Proform 831295235 Owner’s Manual

Model No. 831.295232
Serial No.

• Assembly
o Operation

Maintenance

(Z.3ooling

Serial Number

Decal

E3ree__

TREADMILL

User's Manual

= Part List and Drawing

Sears, Roebuck and Co., Hoffman Estates, IL 60179

_yw

Cooling

TABLE OF CONTENTS

iMPORTANT PRECAUTIONS ................................................................ 3

BEFORE YOU BEGIN ...................................................................... 5

ASSEMBLY ............................................................................... 6

OPERATION AND ADJUSTMENT ............................................................ 10

HOW TO FOLD AND MOVE THE TREADMILL .................................................. 13

TROUBLESHOOTING ..................................................................... 15

CONDiTIONiNG GUiDELiNES ............................................................... 17

ORDERING REPLACEMENT PARTS .................................................. Back Cover

FULL 90 DAY WARRANTY .......................................................... Back Cover

Note: An EXPLODED DRAWING and a PART LiST are attached in the center of this manual.

iMPORTANT PRECAUTIONS

The decals shown have been placed on your treadmill, if a decal is missing, or if it
is not legible, please call toll=free 1=888=533=1333 and order a free replacement decal

(see the front cover of this manual). Apply the decal in the location shown. Note:

The decals are not shown at actual size.

Protect yourself and

others from risk of serious

injury. Read the user's

manual and :

side rails when

,Stand only on the

starting or stopping
treadmill,

•Change speed in
small increments.

,Hold handrails to

prevent falling, and
always wear the

safety clip while
operating treadmill,

'Stop if you feel faint,

dizzy, or short of
breath.

• Fully engage storage
latch before tread-
mill is moved or

stored.

,Reduce incline to its
lowest level before

folding treadmill il_to
storage position.

not h_ use.

•Keep clothlng,
fingers, and hair

away from moving
belt.

.Never try to adiust

or fix the belt while
it is moving,

•Always wear
athletic shoes while

operating treadmill.

4

BEFORE YOU BEGIN

Thank you for selecting the new PROFORM _>495 Pi
treadmill. The PROFORM 495 Pi treadmill combines ad-

vanced technology with innovative design to help you
get the most from your exercise in the convenience of
your home. And when you're not exercising, the PRO-

FORM 495 Pi treadmill can be folded up, requiring less
than half the floor space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have questions after reading

Accessory Tray

Handrail

this manual, call 1-800-4-MY-HOME _(1-800-469-4663).
To help us assist you, please note the product model

number and serial number before calling. The model
number of the treadmill is 831.295232. The serial num-

ber can be found on a decal attached to the treadmill
(see the front cover of this manual for the location).

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

Fan

Key/Clip

Upright

Storage Latch

Walking Belt

Foot Rail --

BACK

Rear Roliel

Adjustment Bolts

Reset/Off

Circuit Breaker

\

__ Cushioned Walking Platform

for maximum exercise comfort

RIGHT SiDE

ASSEMBLY

Assembly requires two persons. Set the treadmill ina cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches ) and your own phillips screwdriver ([_Z ======_,
rubber mallet c::z:z:z:_, and adjustable wrench _ .

For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first
check to see if it has been pre-assembled, if a part is missing, call toll=free 1=888=533=1333.

Silver Ground

Wheel Nut (32)-2

3/4" Screw (2)-6

1. Make sure that the power cord is unplugged.

With the help of another person, carefully raise the

Uprights (69) to the vertical position, insert one of the
Extension Legs (63) into the treadmill as shown. (Note: It

may be helpful to tip the Uprights as you insert the

Extension Leg.) Make sure that the Base Pad (61) is

under the Extension Leg.

Screw (75)-1

1" Tek Screw (39)-6

1/2" Screw (48)-6

2" Bolt (64)-2

Handrail Bolt (37)-4

63

insert the other Extension Leg (63) in the same way.

61

HentifytheRightHandrail(72),whichhasalargeholein
theleftside.FeedtheUprightWire(42)intotheholein
thebottomoftheRightHandrailandoutofthelargehole
intheside.Note:Itmaybehelpfultouseneedlenosepli-
erstopulltheWireHarnessoutofthehole.

71

AttachtheupperendoftheRightHandrail(72)witha

HandrailBolt(37).DonottightentheBoltyet.
AttachtheupperendoftheLeftHandrail(71)asde-

scribedabove.DonottightentheBoltyet.Note:There
isnotawireharnessontheleftside.

Withthehelpofanotherperson,carefullylowerthe

Uprights(69)asshown.Note:Itmaybehelpfultoplace
onefootononeoftheExtensionLegs(63)asyoutipthe

Uprights.MakesurethattheExtensionLegsremain

in the Uprights.

Align the lower end of the Right Handrail (72) with the
hole in the Extension Leg (63). Attach the Right Handrail

with a Handrail Bolt (37). Attach the lower end of the Left

Handrail (71) in the same manner.

Hole

L_

\
\

\
\

71

37