Proform 831297362 Owner’s Manual

PRO.FORM"

CROSS

SEARS

Model No. 831.297362

Sedal No.

De _ num_r _ _ found_ _e
I_:a_n _ _low. W_e Me se_

num_r m_e _ace a_e.

Decal

EXERCISe"

EO u i F=, M _- NT

K_,,li am _IB I Eel _ _1

H F---LPLI N I_!

1-800-736-6879

USER'S MANUAL

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES. IL f:;017_

CROSS

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ....................................... .. . . . . . ....

BEFORE YOU BEGIN ........................................................

ASSEMBLY ................. ...............................................

OPERATION AND ADJUSTMENT" . .............................................

HOW TO FOLD AND MOVE THE TREADMILL ....................................

TROUBLE-SHOOTING .......................................................

CONDITIONING GUIDELINES .................................................

ORDERING REPLACEMENT PARTS ...................................... • . ... . . .. .. . BackCover

FULL 90 DAY WARRANTY ......................................................... .. Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached to the center of this manual. Save the

EXPLODED DRAWING and PART LIST for future reference.

,,=,..,,°,°°°°3

B4°o°ooo**ooot4

,o,°l.oo.Q=_to5

oo°,o°°°°°°_°.7

............. 10

............. 12

............. 14

2

IMPORTANT PRECAIJTION_

RNING: toi_uc_thor!skofburns;fire,electrlc_shock:0r

before operating the b'_admill

BEFORE YOU BEGIN

Thank you for selecting the unique PROFORM e
CROSSWALK si treadmill.The CROSSWALK sitread-

mill blends advanced technology with innovative styling
to provide you with an excellent form of cardiovascular

exercise in the convenience and privacy of your home.
The CROSSWALK si offers an impressive army of fea-

tures designed to make your workouts more enjoyable
end effective. And when you're not exercising, the

unique CROSSWALK sl can be folded up, requiring
less than half the floorspace of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have additional questions,

Towel Water

Rack Bottle*

Holder

I

Storage Latch

please call our toll-free HELPLINE at 1-800-736-6879,
Monday through Saturday, 7 a.m. until 7 p.m. Central

Time (excluding holidays}.To help us assist you,

please note the productmodel number and serial num-
ber before calling. The model number of the treadmill

is 831.297362. The serial number can be found on a
decal attached to the treadmill (see the front cover of

this manual for the location).

Before reading further, please review the drawing
below and familiarize yourself with the parts that are

labeled.

,Arms

Console

Tray

*Water Bottle is not included.

Foot Rails

Walkin

Control

Resistance

Knobs

FRONT Power Cord

Cushioned Walking
Platform for maximum

exercise comfort

RIGHT SiDE

Rear Roller
Adjustment Bolt BACK

4

'Incline Leg

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared crea and remove all packing materials. Do not dis-
pose of the packing materials untilassembly iscompleted. Tools required for assembly: The Included allen

wrench _ and your philtips screwdriver .,-,=====,C_) and two adjustable wrenches _.

1. Attach six Base Pads (95) to the bottom of the Base (73)
in the indicated locations (see the inset drawing). Note:

One additional Base Pad will be used in assembly step 6,
and one extra Base Pad is included.

2. Firmly hold the Uprights (6, 88) as shown. Raise the
Uprights until the Base (73) and the frontWheels (58)

are resting on the floor.

1 g5 1

l .7z/

3. Loosen the Crossbar Bolts (1) in the ends of the Console
Crossbar (9). Pivot the Console (10) to the angle shown.

Look under the Left and Right Crossbar Brackets (3, 36)
and fin_'ie two small holes in each end of the Console

Crossbar (9). Tighten Crossbar Screws (104) into all four
holes.

Rotate the Console (10) upward until it stops. Using the
7/32" end of the Allen Wrench (83)° tighten the Crossbar

Bolts (1) in the ends of the Console Crossbar (9).

4. Next, the treadmill should be raised to the storage posi-

tion. Hold the treadmill with your hands in the locations
shown at the dght. To decrease the possibility of In-

Jury, bend your legs and keep your back straight. As

you raise the treadmill, make sure to lift with your
legs rather than your back. Raise the treadmill about
halfway to the vertical position.

83

5

5. Move your right hand to the position shown at the right,
and hold the treadmill firmly. Using your left hand, liftthe

Storage Latch (120). Raise the treadmill untilthe locking
pin snaps into the Storage Latch. Make sure that the
locking plnls Inside the Storage Latch, and that the
Storage Latch is fully closed.

.

See drawing 6B. Attach a Base Pad (95) to the bottomof
the Stabilizer Plate (94) in the Indicated location.

See drawing 6A. Stand behind the treadmill. Hold the Left
Crossbar Bracket (3) and the Right Crossbar Bracket (not

shown). Place one foot on th.eBase (73) in the indicated
Iooation.Tip the treadmill back slightly. While:the treadmill
is held in this position, a second person shouldslide the

Stabilizer Plate (94) onto the Base (see drawing 6C).
Keeping your foot on the Base, carefully tip the treadmill
up until it is resting on the Base. Make sure that the
Stabilizer Plate (94) stays on the Base.

See drawing 6C. Attach the Stabilizer Plate (94) tothe
Base (73) with a Stabilizer Plate Bolt (71), two Stabilizer

Plate Washers (66), and the Stabilizer Plate Nut (60) as

shown.

5

6A"

120

6B

3 .94

.

Refer to assembly drawing 5 at the top of thispage. Hold
the upper end of the treadmill with your right hand as

shown. Using your left hand, lift the storage latch. Pivot

the treadmill slightly until the locking pin is out of the stor-

age latch.
Hold the treadmill firmly with both hands, and lower the

treadmill to the floor. To decrease the possibility of In-
Jury, bend your legs and keep your back straight.

8. Remove the paper backing from the Adhesive Clip (26).
Press the Adhesive Clip onto the Frame (84) in the indi-

cated location. Press the Allen Wrench (57) intothe
Adhesive Clip. The use ofthe Allen Wrench is described
on page 12.

.3 _"/J 60 66,._

7

8

Make sure that all parts are tightened before you use the

treadmill. Note; To protect the floor or carpet, place a
mat under the treadmill.

6