Proform 831219522 Owner’s Manual

Model No. 831.21952.2
Serial No.

Write the serial number in the space
above for reference.

Serial Number

Decal (under frame)

• Assembly

• Operation

• Maintenance

• Part List and Drawing

BIKE EXERCISER

User's Manual

Sears, Roebuck and Co.
Noffman Estates, IL 60179

_/ FREE -,_

= HOW=TO

IWf,t®v,o_o,'I

"..- www.iFit.com -J

TABLE OF CONTENTS

WARNING DECAL PLACEMENT ............................................................... 2

IMPORTANT PRECAUTIONS .................................................................. 3

BEFORE YOU BEGIN ........................................................................ 4

PART IDENTIFICATION CHART ................................................................ 5

ASSEMBLY ................................................................................ 6

HOWTO USE THE EXERCISE BIKE ........................................................... 12

MAINTENANCE AND TROUBLESHOOTING .................................................... 18

FCC INFORMATION ........................................................................ 19

EXERCISE GUIDELINES .................................................................... 20

PART LIST ................................................................................ 21

EXPLODED DRAWING ...................................................................... 22

HOW TO ORDER REPLACEMENT PARTS .............................................. Back Cover

90 DAY FULL WARRANTY ........................................................... Back Cover

WARNING DECAL PLACEMENT

This drawing shows the location(s) of the warning
decal(s), if a decal is missing or illegible, call
1=888=533-1333 and request a free replacement
decal. Apply the decal in the location shown.
Note: The decal(s) may not be shown at actual size.

Keep hands and

fingers clear of
th=sarea.

WARNIN

• Misuseof this machine
may result in serious

injury.

• Read user's manual
prior to use and follow
all warnings and

instructions,

• Do not allow children
on or around machine.

• Pedals continue to
spin when you stop
pedaling.

• Spinning pedals can
cause injury.

• Reduce pedal speed
in a controlled manner,

• User weight must not

exceed 275 pounds,

• Replace label if
damaged, illegible, or

removed. _

2

iMPORTANT PRECAUTIONS

WARNING: Toreducetheriskofseriousinjury,reada, mportantprecaut oosand

instructions in this manual and all warnings on your exercise bike before using your exercise bike.
Sears assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

1. Before beginning any exercise program, 9.

consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.

2. Use the exercise bike only as described in 10.

this manual.

,

it is the responsibility of the owner to ensure
that all users of the exercise bike are ade =

quately informed of all precautions.

11.

.

The exercise bike is intended for home use
only. Do not use the exercise bike in a com-

mercial, rental, or institutional setting.

12.

.

Keep the exercise bike indoors, away from
moisture and dust. Do not put the exercise
bike in a garage or covered patio, or near

13.

water.

,

Place the exercise bike on a level surface,
with a mat beneath it to protect the floor or

carpet. Make sure that there is at least 2 ft.

14.

(0.6 m) of clearance around the exercise bike.

.

Inspect and properly tighten all parts regu=
larly. Replace any worn parts immediately.

Wear appropriate clothes while exercising;
do not wear loose clothes that could become

caught on the exercise bike. Always wear
athletic shoes for foot protection.

The heart rate monitor is not a medical
device. Various factors may affect the accu-

racy of heart rate readings. The heart rate
monitor is intended only as an exercise aid
in general.

The exercise bike should not be used by
persons weighing more than 275 Ibs.
(125 kg).

Always keep your back straight while using
the exercise bike; do not arch your back.

The exercise bike does not have a freewheel;

the pedals will continue to move until the
flywheel stops. Reduce your pedaling speed

in a controlled way.

Over exercising may result in serious injury
or death, if you feel faint or if you experience
pain while exercising, stop immediately and

cool down.

8. Keep children under age 12 and pets away

from the exercise bike at all times.

3

BEFORE YOU BEGIN

Thank you for selecting the new PROFORM XPTM 440
R exercise bike. Cycling is an effective exercise for

increasing cardiovascular fitness, building endurance,
and toning the body. The 440 R exercise bike provides
a selection of features designed to make your workouts
at home more effective and enjoyable.

For your benefit, read this manual carefully before
you use the exercise bike. If you have questions after

Length: 4 ft. 5 in. (135 cm)
Width: 2 ft. (61 cm) Console

Accessory Tray

reading this manual, please see the back cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The

model number and the location of the serial number
decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Handlebar

Backrest

Seat

Handle

Pedal

Wheel

Handlebar

Heart Rate Monitor

Adjustment Handle

Leveling Foot

4

PART iDENTiFiCATiON CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included, if a part is missing, please call 1-888=533=1333.

M5 Washer M5 Split

(80)-2 Washer (79)-2

M6 x 36mm

Screw (69)-2

M8 x 40mm

Screw (58)-4

M10 Jam Nut (57)-2

M8 x 15mm

Screw (78)-4

M4 x 16mm

Screw (61)-4

M8 x 20mm

Screw (55)-3

M10 x 80mm Screw/Bolt (54)-4

M5 x 16mm

Screw (60)-2

M8 x 30mm

Screw (56)-1

5

ASSEMBLY

Assembly requires two persons.

Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.

To identify small parts, see page 5.

1. Orient the Rear Stabilizer (31) as shown.

While a second person lifts the rear of the Frame
(1), attach the Rear Stabilizer (31) to the Frame

with two M10 x 80mm Bolts (54) and two M10
Jam Nuts (57).

In addition to the included tool(s), assembly
requires the following tools:

one Phillips screwdriver

one adjustable wrench

Assembly may be easier if you have your own set
of wrenches. To avoid damaging parts, do not use
power tools.

57

31

.

Orient the Front Stabilizer (32) as indicated by
the sticker.

While a second person lifts the front of the

Frame (1), attach the Front Stabilizer (32) to the
Frame with two M10 x 80mm Screws (54).

54

32

54

6

.

Orient the Upright (2) as shown. Have a second
person hold the Upright near the Frame (1).

Locate the wire tie inside the Upright (2). Tie the
lower end of the wire tie to the ends of the Main

Wire (53) and the Frame Pulse Wire (42).

Then, pull the other end of the wire tie upward
until the Main Wire (53) and the Frame Pulse
Wire (42) are routed completely through the
Upright (2).

.

Tip: Avoid pinching the wires. Set the Upright
(2) on the Frame (1).

Wire Tie_53

78

Attach the Upright (2) to the Frame (1) with four
M8 x 15mm Screws (78).

.

Orient the Shield Cover (12) as shown. Then,
insert the Main Wire (53) and the Frame Pulse
Wire (42) upward through the Shield Cover.

Slide the Shield Cover (12) onto the Upright (2).
Then, press the Shield Cover into the Right and
Left Frame Shields (38, 39).

Avoid pinching

the wires

53

42_

12

39

7

.

Orient the Console Plate (11) as shown. Then,
insert the Main Wire (53) and the Frame Pulse
Wire (42) upward through the Console Plate.

Tip: Avoid pinching the wires. Insert the
Console Plate (11) into the Upright (2).

Orient the Handlebar (13) as shown. Tip: Avoid
pinching the wires. Attach the Handlebar and
the Console Plate (11) to the Upright (2) with two
M8 x 20mm Screws (55).

.

The Console (4) can use four D batteries
(not included); alkaline batteries are recom-

mended, iMPORTANT: if the Console has
been exposed to cold temperatures, allow it

to warm to room temperature before insert=
ing batteries. Otherwise, you may damage

the console displays or other electronic
components.

Battery

Cover

53

42

Avoid pinching

\

the wires

\

Remove the battery covers from the back of the

Console (4), and insert batteries into the battery
compartments. Make sure to orient the bat=

reties as shown by the diagrams inside the
battery compartments. Then, reattach the bat-
tery covers.

To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console,
use only a manufacturer-supplied power
adapter. Plug one end of the power adapter into
the receptacle inside the battery compartment
on the console; plug the other end into an outlet

installed in accordance with all local codes and
ordinances.

Battery

Cover

ptacle

8