Model No. 831.270000
Serial No.
USER'S MANUAL
Patent Pending
Serial Number Decal (on frame)
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
The serial number is found in the location shown below. Write the serial number in the space above for reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO OPERATE THE MASSAGE CHAIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
MAINTENANCE AND STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
FULL 90-DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2
3
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or serious injury to persons,
read all important precautions before using the massage chair.
READ AND FOLLOW ALL INSTRUCTIONS
1. Read all precautions and instructions in this
manual before using the massage chair.
2. It is the responsibility of the owner to ensure
that all users of the massage chair are
adequately informed of all precautions.
DANGER
To reduce the risk of electric shock:
3. Always turn off the hand control and unplug
the power cord from the outlet immediately
after using and before cleaning the massage
chair.
WARNING
To reduce the risk of burns, fire, electric shock,
or injury to persons:
4. Never leave the massage chair unattended
while it is plugged in.
5. Do not use the massage chair under a
blanket or pillow. Excessive heating can
occur and cause fire, electric shock, or injury
to persons.
6. Close supervision is necessary when the
massage chair is used by, on, or near invalids
or disabled persons.
7. Keep children away from the massage chair.
8. Use the massage chair only for its intended
use as described in this manual.
9. Never operate the massage chair if it is not
working properly, if it is damaged, or if the
power cord or plug is damaged. If any of
these conditions exists, call the toll-free
telephone number on the front of this manual.
10. Keep the power cord away from heated
surfaces.
11. Use the massage chair indoors. Never use
the massage chair outdoors.
12. The massage chair is intended for home use
only. Do not use the massage chair in a
commercial, rental, or institutional setting.
DANGER
13. Keep pins and other sharp objects away from
the massage chair.
14. Carefully examine the massage chair before
each use. If there are any signs of deterioration, call the toll-free telephone number on
the front of this manual.
15. Keep the massage chair dry, away from water
and moisture.
WARNING
16. Temperatures sufficiently high to cause
burns may occur. Do not use on an infant
or invalid or on a sleeping or unconscious
person. Do not use on insensitive skin or on
a person with poor blood circulation. Check
the skin in contact with the heated area of
the massage chair frequently to reduce the
risk of blistering.
17. Do not crush the massage chair. Avoid sharp
folds in the massage pad.
WARNING: Read all instructions before using this product. SEARS assumes no responsi-
bility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
Congratulations for selecting the PROFORM
¨
RESTORATION 2-IN-1 massage chair. The
innovative RESTORATION 2-IN-1 massage chair is
designed to melt away stressÑrelaxing you,
stimulating circulation, and reducing muscle fatigueÑ
any time you choose. Using the convenient hand
control, you can choose upper-back, lower-back, or
thigh massage, wave or pulse motion, or the built-in
heater. You can even remove the massage pad from
the frame and use it on the floor or a bed. And when
the massage chair is not in use, it can be folded for
compact storage, so you can take it wherever there is
an electrical outlet!
For your safety and benefit, read this manual
carefully before using the massage chair. If you
have additional questions, please call our toll-free
HELPLINE at 1-800-736-6879, Monday through
Saturday, 7 a.m. until 7 p.m. Central Time (excluding
holidays). Before calling, please note the product
model number and serial number. The model number
is 831.270000. The serial number can be found on a
decal attached to the massage chair (see the front
cover of this manual for the location).
Before assembling the massage chair, please look at
the drawing below and familiarize yourself with the
parts that are labeled.
4
BEFORE YOU BEGIN
Massage Pad
Power Cord
Frame
Hand Control
Hand Control Holder
Headrest
Armrest
5
Place all parts of the massage chair in a cleared area and remove the packing materials. Do not dispose of the
packing materials until the massage chair is fully assembled. For your convenience, the massage chair can be
assembled in three simple steps. An adjustable wrench (not included) is required.
1. Unfold the massage chair to the position shown at the
right. Make sure that the Massage Pad (12) is correctly
positioned on the Seat Frame (10) and the Back Frame
(15).
Attach one of the Arms (9) to the Seat Frame (10) with two
5/16Ó x 2Ó Carriage Bolts (1), two 5/16Ó Washers (4), and
two 5/16Ó Nylon Locknuts (5) as shown.
Attach the other Arm (9) to the Seat Frame (10) in the
same manner.
2. Connect the wire harness on the Hand Control (14) to the
wire harness on the Massage Pad (12). Refer to the inset
drawing. Make sure that the indicated latch on the wire
harness is engaged. If the wire harnesses do not fit
together easily, turn them. Do not force the wire
harnesses together.
3. Plug the Power Cord (16) into the jack on the Massage
Pad (12).
4. Make sure that all parts of the massage chair are properly tightened.
ASSEMBLY
1
1
5
10
4
4
12
15
9
9
1
14
Latch
12
2
12
3
16
6
DIAGRAM OF THE HAND CONTROL
A. Power IndicatorÑThis indicator lights when the
power is on.
B. Power SwitchÑThis switch turns the power on
and off.
C. Mode IndicatorsÑThese indicators show which
mode is selected.
D. Upper Back, Lower Back, and Thigh ButtonsÑ
When the Manual mode is selected, these buttons
activate the three massage zones.
E. Heater ButtonÑThis button turns the built-in
heater on and off.
F. Heater IndicatorÑThis indicator lights when the
built-in heater is on.
G. Mode ButtonÑThis button selects the four modes.
H. Speed ButtonsÑThese buttons control the speed
of the massage action when one of the three
automatic modes is selected.
I. Intensity ButtonsÑThese buttons control the
intensity of the massage action in all modes.
FEATURES OF THE MASSAGE CHAIR
The convenient hand control lets you customize the
type of massage you get each time you use the
massage chair. With the manual mode selected, you
can choose any combination of upper-back, lowerback, and thigh massage action. If desired, the built-in
heater can be turned on. The control also offers three
automatic modes: Full Body Wave, Full Body Pulse,
and Upper Body Wave. Whichever mode you choose,
the speed and intensity of the massage action can be
adjusted to the level thatÕs just right for you.
HOW TO USE THE HAND CONTROL
To use the
massage chair,
first plug the transformer on the
power cord into a
120-volt outlet.
Keep the power
cord away from
walkways and
heated
surfaces.
Next, sit on the massage chair and relax. Follow the
steps below to use the hand control.
HOW TO TURN ON THE POWER
Slide the power switch to
the ÒonÓ position; the
power indicator will light.
Note: If there is a thin
sheet of clear plastic on
the face of the hand
control, remove it.
HOW TO USE THE MANUAL MODE
1. When the power is
turned on, the Manual
mode will be selected
and the Manual mode
indicator will light.
Note: If a different
mode is selected,
press the Mode
button repeatedly until
the Manual mode
indicator lights.
HOW TO OPERATE THE MASSAGE CHAIR
A
B
C
I
D
E
F
G
H
Power
Switch
Transformer
7
2. The massage chair
features three
separate massage
zones: the upper
back, lower back,
and thigh zones.
The massage zones
are controlled with
the Upper Back,
Lower Back, and
Thigh buttons. Pressing a button once will activate
a massage zone. Pressing the button again will
turn off the massage zone. Press the buttons to
activate the desired massage zones.
3. After you have
activated the desired
massage zones,
press the Intensity +
or Ð buttons to
adjust the intensity
of the vibrating
massage action.
Note: If no buttons on the hand control are
pressed for twenty minutes, the vibrating massage
action will automatically stop. To restart the
massage action, follow steps 1 through 3 above.
HOW TO USE THE AUTOMATIC MODES (FULL
BODY WAVE, FULL BODY PULSE, AND UPPER
BODY WAVE)
1. Press the Mode
button repeatedly to
select the desired
mode. A mode indicator will light to
show which mode is
selected.
When Full Body
Wave is selected,
the upper body,
lower body, and
thigh zones will be activated in sequence, producing a wave-like massage motion. When Full Body
Pulse is selected, the upper body, lower body, and
thigh zones will be activated together with a
pulsing motion. The Upper Body Wave is similar to
the Full Body Wave, but only the upper body and
lower body zones will be activated.
2. After you have
selected the desired
mode, press the
Speed and Intensity
buttons to adjust the
speed and intensity of
the vibrating
massage action.
Note: If no buttons on the hand control are
pressed for twenty minutes, the vibrating massage
action will automatically stop. To restart the
massage action, follow steps 1 and 2 above.
HOW TO ACTIVATE THE BUILT-IN HEATER
Whether the Manual
mode or one of the automatic modes is selected,
you can add soothing
heat to your massage, if
desired. To turn on the
heater, press the Heater
button. The Heater indicator will light. Press the button
again when you want to turn off the heater. Note:
When the heater is on, the maximum intensity setting
of the vibrating massage action will be lower. Therefore,
the intensity may decrease slightly when the heater is
turned on.
Note: If no buttons on the hand control are
pressed for twenty minutes, the heater will
automatically turn off. To turn on the heater, follow
the instructions above.
HOW TO TURN OFF THE POWER
To turn off the power, slide the power switch to the
ÒoffÓ position. The power indicator will darken.
HAND CONTROL TROUBLE-SHOOTING
If the hand control does not function properly, make
sure that the transformer on the power cord is
plugged into a 120-volt outlet. In addition, make sure
that the hand control is properly connected to the
massage pad (see assembly step 2 on page 5).
8
HOW TO REMOVE THE MASSAGE PAD FROM
THE FRAME
If desired, the massage pad can be removed from the
frame and used on the floor or a bed. Follow the steps
below to remove the massage pad.
1. Unplug the power
cord from the
outlet. It is recommended that you
also disconnect the
power cord from
the jack on the
massage pad.
2. Next, it is recommended that you
disconnect the wire
harness on the
hand control from
the wire harness
on the massage
pad. To disconnect
the wire harnesses,
first press down the
indicated small
latch.
3. Fold the massage chair into the storage position.
Slide the massage pad off the seat frame and the
back frame. Note: There is a sleeve between the
massage pad and the frame. Be careful not to
remove the sleeve as you remove the massage pad.
HOW TO USE THE MASSAGE PAD ON A FLOOR
OR BED
After the massage pad is removed from the frame,
reconnect the hand control and the power cord to the
massage pad (see the drawings at the left).
Next, spread the massage pad flat on the floor or bed.
If desired, pillows can be placed under the massage
pad for added comfort. WARNING: Do not place a
blanket or pillow on top of the massage pad.
Excessive heating can occur and cause fire,
electric shock, or injury to persons.
To operate the massage pad, refer to pages 6 and 7
of this manual.
HOW TO ATTACH THE MASSAGE PAD TO THE
FRAME
To use the massage pad on the frame, it is recommended that you first disconnect the power cord and
the hand control from the massage pad (see the
drawings at upper left).
Next, fold the massage chair into the storage position.
Slide the massage pad onto the frame (see the
drawing at the left). Make sure that the sleeve is
properly positioned between the massage pad and the
frame.
Finally, reconnect the hand control and the power cord
to the massage pad.
Massage Pad
Power Cord
Hand
Control
Latch
Massage
Pad
Massage
Pad
Back Frame
Massage Pad
Seat Frame
9
Check the massage chair periodically to make sure
that all parts are properly tightened.
The massage chair can be cleaned with a low-power
hand-held vacuum or a dry cloth. IMPORTANT: Never
use water or solvents to clean the massage chair.
If the hand control does not function properly, make
sure that the transformer on the power cord is
plugged into a 120-volt outlet. In addition, make sure
that the hand control is properly connected to the
massage pad (see assembly step 2 on page 5).
When the massage chair is not in use, it can be
folded for compact storage. IMPORTANT: Avoid
sharp folds in the massage pad when storing the
massage chair. Never place objects on top of the
massage chair during storage.
MAINTENANCE AND STORAGE
10
PART LISTÑModel No. 831.270000 R0497A
Key Part
No. No. Qty. Description
1 013278 4 5/16Ó x 2Ó Carriage Bolt
2 138565 2 Arm Cap
3 124916 2 5/16Ó x 3 3/4Ó Bolt
4 014073 4 5/16Ó Washer
5 012056 4 5/16Ó Nylon Locknut
6 138566 4 Frame Cap
7 138567 4 Pivot Cover
8 139285 2 Armrest
9 138568 2 Arm
10 138569 1 Seat Frame
Key Part
No. No. Qty. Description
11 133350 4 1/4Ó x 1 3/4Ó Screw
12 139279 1 Massage Pad
13 139284 1 Headrest
14 137817 1 Hand Control
15 138570 1 Back Frame
16 138278 1 Power Cord w/Transformer
17 138031 1 Sleeve
18 014063 4 1/4Ó Washer
19 012082 2 5/16Ó Nylon Jam Nut
# 138564 1 UserÕs Manual
Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. To order replacement parts, see the back cover of this manual.
11
16
12
17
14
1
2
3
3
5
4
5
4
6
6
6
19
8
7
7
9
10
15
11
13
7
17
18
2
1
8
9
11
18
6
19
EXPLODED DRAWINGÑModel No. 831.270000 R0497A
Part No. 138564 G01374-C R0497A Printed in USA © 1997 Sears, Roebuck and Co.
The model number and serial number of your PROFORM
¨
RESTORATION 2-IN-1 massage chair are listed on a decal
attached to the frame. See the front cover of this manual to find
the location of the decal.
All replacement parts are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.
When requesting help or service, or ordering parts, please be
prepared to provide the following information:
¥ The NAME OF THE PRODUCT (PROFORM¨RESTORATION
2-IN-1 massage chair)
¥ The MODEL NUMBER OF THE PRODUCT (831.270000)
¥ The PART NUMBER OF THE PART (see the PART LIST and
EXPLODED DRAWING on pages 10 and 11 of this manual)
¥ The DESCRIPTION OF THE PART (see the PART LIST and
EXPLODED DRAWING on pages 10 and 11 of this manual).
Model No. 831.270000
QUESTIONS?
If you find that:
¥ you need help assembling or
operating the massage chair
¥ a part is missing
¥ you need to schedule repair
service
call our toll-free HELPLINE
1-800-736-6879
MondayÐSaturday, 7 amÐ7 pm
Central Time (excluding holidays)
REPLACEMENT
PARTS
If parts become worn and need
to be replaced, call the following
toll-free number
1-800-FON-PART
(1-800-366-7278)
FULL 90 DAY WARRANTY
For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in
this SEARS MASSAGE CHAIR, contact the nearest SEARS Service Center throughout the United
States and SEARS will repair or replace the MASSAGE CHAIR, free of charge.
This warranty does not apply when the MASSAGE CHAIR is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
Loading...