ProForm 831.24813.0 User Manual
ModelNo.831.24813.0
Serial No.
TR A ILL
SE
Write the serial number in the space
above for future reference.
Serial
Numl
Decal
• Assembly
• Operation
• Maintenance
• Part List and Drawing
User's
Manual
Sears, Roebuck and Co.
Hoffman Estates, IL 60179
TABLE OF CONTENTS
WARNING DECAL PLACEMENT .............................................................. 2
IMPORTANT PRECAUTIONS ................................................................ 3
BEFORE YOU BEGIN ...................................................................... 5
ASSEMBLY ............................................................................... 6
OPERATION AND ADJUSTMENT ............................................................ 11
HOW TO FOLD AND MOVE THE TREADMILL .................................................. 17
TROUBLESHOOTING ..................................................................... 18
EXERCISE GUIDELINES ................................................................... 21
PART LIST .............................................................................. 22
EXPLODED DRAWING .................................................................... 24
ORDERING REPLACEMENT PARTS .................................................. Back Cover
90 DAY FULL WARRANTY .......................................................... Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the
warning decals. If a decal is missing or il-
legible, call 1-888-533-1333 and request
a free replacement decal. Apply the
decal in the location shown. Note: The
decals may not be shown at actual size.
KEEPHANDSANDFEETAWAY
FROMTHISAREAWHILETHE
TREADMILLISINOPERATION.
Protect yourself and
others from risk of serious
injury. Read the user's
manual and :
s;de rals when
I_ Sland only on the
__ start ng or stopping
treadmill,
•Change speed n
small ncrements,
•Hold handrails to
prevent faHng and
.Stop f you feel faint,
dzzy, or shod of
breath,
• Fullyegage sto age
latch before tread-
roll ismoved o_
stored
•Reduce _cline to its
lowest level before
foldL_g treadmill into
storage pos tion
.Never allow
...... ch d en0n0r
*Remove key whon
not_nuse.
.Keep cloth rig,
away Irom moving
bell
........ .Never t_y to adiust
or fix the belt while
_tismovng.
athletic shoes while
_ ,Always wea_
operating _readmill.
2
iMPORTANT PRECAUTIONS
WARNING: Toreducethe.skofse.ous niury,reada,importantprecautionsand
structions in this manual and all warnings on your treadmill before using your treadmill. Sears as=
sumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
.
Defore beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over age 35 or persons with
pre-existing health problems.
.
it is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmi!! only as described.
.
Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air open=
ings. To protect the floor or carpet from dam-
age, place a mat under the treadmill.
.
Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
.
Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
.
Keep children under age 12 and pets away
from the treadmill at all times.
.
The treadmill should be used only by persons
weighing 300 Ibs. (136 kg) or less.
should be on the same circuit. Do not use an
extension cord.
12.
Use only a single=outlet surge suppressor
that meets alJ of the specifications described
on page 11. To purchase a surge suppressor,
see your local Sears store or call the tele=
phone number on the back cover of this man-
ual and order part number 146148, or see
your local electronics store.
13.
Failure to use a properly functioning surge
suppressor could result in damage to the
controJ system of the treadmill, if the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.
14.
Keep the power cord and the surge suppres-
sor away from heated surfaces.
15.
Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU=
DLESHOOTING on page 18 if the treadmill is
not working properly.)
16.
Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 13).
.
Never allow more than one person on the
treadmill at a time.
10.
Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill. 18.
Athletic support clothes are recommended
for both men and women. Always wear ath-
letic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals. 19.
11.
When connecting the power cord (see page
11), plug the power cord into a surge sup-
pressor (not included) and plug the surge
suppressor into a grounded circuit capable of
carrying 15 or more amps. No other appliance
17.
Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails or crosswalk arms while using the
treadmill.
The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
20. Never leave the treadmill unattended while it 24.
is running. Always remove the key, unplug
the power cord, and switch the reset/off cir-
cuit breaker to the off position when the 25.
treadmill is not in use. (See the drawing on
page 5 for the location of the circuit breaker.)
21. Do not attempt to raise, lower, or move the
treadmil! until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 17.)
You must be able to safely lift 45 Ibs. (20 kg)
to raise, lower, or move the treadmill.
26.
22. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
27.
23. Never insert any object into any opening on
the treadmill.
SAVE THESE iNSTRUCTiONS
inspect and properly tighten all parts of the
treadmill regularly.
DANG ER:A waysunplugthepower
cord immediately after use, before cleaning the
treadmill, and before performing the mainte=
nance and adjustment procedures described in
this manual. Never remove the motor hood un-
less instructed to do so by an authorized ser-
vice representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.
This treadmil! is intended for in=home use
only. Do not use this treadmill in a commer-
cial, rental, or institutional setting.
Over exercising may result in serious injury
or death, if you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM ®
CROSSWALK SPORT treadmill. The CROSSWALK
SPORT treadmill offers an impressive array of features
designed to make your workouts at home more enjoy-
able and effective. And when you're not exercising, the
unique treadmill can be folded up, requiring less than
half the floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
Crosswalk Arm
Accessory Tray
Handrail
Storage Latch
ing this manual, please see the back cover of this man-
ual. To help us assist you, note the product model num-
ber and serial number before contacting us. The model
number and the location of the serial number decal are
shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Book Holder
Console
Pulse Sensor
Key/Clip
Upright
Walking Belt
Foot Rail
Idler Roller
Adjustment Bolts
Reset/Off
Circuit Breaker
Power Cord
Platform Cushion
5
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials, Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance, If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys _]and your own Phillips screwdriver (]_c_====_
adjustable wrench _, rubber mallet _, and scissors _=_.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. Extra hardware may be included. If a part is missing, call 1-888-533-
1333. To avoid damaging plastic parts, do not use power tools for assembly.
M8 Star M10 Star
Washer (10)-4 Washer (8)-8
1/4" Washer
(9)-4
Bolt Spacer (79)-4
.
Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (48) so that the treadmill is more stable;
do not fully fold the Frame yet.
Base Foot Spacer
(104)-2
#8 x 1/2" Screw
(22)-1
M4.2 x 19mm
Screw (1)-6
1/4" x 3 1/2" Bolt (4)-4
M10 x 96ram Bolt (5)-4
77
M8 x 25mm Bolt (6)-4
B
M4.2 x 25mm Tek
Screw (2)-4
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).
Cut the shipping tie securing the Upright Wire
(77) to the Base (85). Locate a tie in the indi-
cated hole in the Base, and use the tie to pull the
Upright Wire out of the hole.
Attach a Base Foot (81) to the Base (85) in the lo-
cation shown with a Base Foot Spacer (104) and
an M4.2 x 25mm Tek Screw (2). Then, attach an-
other Base Foot (81) with only a Screw (2).
81
2
48
104
RemovetheM10Nut(33),theM10x50mmBolt
2. 2
(27),andtheshippingbracket(C)fromtheBase
(85).AttachaWheel(86)withtheBoltandthe
Nutthatyoujustremoved.Donotovertighten
theNut;theWheelmustturnfreely.Discard
theshippingbracket.
82
Pressa BaseCap(82)intotheBase(85).
,
Identify the Right Upright (78) and the Right
Upright Spacer (80), which are marked with
"Right" stickers. Insert the Upright Wire (77)
through the Right Upright Spacer as shown. Set
the Right Upright Spacer on the Base (85).
Have a second person hold the Right Upright
(78) near the Base (85). See the inset drawing.
Tie the wire tie in the Right Upright securely
around the end of the Upright Wire (77). Then,
pull the other end of the wire tie until the Upright
Wire is routed completely through the Right
Upright.
27
86
Tie
78
77
80
,
Hold a Bolt Spacer (79) inside the lower end of
the Right Upright (78). Insert an M10 x 96mm
Bolt (5) with an M10 Star Washer (8) into the
Right Upright and the Bolt Spacer. Repeat this
step with a second Bolt Spacer (79), M10 x
96ram Bolt (5), and M10 Star Washer (8).
Hold the Right Upright (78) against the Right
Upright Spacer (80). Be careful not to pinch
the Upright Wire (77). Partially tighten the M10
x 96mm Bolts (5); do not fully tighten the
Bolts yet.
78
Tie
4
78
_8
, : 77
79
80
Withthehelpofasecondperson,carefullytip
5. 5
thetreadmillontoitsrightside.Partiallyfoldthe
Frame(48)sothetreadmillismorestable;do
notfullyfoldthe Frameyet.
Removeanddiscardthetwoindicatedbolts(A)
andtheshippingbracket(B).
AttachaBaseFoot(81)totheBase(85)inthelo-
cationshownwithaBaseFootSpacer(104)and
anM4.2x25mmTekScrew(2).Then,attachan-
otherBaseFoot(81)withonlyaScrew(2).
RemovetheM10Nut(33),theM10x50mm
Bolt(27),andtheshippingbracket(C)fromthe
Base(85).AttachaWheel(86)withtheBoltand
theNutthatyoujustremoved.Donotover-
tightentheNut;theWheelmustturnfreely.
Discardtheshippingbracket.
6. Press a Base Cap (82) into the Base (85).
Hold a Bolt Spacer (79) inside the lower end of
the Left Upright (73). Insert an M10 x 96mm Bolt
(5) with an M10 Star Washer (8) into the Left
Upright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (79), M10 x 96ram
Bolt (5), and M10 Star Washer (8).
Orient the Left Upright (73) and the Left Upright
Spacer (83) as shown. Hold the Left Upright
Spacer and the Left Upright against the Base
(85). Partially tighten the M10 x 96mm Bolts (5);
do not fully tighten the Bolts yet.
81
2
82
85
l
81
33
79
79
85
27
C
73
With the help of a second person, tip the tread-
mill so that the Base (85) is flat on the floor.
.
Set the Console (87) face down on a soft sur-
face to avoid scratching the Console. Identify the
Right Handrail (90), which has a large hole in the
location shown. Hold the Right Handrail near the
Console. Attach the console ground wire to the
Right Handrail with a #8 x 1/2" Screw (22).
Next, insert the console wire into the large hole
in the Right Handrail (90) and out of the top as
shown. Attach the Right Handrail with three
M4.2 x 19mm Screws (1). Make sure that no
wires are pinched. Start all three Screws be-
fore tightening any of them; do not over-
tighten the Screws.
Attach the Left Handrail (not shown) to the
Console (87) in the same way. Note: There are
no wires on the left side of the Console.
Console
90
Large
Hole
Console
Ground
87
.
Have a second person hold the console assem-
bly near the Right Upright (78). Cut the plastic
ties from the brackets on the Right Handrail (90)
and Left Handrail (not shown). Press the Cage
Nuts (38) back into place if necessary.
Console Assembly\
f
Connect the Upright Wire (77) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON.
Then, insert the connectors into the Right
Upright (78). Remove the wire ties from the
Upright Wire (77) and the console wire.
Set the console assembly on the Right Upright
(78) and the Left Upright (not shown). Make
sure that no wires are pinched.
.
Partially tighten two M8 x 25mm Bolts (6) with
two M8 Star Washers (10) into the Left Upright
(73) and the Left Handrail (89).
Q
3
77_Console Wire
/ /_ 78
0
Console /1_
Wire_
77_
Next, partially tighten two M8 x 25mm Bolts (6)
with two M8 Star Washers (10) into the Right
Upright (78) and the Right Handrail (90). Then,
tighten all four Bolts.
See steps 4 and 6. Tighten the four M10 x
96mm Bolts (5).
89
78
9
Loading...