Proform 831297644 Owner’s Manual
PRO.FORM"
6E/ARS
Model No. 831.297644
Serial No.
The serialnumbercanbefoundinthe
locationshownbelow.Writetheserial
numberinMe spaceabove.
Ex _-- R C i S t=-
EO U I P r_l _=" N T
HELPLINE!
1-800-736-6879
USER'S MANUAL
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
Pi O:FORM"
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS ................
BEFORE YOU BEGIN ......................
ASSEM'BLY ... ; ..........................
OPERATION AND ADJUSTMENT ............
• = ..° 6oo1,=oo.o• • =° • .° ,,,,totQ .... ,,,•
• •°•.°. •• • ...°. • .. •••.•• • • o..,.°o°o.oo.
.°..•.o . •
• • •••••.*.••.ooo°•Q
• *•o°o•.• •
HOW TO FOLD AND MOVE THE TREADMILL ..
TROUBLE-SHOOTING AND STORAGE ........
oo,.•.°.o•_°°.•**•oo °•o•••oo•.o.°o o.•
CONDITIONING GUIDELINES ... .. - 14._o •o°oo*•_°°oto*,.=..•..oQ-°-o--ooo••,o°-°--•oo-oo-,.•o-°
ORDERING REPLACEMENT PARTS .................................................. Back Cover
FULL 90 DAY WARRANTY ............. Back Cover• o.•..oo_ t•* ... • =*,Dec ========================
oo••leoo.o_
••o•o•.o,°7
......... 10
......... 12
•. Note: An EXPLODED DRAWING and a PART LIST are attached to the center of this manual. S,",vethe
EXPLODED DRAWING and PART LIST for future reference.
PRECAUTIONS-:" :_'"..
INSTRUCTIONS_
BEFORE YOU BEGIN
Thank you for selectingthe uniquePROFORM ° 580si
treadmill:The 580si treadmill blends advanced technol-
ogy with innovative stylingto let you enjoy an excellent
form ofcardiovascular exemise in the convenience and
privacyof your home. The 580si offers an impressive
array of features to make yourworkouts more enjoy-
able and effective. Andwhen you're notexercising, the
580si can be folded up, requiringless than half the floor
space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
-- Towel Rack
Water
Bottle*
Holder
Tray
Storage Latch_
please call our toll-free HELPLINE at 1-800-736-6879,
Monday through Saturday, 7 a.m, until7 p.m. Central
Time (excluding holidays). To help us assistyou,
please note the productmodel number and sedal num-
ber before calling. The model number of the treadmill
is831.297644. The sedal number can be found on a
decal attached tothe treadmill (see the front cover of
this manual for the location),
Before reading further, please review the drawing
below and familiarize yourself with the pads that are
labeled.
Console
*A Water Bottle Is not included
Foot Rails
Padded Walking Platform
for maximum comfort
BACK
Adjustment Bolt
Handrails
Circuit Breaker
On/Off
Switch
FRONT
RIGHT SIDE
4
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dis-
pose of the packing materials until assembly is completed. Tools required for assembly: The included allen
wrench _ and your phillips screwdriver _ and two adjustable wrenches _;;=:_::2_ •
1. See drawing 1A.Attach six Base Pads (95) to the bottom 1A i _ 95 1B
of the Base (73) in the indicated locations (see drawing _ , 95 _..._ _F._t /1B). Note: One additional Base Pad will be used in as- _',,.J t , _ \
sembly step 6, and one extra Base Pad is included.
2. Firmly hold the Uprights (6, 88) as shown. Raise the
Uprights until the Base (73) and the front Wheels (66)
are resting on the floor.
3. Loosen the Crossbar Bolts (1) in the ends of the Console
Crossbar (9). Pivot the Console (10) to the angle shown.
Look under the Left and Right Crossbar Brackets (3, 36)
and Fu_d,.thetwo small holes in each end of the Console
Crossbar (9). Tighten Crossbar Screws (84) intoall four
holes.
: ::;_>g5
2
i
Rotate the Console (10) upward until itstops. Using the
7/32" end of the Allen Wrench (83), tighten the Crossbar
Bolts (1) in the ends of the Console Crossbar (9).
4. Next, the treadmill should be raised tOthe storage posi-
tion. Hold the treadmill with your hands in the locations
shown at the righL To decrease the possibility of In-
Jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your
legs rather than your back, Raise the treadmill about
halfway to the vertical position.
84 _%.V::_-_/1
_/"._ >-'-..-,.3/ 83
,11 //-/j
5. Move your righthand to the positionshown at the right,
and hold the treadmill firmly. Using your lefthand, lift the
storage latch. Raise the treadmill until the locking piD
snaps into the storage latch. Make sure that the locking
pin Is inside the storage latch, and that the storage
latch is fully closed.
5.
See drawing 6B. Attach a Base Pad (95) to the bottom of
the Stabilizer Plate (98) in the indicated location.
See drawing 6A. Stand behind the treadmill. Hold the Left
Crossbar Bracket (3) and the Right Crossbar Bracket (not
shown). Place one foot on the Base (73) in the indicated
location. Tip the treadmill back slightly.While the tread-
millis held in this I:_osftion,a second person shouldslide
the Stabilizer Plate (98) onto the Base (see drawing 6C).
Keeping your foot on the Base, carefully tip the treadmill
up until it is resting on the Base. Make sure thatthe
Stabilizer Plate (98) stays on the Base.
See drawing 6C. Attach the Stabilizer Plate (98) to the
Base (73) with a Stabilizer Plate Bolt (91), two Stabilizer
Plate Washers (70), and the Stabilizer Plate Nut (71) as
shown.
_torage Latch _
6A
3
6B
95---_
.
Refer to assembly drawing 5 at the top of this page. Hold
the upper end of the treadmillwithyour righthand as
shown. Using your left hand, liftthe storage latch. Pivot
the treadmill slightly untilthe locking pin isoutof the stor-
age latch.
Hold the treadmill firmly with bothhands, and lower the
treadmill to the floor. To decrease the possibility of in-
Jury, bend your legs and keep your back straight.
8. Remove the paper backing from the Adhesive Clip (26).
Press the Adhesive Clip onto the Frame (49) In the Indi-
cated location. Press the Allen Wrench (83) intothe
Adhesive Clip. The use of the Allen Wrench is described
on page 12.
6c i<
!"_ 71 70 . 73
_ 98
7
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a
mat under the treadmill.
Loading...