Proform 831297153 Owner’s Manual
e x p a n s e
IIIII III IIIII
SEARS
Model No. 831.297153
Serial No.
The serial number is found inthe location
shown below. Write the sedal number in
the space above for future reference.
Serial Number Decal
Ex ___ R C I .,_= _--
EOU I PM ENT
_o] lllJ I: L'! l/ie] I_1
H ELPLI. N E !
1-800-736-6879
USER'S MANUAL
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS ...... . .......................................................... 2
BEFORE YOU BEGIN ....................................................................... 4
ASSEMBLY ............................................................................... 5
OPERATION AND ADJUSTMENT ............................................................. 7
HOW TO FOLD AND MOVE THE TREADMILL .................................................. 10
TROUBLE-SHOOTING ..................................................................... 12
CONDITIONING GUIDELINES ............................................................... 14
ORDERING REPLACEMENT PARTS .................................................. Back Cover
FULL 90 DAY WARRANTY ........................................................... Back Cover
Note: An EXPLODED DRAWING and a PART LIST are attached to the center of this manual. Save the
EXPLODED DRAWING and PART LIST for future reference.
IMPORTANT PRECAUTIONS
The decal shown has been placed on
your treadmill. If the decal Is missing,
or if it is not legible, please call our toll-
free HELPLINE to order a free replace-
ment decal (see the back cover of this
manual). Apply the decal in the location
shown.
,_WARNING!
• Never allow children
to play on or around
treadmill.
• Storage latch must be
fully engaged before
treadmill is moved or
stored.
I'
Q Q
©
® (D
II,
1
II
3
BEFORE YOU BEGIN
Thank you for selecting the SEARS LIFESTYLEFP
EXPANSE 550 treadmill. The EXPANSE 550 treadmill
blends advanced technology with innovative design to
let you enjoy an excellent form of cardiovascular exer-
cise in the convenience and privacy of your home.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our toll-free HELPLINE at 1-800-736-6879,
Monday through Saturday, 7 a.m. until 7 p.m. Central
Speed Control
Time (excluding holidays). To help us assist you,
please note the product model number and serial num-
ber before calling. The model number of the treadmill
is 831.297153. The serial number can be found on a
decal attached to the treadmill (see the front cover of
this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Holder
(Water Bottle is not
included)
Circuit Breaker _\
Power Cord
LEFT SIDE
Cushioned Walking
Platform for maximum
exercise comfort
"_-Uprights .I-
incline
Belt
Foot Rails
=tearRoller
Adjustment Bolt
BACK
4
ASSEMBLY
CAUTION: Carefully read and follow step I below before removing the restraining tie. If the restraining tie
is removed prematurely, serious bodily injury may result. Assembly requires two people. Set the treadmill in
a cleared area and remove the packing materials, except for the restraining tie. Do not dispose of the packing
materials untilassembly is completed. Assembly requires the Included allen wrench I and a phillips screw-
driver ,============[_(not Included).
Slide the Left Upright (1) onto the left side of the Base
(55). It may be necessary to firmly push down on the
Left Upright until It Is fully seated on the Base.
Remove the restraining tie from the Base (55).
Using the allen wrench, tighten two of the four Upright
Screws (50) intothe Left Upright (1) and the Base (55).
2. Slide the Right Upright (43) onto the right side of the Base
(55). It may be necessary to firmly push down on the
Right Upright until It Is fully seated on the Base. Be
careful not to pinch the Wire Harness (19) between
the Right Upright and the Base.
50
55
Restraining Tie
Using the allen wrench, tighten two Upright Screws (50)
intothe Right Upright (43) and the Base (55).
Remove the wire ties (not shown) attaching the Console
Base (9) to the Right Upright (43).
3. Set the Console Base (9) on the Left and Right Uprights
(1,43).
While one person carefully feeds any slack Wire Hamess
(19) down into the Right Upright (43), a second person
should carefully pull the slack Wire Harness from the
lower end of the Right Upright.
j 43
5O
Attach the Console Base (9) with four Console
Screws (7).
7
5
4. With the help of a second person, carefully lower the Left
and Right Uprights (1,43) until the handrails are resting
on the floor.
.
Attach six Base Pads (51) to the bottom of the Base (55)
in the indicated locations. Note: One extra Base Pad
may be included.
See drawing 4 above. With the help of a second person,
raise the Left and Right Uprights (1,43) until the Base
(55) is resting flat on the floor.
Before moving the treadmill, see HOW TO MOVE THE
TREADMILL on page 10.
43
Handrails
55
Y
51l ""
6. Place the Wire Hamess (19) around the inner side of the
Base (55) as shown. Make sure that the Wire Harness is
out of the way. DO NOT feed the slack Wire Harness
into the Belly Pan (48). The Wire Hamess may be dam-
aged if it is inside the Belly Pan.
7. Remove the backing from the Adhesive Clip (16). Press
the Adhesive Clip onto the Rear Roller Cover (86) in the
indicated location. Press the Allen Wrench (62) intothe
Adhesive Clip.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a
mat under the treadmill
86
55
48
;;;L---16
\62
Loading...