ProForm 480 Pi, 831.291600 User Manual

Model No. 831.291600
Serial No.
Serial Number
Decal
EXERCISE
E 0 u I P IVl E N T
©
USER'S MANUAL
[#l [IJ I|i lIKell#l,_l_
1-800-736-6879
SEARS, ROEBUCK AND CO.
HOFFMAN ESTATES, IL 60179
www.proform.com
new products, prizes,
fitness tips, and much more!
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS ................................................................. 2
BEFORE YOU BEGIN ....................................................................... 4
ASSEMBLY ............................................................................... 5
OPERATION AND ADJUSTMENT ............................................................. 7
HOW TO FOLD AND MOVE THE TREADMILL .................................................. 10
TROUBLE-SHOOTING ..................................................................... 12
CONDITIONING GUIDELINES ............................................................... 14
ORDERING REPLACEMENT PARTS .................................................. Back Cover
FULL 90-DAY WARRANTY ........................................................... Back Cover
Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.
IMPORTANT PRECAUTIONS
The decals shown have been placed on your treadmill. If a decal is missing, or if it is not legible, please call our toll-free HELPLINE to order a free replacement decal (see the front cover of this manual). Apply the decal in the location shown.
Note: The decal is shown at 38% of actual size.
BEFORE YOU BEGIN
Congratulations for selecting the new PROFORM ®480 Pi treadmill. The 480 Pitreadmill combines advanced
technology with innovative design to help you get the most from your exercise in the convenience and pri-
vacy of your home. And when you're not exercising, the unique 480 Pi can be folded up, requiring less than half
the floor space of other treadmills.
For your benefit, read this manual carefully before using the treadmill. If you have additional questions,
please call our toll-free HELPLINE at 1-800-736-6879,
Handrail
Key/Clip
Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and serial num- ber before calling. The model number of the treadmill is 831.291600. The serial number can be found on a
decal attached to the treadmill (see the front cover of this manual for the location).
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.
Console Water Bottle Holder
(Bottle not included)
Storage Latch
Walking Belt
Rear Roller Adjustment Bolts
BACK
Upright
RIGHT SIDE
Circuit
Breaker
Power
Cord
Cushioned Walking Platform
for maximum exercise comfort
Leg
4
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench [_
and your own phillips screwdriver _ and wire cutters _?_. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
_J
Handrail Bolt (91)-2
Extension Leg Screw/Handrail Screw (53)-4
1. Carefully raise the Uprights (11) until the treadmill is in the position shown.
Insert one of the Extension Legs (34) into the treadmill
as shown. (Note: It may be helpful to tip the Uprights [11] in the direction shown by the arrow as you insert
the Extension Leg.) Make sure that the Base Pad (40) is on the indicated side of the Extension Leg. Attach the
Extension Leg with an Extension Leg Screw (53). Be
sure to push on the head of the Extension Leg Screw while tightening it.
Attach the other Extension Leg (34) in the same way.
2. Slide a Handrail Cap (41) onto one of the Handrails (1) as shown. Insert the Handrail (1) into the tube at the top of the left Upright (11). Finger tighten a Handrail Bolt (91) at an angle (see the inset drawing) into the Upright and the Handrail. Make sure that the Handrail Cap (41) is on the Upright.
Console Screw (88)-6
D
Small Screw (13)-2
Press the top of the Handrail (1) into the Upright (11). Align the hole in the Handrail with the hole in the Upright, and tighten a Handrail Screw (53) into the Upright and the
Handrail. Tighten the Handrail Bolt.
Attach the other Handrail (1) as described above.
3. Threadthetwoincludedwiretiesthroughtheindicated holesinthetubeonrightsideoftheUpright(11).
Lookintothetuberightupright(88)andmakesurethe
Wires(21)havebeensecuredtothesideshown.Tighten thewiretiesandcutofftheexcessfromtheends.
Tie
11
Ties
4. PlacetheConsoleBase(46)onthepostsontheUpright.
Makealoopwiththeindicatedplastictiesandinsertthe
twoWires(21)throughtheloops.Pulloutonlyenoughof thetwoWirestoconnectthemtotheconnectorsinthe
ConsoleBase.PlugtheWiresfullyintotheconnectors. Tightentheloopsandcutofftheexcessplastictie.
WARNING:Donotdisconnector connecttheWires whilethetreadmillpowercordis pluggedin.
Refertodrawing4b.ThreadsixConsoleScrews(88)into theUprights(11)andtheConsoleBase(46).Afterallsix ConsoleScrewshavebeenstarted,tightentheScrews untiltheyaresnug;donotovertightentheScrews.
5. AttachtheStorageLatch(14)totheleftUpright(11)with twoSmallScrews(13).Becarefulnotto overtighten
theLatchScrews.
4a 46
21
88
88 88
46
11
...._13
--11
6. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet, place a mat under the treadmill.
Loading...
+ 13 hidden pages