten the Handrail Screws.

Attach the other Handrail to the left Upright (not shown)

as described above.

5. Attach the Storage Latch (14) to the left Upright (11) with
two Latch Screws (35). Be careful not to overtighten

the Latch Screws.

4

46\

35 -q

\ '"_,---35

11

Bottom View

5

14

6. Make sure that all parts are tightened befo.re you use the treadmill. Keep the included allen wrench in a

secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet,
place a mat under the treadmill.

6