ProForm 831.290880 User Manual
USER'S MANUAL
Serial Number
Decal
ª
¨
Patent Pending
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual for future reference.
Write the serial number in the space
above for future reference.
Serial Number Decal (under console)
Model No. 831.290880
Serial No.
Patent Pending
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO USE THE AIR WALKER XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
STORAGE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
1. Read all instructions in this manual before
using the AIR WALKER XT. Use the AIR
WALKER XT only as described.
2. It is the responsibility of the owner to ensure
that all users of the AIR WALKER XT are
informed of all warnings and precautions.
3. Place the AIR WALKER XT on a level surface.
Cover the floor beneath the AIR WALKER XT
to protect the floor or carpet.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Be sure that there are no persons or obstacles in front of or behind the AIR WALKER XT.
6. Keep children under 12 and pets away from
the AIR WALKER XT at all times.
7. The AIR WALKER XT should not be used by
persons weighing more than 250 pounds.
8. Do not wear loose clothing that could
become caught on the AIR WALKER XT.
9. Always wear athletic shoes for foot
protection when using the AIR WALKER XT.
10. Keep hands and feet away from moving parts.
11. When mounting or dismounting the AIR
WALKER XT, hold the frame beside the hip
pad and center your weight over the pedals.
12. When using the AIR WALKER XT, always hold
the handles or place your hands on the frame
beside the hip pad.
13. When using the independent mode, hold the
frame beside the hip pad and be careful to
control your movement and maintain your
balance at all times.
14. Do not adjust the resistance while you are
standing on the AIR WALKER XT. Always
dismount the AIR WALKER XT before
adjusting the resistance.
15. The resistance cylinders become very hot
during use. Allow the resistance cylinders to
cool before touching them. When adjusting
the resistance, touch only the resistance dials.
16. If you feel faint, dizzy, or short of breath while
exercising, stop immediately and begin
cooling down.
17. The AIR WALKER XT is intended for home
use only. Do not use the AIR WALKER XT in
a commercial, rental, or institutional setting.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the AIR WALKER XT.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. SEARS assumes no responsibility for personal injury or property damage
sustained by or through the use of this product.
3
BEFORE YOU BEGIN
Handle
Resistance Dial
Leg
Electronic Monitor
Hip Pad
Pedal
Link Arm
Resistance Cylinder
Upright
Lock Knob
Stop
Frame
Congratulations for purchasing the new PROFORM
¨
AIR WALKER XT. The AIR WALKER XT combines
advanced engineering with innovative styling to let you
enjoy effective, no-impact, total body workouts in the
convenience and privacy of your own home.
For your benefit, read this manual carefully before
using the AIR WALKER XT. If you have additional
questions, please call our toll-free HELPLINE at 1-800736-6879, Monday through Saturday, 7 a.m. until 7
p.m. Central Time (excluding holidays). To help us
assist you, please note the product model number and
serial number before calling. The model number is
831.290880. The serial number can be found on a
decal attached to the AIR WALKER XT (see the front
cover of this manual for the location of the decal).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Place all parts of the AIR WALKER XT in a cleared area and remove the packing materials. Do not dispose of
the packing materials until assembly is completed. Read through all assembly steps before you begin.
Assembly requires a phillips screwdriver and two adjustable wrenches (not
included).
4
ASSEMBLY
2. Make sure that there is a Bronze Bushing (16) in
the lower end of the Left Link Arm (11). Slide the
Left Link Arm onto the indicated pin on the Rocker
Arm (9). If necessary, pivot the Rocker Arm
slightly. Next, slide the 3/8Ó Flat Washer (39) onto
the pin and tighten the 3/8Ó Nylon Locknut (43)
onto the pin.
3. The Electronic Monitor (47) requires one ÒAAAÓ
battery (included). Firmly press on the battery
cover and slide it upward to remove it from the
Monitor. Insert the battery into the Monitor. Make
sure that the battery is turned so the negative
end (marked ÒÐÓ) is touching the spring.
Reattach the battery cover.
1. Lay the AIR WALKER XT on the floor. Attach the
Left Pedal Cover (25) to the Left Leg (3) with four
#8 x 1/2Ó Screws (45).
Attach the Right Pedal Cover (27) to the Right Leg
(4) in the same manner.
Raise the AIR WALKER XT and unfold it to the
position shown at the right. Make sure that the
Uprights (5, 6) are fully extended and are
resting against the stops.
Fig. 2
Fig. 3
47
Battery
Cover
Battery
43
11
16
39
Fig. 1
27
Stop
3
45
5
6
4
25
9
Loading...