Pro-Form 660VX PETL62705.0 User Manual

Page 1

Serial Number Decal

Model No. PETL62705.0 Serial No.

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

USER'S MANUAL

www.iconeurope.com

Visit our website at

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:

ICON Health & Fitness, Ltd. Customer Service Department Unit 4, Revie Road Industrial Estate Revie Road Beeston Leeds, LS118JG UK

Tel:

Outside the UK: (44) 113 387 7133 Fax: (44) 113 387 7125

To help us assist you, please be prepared to give the following information:

• the MODEL NUMBER of the product (PETL62705.0)

• the NAME of the product (PROFORM 660 VX treadmill)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST on page 31 and the EXPLODED DRAWING in the centre of this manual)

08457 089 009

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call:

Or write: ICON Health & Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road, Beeston Leeds, LS11 8JG UK

email: csuk@iconeurope.com

08457 089 009

Page 2

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

HOW TO USE THE CHEST PULSE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING is attached in the centre of this manual.

PROFORM is a registered trademark of ICON IP, Inc.

PART LIST—Model No. PETL62705.0 R0805A

Key N

o. Qty. Description

Key

o. Qty. Description

Key

o. Qty. Description

1 2 Isolator Decal 2 6 3/4” Screw 3 39 Screw 4 1 Catch 5 6 Foot Rail Screw 6 2 Front Isolator 7 4 Hood Screw 8 8 Star Washer

9 2 Platform Bolt, Back 10 2 Platform Bolt, Front 11 4 Belt Guide Screw 12 2 Belt Guide 13 1 Left Handrail 14 1 Right Handrail 15 2 Frame Pivot Bolt 16 1 Left Foot Rail 17 1 Right Foot Rail 18 2 Isolator Bolt, Top 19 2 Isolator Top Cap 20 1 Console Frame Support 21 1 Latch Pin Assembly 22 2 Motor Bushing 23 1 Transformer 24 2 Motor Bolt 25 2 Isolator Spring 26 1 Motor Belt 27 1 Drive Motor 28 2 Frame Washer 29 4 U-nut 30 1 Outlet Assembly 31 2 Lift Frame Bolt 32

Lock Nut 33 14 1/2” Screw 34 1 Console 35

Fan Screw 36 1 Power Cord 37 1 Fan 38 1 Controller 39 1 Electronics Bracket 40 2 Rear Roller Washer 41 1 Hood

42 1 Front Roller Bushing 43 1 Lift Frame 44 2 Upright Endcap 45 1 Front Roller Bolt 46 1 Magnet 47 1 Front Roller 48 1 Walking Belt 49 1 Walking Platform 50 2 Latch Screw 51 1 Rear Roller 52 1 Left Rear Endcap 53 2 Rear Roller Bolt 54 1 Right Rear Endcap 55 1 Hex Key 56 1 Incline Stop Bracket 57 1 Ground Wire 58 1 Frame 59 1 Belly Pan 60 1 Reed Switch Bracket 61 1 Reed Switch Clip 62 1 Front Roller Nut 63 1 Reed Switch 64 4 Console Bolt 65 4 Extension Leg Bolt 66 5 Star Washer 67 4 Extension Leg Nut 68 2 Caution Decal 69 1 Warning Decal 70 2 Platform Nut 71 1 Cable Tie 72 1 Cotter Pin 73

Latch Housing 74 4 Tie Clamp 75 1 Releasable Tie 76

Access Door 77 1 Upright Wire Harness 78 1 Console Wire Harness 79 1 Key/Clip 80 2 Front Wheel 81 2 Wheel Bolt 82 6 Base Pad

83 10 1” Tek Screw 84 1 Upright 85 1 Console Base 86 1 Incline Motor Bolt 87 1 Hair Pin Cotter Pin 88 1 Incline Motor 89 2 Extension Leg 90 2 Rear Roller Bracket 91 2 Isolator 92 2 Isolator Bottom Cap 93 2 Isolator Bracket Cover 94 2 Isolator Bolt, Bottom 95 1 Idler Arm Pivot Bolt 96 1 Idler Arm Spacer 97 1 Idler Arm 98 1 Idler Arm Spring

99 2 Idler Arm Washer 100 1 Idler Arm Nut 101 1 Idler Arm Pulley 102 1 Pulley Bolt 103 1 Power Cord Adapter 104 1 Filter 105 1 Chest Pulse Strap 106 1 Chest Pulse Sensor 107 1 iFIT Wire 108 1 Shock 109 1 Pulse Receiver 110 1 Pulse Extension Wire 111 1 Ground Wire 112 2 Shock Clip

# 1 6” Blue Wire, 2F #

10” Red Wire, M/F # 1 12” Green Wire, M/Ring # 1 8” Black Wire, 2 Ring #

User’s Manual

“#” indicates a non-illustrated part. Specifications are subject to change without notice.

To locate the parts listed below, see the EXPLODED DRAWING attached in the centre of this manual.

Page 3

1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

6. Keep children under the age of 12 and pets away from the treadmill at all times.

7. The treadmill should be used only by persons weighing 135 kg (300 lbs.) or less.

8. Never allow more than one person on the treadmill at a time.

Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women.

Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

10. When connecting the power cord (see page

10), plug the power cord into an earthed circuit. No other appliance should be on the same circuit. When replacing the fuse, an ASTA approved BS1362 type should be fitted to the fuse carrier. A 13 amp fuse should be used.

11.

If an extension cord is needed, use only a 3-

conductor, 1mm2(14-gauge) cord that is no longer than 1.5 m (5 ft.).

12. Keep the power cord away from heated surfaces.

13. Never move the walking belt whilst the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 27 if the treadmill is not working properly.)

14. Never start the treadmill whilst you are standing on the walking belt. Always hold the handrails whilst using the treadmill.

15. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.

16. The pulse sensors are not medical devices. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in determining heart rate trends in general.

17. Never leave the treadmill unattended whilst it is running. Always remove the key, unplug the power cord, and switch the on/off switch to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.)

18. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 25.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

19. When folding or moving the treadmill, make sure that the storage latch is fully closed.

20. Inspect and properly tighten all parts of the treadmill regularly.

WARNING:T

o reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

CONDITIONING GUIDELINES

The following guidelines will help you to plan your exercise program. For more detailed exercise information, obtain a reputable book or consult your physician.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the proper intensity. The proper intensity level can be found by using your heart rate as a guide. The chart below shows recommended heart rates for fat burning and aerobic exercise.

To find the proper heart rate for you, first find your age near the bottom of the chart (ages are rounded off to the nearest ten years). Next, find the three numbers above your age. The three numbers define your “training zone.” The lower two numbers are recommended heart rates for fat burning; the higher number is the recommended heart rate for aerobic exercise.

Fat Burning

To burn fat effectively, you must exercise at a relatively low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses easily accessible

carbohydrate calories

for en-

ergy. Only after the first few minutes does your body

egin to use stored

at calories

or energy. If your goal is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone.

or maximum fat burning, adjust the speed and incline of the treadmill until your heart rate is near the middle number in your training zone.

Aerobic Exercise

If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand on the heart to pump blood to the muscles, and on the lungs to oxygenate the blood. For aerobic exercise, adjust the speed and incline of the treadmill until your heart rate is near the highest number in your training zone.

WORKOUT GUIDELINES

Each workout should include the following three parts:

A Warm-up—Start each workout with 5 to 10 minutes of stretching and light exercise. A proper warm-up increases your body temperature, heart rate and circulation in preparation for exercise.

Training Zone Exercise—After warming up, increase the intensity of your exercise until your heart rate is in your training zone for 20 to 60 minutes. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise—never hold your breath.

A Cool-down—Finish each workout with 5 to 10 minutes of stretching to cool down. This will increase the flexibility of your muscles and will help prevent postexercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired. The key to success is to make exercise a regular and enjoyable part of your everyday life.

WARNING:Before beginning this

or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pree

xisting health problems.

The pulse sensors are not medical devices. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in determining heart rate trends in general.

Page 4

The decals shown at the right have been placed on the treadmill. If a decal is missing or illegible, please call the telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.

1. When using iFIT.com programs, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or incline changes. I

n some instances, the speed and/or incline may change before the personal trainer describes the change.

22. When using iFIT.com programs, you can manually override the speed and incline settings at any time by pressing the speed and incline buttons. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the program.

23. Remove iFIT.com CDs and videos from your CD player or VCR and disconnect your MP3

layer when you are not using them.

24. Never insert any object into any opening.

25. DANGER: Always unplug the power

cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

26. This treadmill is intended for in-home use only. Do not use this treadmill in a commercial, rental, or institutional setting.

WARNING:Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

b. If the walking belt slips when walked on, remove

the key and UNPLUG THE POWER CORD. Using the h

ex key, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you s

hould be able to lift each edge of the walking belt 5–7 cm (2–3 in.) off the walking platform. Be careful to keep the walking belt centred. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

PROBLEM: The chest pulse sensor does not function properly

SOLUTION:

a. If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLE-

SHOOTING on page 9.

b. If the chest pulse sensor still does not function properly, the battery

should be changed. To replace the battery, first locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover, and turn the cover counterclockwise to the “open” position. Then, remove the cover.

Next, remove the old battery from the sensor unit, and insert a new CR 2032 battery,

with the battery oriented so the writing is on

top. Make sure that the rubber gasket is in place in the sensor unit.

Then, reinsert the battery cover and turn it to the closed position.

PROBLEM:

The incline of the treadmill does not change correctly

SOLUTION:

a. With the key in the console, press one of the Incline buttons. Whilst the incline is changing, re-

move the key. After a few seconds, reinsert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

Battery

Rubber Gasket

Battery Cover

Battery

Cover

Page 5

hank you for selecting the revolutionary PROFORM

60 VX treadmill. The 660 VX treadmill offers an impressive array of features designed to make your workouts at home more effective and enjoyable. And when you’re not exercising, the unique 660 VX treadmill can be folded up, requiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before using the treadmill. If you have questions, please call

he telephone number on the front cover of this man-

al. To help us assist you, please note the product model number and serial number before calling. The model number of the treadmill is PETL62705.0. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).

Before reading further, please review the drawing below and familiarise yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Upright

Storage Latch

Key/Clip

Circuit Breaker

On/Off Switch

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

RIGHT SIDE

Rear Roller Adjustment Bolts

Console

Water Bottle Holder

(no bottle is included)

Fan

BACK

With the help of a second person, carefully raise the Uprights (84) to the position shown. Next, carefully p

ivot the Hood (41) off.

Locate the Reed Switch (63) and the Magnet (46) on the left side of the Pulley (47). Turn the Pulley until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and the Reed Switch is about 3 mm (1/8 in.).

If necessary, loosen the Screw (3), move the Reed Switch slightly, and then retighten the Screw. Reattach the Hood, and run the treadmill for a few minutes to check for a correct speed reading.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm2(14-gauge) cord that is no longer

than 1.5 m (5 ft.).

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may become damaged. Remove the key and

UNPLUG THE

POWER CORD. Using the hex key, turn both rear roller

bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 5–7 cm (2–3 in.) off the walking platform. Be careful to keep the walking belt centred. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

c. If the walking belt still slows when walked on, see the front cover of this manual.

PROBLEM: The walking belt is off-centre or slips when walked on

SOLUTION:

a. If the walking belt is off-centre, first remove the key

and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the

hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left bolt counterclockwise 1/2 of a turn.

Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centred.

Rear Roller Bolts

5–7 cm

Top

View

3 mm

Page 6

276

ASSEMBLY

ssembly requires two persons.Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The unde rside of the treadmill wal king belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver (with a shaft at least 6” long) and wire cutters .

Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled.

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (58) so the treadmill is more stable. Do not fully

fold the treadmill until it is completely assembled.

Insert an Extension Leg (89) into the base of the Uprights (84) as shown. Next, hold two Extension Leg Nuts (67) in the bottom of the Extension Leg. Then, insert two Extension Leg Bolts (65) with Star Washers (8) into the top of the Extension Leg, and firmly tighten the Extension Leg Bolts into the Extension Leg Nuts.

With the help of a second person, carefully tip the treadmill onto its other side. Attach the other Extension Leg (not shown) as described above.

Attach four Base Pads (82) (only two are shown) to the base of the Uprights (84) with four 1” Tek Screws (83).

1” Tek Screw (83)–4

Star Washer (8)–8

Console Bolt (64)–4

Extension Leg Nut (67)–4

Latch Screw (50)–2

Extension Leg Bolt (65)–4

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call the telephone number on the front c

over of this manual.

PROBLEM: The power does not turn on

SOLUTION:

a. Make sure that the power cord is plugged into a properly earthed outlet. (See page 10.) If an ex-

tension cord is needed, use only a 3-conductor, 1 mm

(14-gauge) cord that is no longer than 1.5

m (5 ft.). Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the circuit breaker located on the treadmill

frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d. Check the on/off switch located on the treadmill

frame near the power cord. Make sure that the switch is in the on position.

PROBLEM: The power turns off during use

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the

circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for

five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console.

d. Make sure that the on/off switch is in the on position.

e. If the treadmill still will not run, see the front cover of this manual.

PROBLEM: The display of the console does not function properly

SOLUTION:

a. Remove the key from the console and UNPLUG THE

POWER CORD. With the help of a second person,

carefully tip the Uprights (84) down as shown. Next, remove the three Screws (3) and the three Hood Screws (7). Note: A phillips screwdriver with a shaft at least 5” long is required.

Tripped

Reset

Position

Page 7

Orient the Latch Housing (73) so the large hole is on the indicated side. Attach the Latch Housing to the left Upright (84) with two Latch Screws (50); start both

Latch Screws and then tighten them.

Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Next, insert the pin into the Latch Housing (73). Then, tighten the knob back onto the pin.

Spring

Collar

Knob

3. Insert the Wire Harnesses (77, 78) down into the right Upright (84).

Set the console assembly on the Uprights (84). Be care-

ful to avoid pinching the Wire Harnesses (77, 78).

Whilst a second person holds the console assembly, attach it with four Console Bolts (64) and four Star Washers (8) as shown; start all four Console Bolts and then

firmly tighten them.

Console

Assembly

77, 78

. With the help of a second person, carefully raise the

Uprights (84) to a vertical position.

Have the second person hold the console assembly near the Uprights (84) as shown. Look under the console assembly and locate the Console Wire Harness (78).

Cut the plastic ties securing the Upright Wire Harness (77) to the right Upright (84). Next, connect the Upright Wire Harness to the Console Wire Harness (78).

Make sure to connect the connectors properly (see the inset drawing). The connectors should slide together easily and snap into place.

If the connectors do not slide together easily and snap into place, turn one connector and then try again. IF THE CONNECTORS ARE

NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

Console

Assembly

Large

Hole

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down until the catch is past the latch pin.

2. Hold the frame firmly with both hands, and lower the frame to the floor.

Do not drop the frame to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.

Open

Catch

Latch Knob

Latch Pin

Page 8

8 25

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may bec

ome permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1. Hold the treadmill frame with your hands in the location

shown by the arrow at the right.

To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back.

Raise the frame about halfway to the

vertical position.

Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the frame until the catch passes the latch pin. Slowly release the latch knob.

Make sure that the

catch is resting against the latch pin.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the catch is rest-

ing against the latch pin.

1. Hold the upper ends of the handrails. Place one foot against one of the wheels.

2. Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. To re-

duce the risk of injury, use extreme caution whilst moving the treadmill.

Do not move the treadmill over an un

even surface.

3. Place one foot against one of the wheels, and carefully lower the treadmill until it is resting in the storage position.

Engaged

Catch

Latch Knob

Latch Pin

Base

Wheel

7. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the large hex key is used to adjust the walking belt (see page 28).

. Place the treadmill in the storage position (see HOW TO

FOLD AND MOVE THE TREADMILL on page 25).

Next, place the cylinder end of the Shock (108) near the b

racket on the base of the Uprights (84).

See the two small inset drawings. Using your fingernail or the end of a screwdriver, press on the end of the Shock Pin (112) to loosen it from the Shock (108). Next, rotate the Shock Pin and pull it out of the Shock.

careful to avoid losing the Shock Pin.

See drawing 5a. Press the cylinder end of the Shock (108) onto the ball on the bracket. Next, insert the end of the Shock Pin (112) through two of the small holes in the end of the Shock. Then, rotate the Shock Pin until it clips onto the Shock.

108

112

108

112

Bracket

Raise the Shock (108) to a vertical position. Remove the Shock Pin (112) from the raised end of the Shock as described in step 5. If necessary, rotate the Shock to align the end of the Shock with the ball on the bracket on the Frame (58).

Plug in the power cord as described on page 10. Turn on the power as described on page 12. Next, press the Incline increase and decrease buttons until the ball on the bracket is aligned with end of the Shock (108). Then, press the end of the Shock onto the ball. Note: It may be necessary to press the end of the Shock onto the ball whilst the Frame is moving.

See drawing 6a. Insert the Shock Pin (112) into the two indicated small holes in the end of the Shock (108). Then, rotate the Shock Pin until it clips onto the Shock. Note: Extra Shock Clips are included.

Press the Incline decrease button until the treadmill is at the lowest incline level. Then, unplug the power cord.

112

108

Holes

112

108

Bracket

112

Page 9

924

OW TO PUT ON THE CHEST PULSE SENSOR

he chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap into the hole in one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle on the chest strap. The tab should be flush with the front of the sensor unit.

Next, wrap the chest pulse sensor around your chest and attach the other end of the chest strap to the sensor unit. Adjust the length of the chest strap, if necessary. The chest pulse sensor should be under your clothes, tight against your skin, and as high under the pectoral muscles or breasts as is comfortable. Make sure that the logo on the sensor unit is facing forward and is right-side-up.

Next, pull the sensor unit away from your body a few inches and locate the two electrode areas on the inner side (the electrode areas are covered by shallow ridges). Using saline solution such as saliva or contact lens solution, wet both electrode areas. Return the sensor unit to a position against your chest.

CHEST PULSE SENSOR CARE AND MAINTENANCE

• Thoroughly dry the chest pulse sensor after each

use. The chest pulse sensor is activated when the electrode areas are wetted and the heart rate monitor is put on; the chest pulse sensor shuts off when it is removed and the electrode areas are dried. If the chest pulse sensor is not dried after each use, it may remain activated longer than necessary, draining the battery prematurely.

•

Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag o

r other container that may trap moisture.

• Do not expose the chest pulse sensor to direct sunl

ight for extended periods of time; do not expose it to temperatures above 50° C (120° F) or below -10° C (15° F).

• Do not excessively bend or stretch the sensor unit when using or storing the chest pulse sensor.

• Clean the sensor unit using a damp cloth—never use alcohol, abrasives, or chemicals. The chest strap may be hand washed and air dried.

CHEST PULSE SENSOR TROUBLESHOOTING

The instructions on the following pages explain how the chest pulse sensor is used with the console. If the chest pulse sensor does not function properly, try the steps below.

• Make sure that you are wearing the chest pulse sensor as described at the left. Note: If the chest pulse sensor does not function when positioned as described, move it slightly lower or higher on your chest.

• Use saline solution such as saliva or contact lens solution to wet the two electrode areas on the sensor unit. If heart rate readings do not appear until you begin perspiring, rewet the electrode areas.

• As you walk or run on the treadmill, position yourself near the centre of the walking belt. For the con-

sole to display heart rate readings, the user must be within arm’s length of the console.

•

The chest pulse sensor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia.

• The operation of the chest pulse sensor can be affected by magnetic interference caused by high power lines or other sources. If it is suspected that this is a problem, try relocating the treadmill.

• The CR2032 battery may need to be replaced (see page 29).

Chest Strap

Tabs

Sensor Unit

Tab

Sensor

Unit

Buckle

HOW TO USE THE CHEST PULSE SENSOR

THE INFORMATION MODE/DEMO MODE

he console features an information mode that keeps track of the total number of hours that the treadmill has b

een operated and the total number of miles that the walking belt has moved. The information mode also allows you to select miles or kilometres as the unit of measurement and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop button whilst inserting the key into the console, and then release the Stop button. When the information mode is selected, the following information will be shown in the display:

The priority display will show the total number of kilometres (or miles) that the walking belt has moved. The lower right corner of the display will show the total number of hours that the treadmill has been used. In addition, an “M” for metric kilometres or an “E” for English miles will appear in the lower left corner of the display. Press the Speed + button to change the unit of measurement.

IMPORTANT: If a “d” appears in the l

ower left corner of the display, the c

onsole is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automatically appear in a preset sequence; the buttons on the console will not operate.

If a “d” appears when the information mode is selected, press the Speed – button so “d” disappears.

To exit the information mode, remove the key from the console.

Page 10

10 23

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deterior

ate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an earthing plug.

Important: If the power cord is damaged, it must

be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Press the pins on the other end of the power cord into the indicated metal clips in the adapter. Close the adapter cover over the end of the power cord and tighten the screw in the adapter.

Important: Make sure that the adapter cover is secure and that the screw has been tightened before using the power cord.

See drawing 3. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances. Important: The treadmill is not compatible with

GFCI-equipped outlets.

Socket on Treadmill

Metal Clips

Pins

Screw

Adapter

Outlet

Adapter

Cover

OPERATION AND ADJUSTMENT

DANGER: Improper connection of the equipment-earthing conductor can result in an in-

creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

HOW TO USE AN IFIT.COM PROGRAM DIRECTLY FROM OUR WEB SITE

Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details.

To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 20. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements is found on our Web site.

Follow the steps below to use a program from our Web site.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

Select the iFIT.com mode.

See step 2 on page 21.

Go to your computer and start an internet connection.

Start your web browser, if necessary, and go to our Web site at www.iFIT.com.

Follow the desired links on our Web site to select a program.

Read and follow the on-line instructions for using a program.

Follow the on-line instructions to start the program.

When you start the program, an on-screen countdown will begin.

Return to the treadmill and stand on the foot rails. Find the clip attached to the key and slide the clip onto the waistband of your clothes.

When the on-screen countdown ends, the program will begin and the walking belt will begin to move. H

old the handrails, step onto the walking belt, and begin walking . During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change.

CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console.

However, when the next “chirp” is heard, the speed and/or incline will change to the next settings for the program.

To stop the walking belt at any time, press the Stop button on the console. To restart the program, press the Start button or the Speed + button. After a moment, the walking belt will begin to move at 2 km/h. When the next “chirp” is heard,

the speed and incline will change to the next settings of the program.

When the program is completed, the walking belt will stop. Note: To use another program, press the Stop button and go to step 5.

Note: If the speed and/or incline of the treadmill does not change when a “chirp” is heard, make sure that the letters “iFIT” appear in the matrix and that the time is not flashing in the display. In addition, make sure that the audio cable is properly connected.

Follow your progress with the matrix and the display.

See step 5 on page 12.

When you are finished exercising, remove the key from the console.

See step 8 on page 15.

Page 11

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of features designed to make your workouts more effective. When the manual mode of the console is selected, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measure your heart rate using the handgrip pulse sensor or the chest pulse sensor.

In addition, the console features 12 preset programs. Each preset program automatically controls the speed and incline of the treadmill as it guides you through an effective workout. The console also offers four pulse programs that control the speed and incline of the treadmill to keep your heart rate near target heart rate settings during your workouts.

In addition, a fitness test

program measures your VO

max, or aerobic capacity.

The console also features iFIT.com interactive technol

ogy. Having iFIT.com technology is like having a personal trainer in your home. Using the included audio cable, you can connect the treadmill to your portable stereo, home stereo, computer, or VCR and play special iFIT.com MP3, CD, and video programs (iFIT.com MP3 programs, CDs, and videocassettes are available

separately). IFIT.com programs automatically control the speed and incline of the treadmill as a personal trainer guides you through every step of your workout; high-energy music provides added motivation.

To download iFIT.com MP3 programs, go to www.iFIT.com. To purchase iFIT.com CDs or videocassettes, call the telephone number on the front cover of this manual.

With the treadmill connected to your computer, you can also go to www.iFIT.com and access iFIT.com programs directly from our Web site. See

www.iFIT.com for more information.

To use the manual mode of the console, follow the steps beginning on page 12. To use a preset program, see page 14. To use a pulse program, see

page 16. To use the fitness test program, see page

18. To use an iFIT.com MP3, CD, or video program, see page 21. To use an iFIT.com program directly

from our Web site, see page 23.

Note: If there is a sheet of clear plastic on the face of

the console, remove the plastic.

To prevent dam

age to the walking platform, always wear clean shoes when using the treadmill.

Clip

Key

During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the t

readmill is about to change. C

AUTION: Always listen for the “chirp” and be prepared for speed a

nd/or incline changes. In some instances, the speed and/or incline may change before your personal trainer describes the change.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However,

when the next “chirp” is heard, the speed and/or incline will change to the next settings of the program.

When the next “chirp” is heard, the speed and/or incline will change to the next settings of the program.

When the program is completed, the walking belt will stop. Note: To use another MP3, CD, or video program, press the Stop button or remove the key and go to step 1 on page 21.

Note: If the speed and/or incline of the treadmill does not change when a “chirp” is heard:

• Make sure that the letters “iFIT” appear in the

matrix and that the time is not flashing in the display. If the time is flashing, press the S tart button or the Speed + button on the console.

• Adjust the volume of your MP3 player, CD player, or VCR. If the volume is too high or too l

ow, the console may not detect the program

signals.

• Make sure that the audio cable is properly connected.

•

If you are using a portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

Follow your progress with the matrix and the display.

See step 5 on page 12.

Measure your heart rate if desired.

See step 6 on page 13.

Turn on the fan if desired.

See step 7 on page 13.

When you are finished exercising, remove the key from the console.

See step 8 on page 15.

CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player and VCR and disconnect your MP3 player when you are not using them.

Page 12

12 21

HOW TO TURN ON THE POWER

lug in the power cord (see page 10). Next, locate t

he on/off switch on the treadmill frame near the power cord. Make sure that the switch is in the on position.

Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 11), and slide the clip onto the waistband of your clothes. Then, insert the key into the console. After a moment, the matrix and the display will light.

Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is not pulled from the console, adjust the position of the clip as needed.

HOW TO USE THE MANUAL MODE

Insert the key into the console.

See HOW TO TURN ON THE POWER above.

Select the manual mode.

When the key is inserted, the manual mode will be selected. If a program or the iFIT,com mode has been selected, reselect the manual mode by pressing the iFIT button repeatedly until a track appears in the matrix but the letters “iFIT” do

not appear.

Start

the walking belt.

To start the walking belt, press the Start button, the Speed + button, or one of the ten numbered speed buttons.

If the Start button or the Speed + button is pressed, the walking belt will begin to move at 2 km/h. As you exercise, change the speed of the walking belt as desired by pressing the Speed + and – buttons. Each time a button is pressed, the speed setting will change by 0.1 km/h; if a button is held down, the speed setting will change in in

crements of 0.5 km/h. Note: After the buttons are pressed, it may take a moment for the walking belt t

o reach the selected speed setting.

f one of the ten numbered speed buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting.

To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed + button, or one of the ten numbered buttons.

Note: The first time the treadmill is used, observe the alignment of the walking belt, and align the walking belt if necessary (see page 28).

Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the Incline increase and decrease buttons. Each time a button is pressed, the incline will change by

0.5%. Note: After the buttons are pressed, it may take a moment for the treadmill to reach the selected incline setting.

Follow your progress with the matrix and the display.

Note: The matrix and the display can be backlit with any of five colors. To select the desired color, press the Display Color button repeatedly.

When the manual mode, the fitness test program, or the iFIT.com mode is selected, the matrix will show a 400-metre (1/4mile) track.

As you walk or run on the treadmill, the indicators around the track will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession.

The lower left corner of the display will show the approximate number of calories you have burned and the incline level of the treadmill. When you use the handgrip pulse sensor or the chest pulse sensor, the lower left corner of the display will also show your heart rate.

osition

HOW TO CONNECT YOUR VCR

ote: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is b

eing used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20.

A. Plug one end of a long 3.5 mm to RCA stereo audio

cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the AUDIO OUT jack on your VCR.

B. Plug one end of a long 3.5 mm to RCA stereo audio

cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

HOW TO USE AN IFIT.COM MP3, CD, OR VIDEO PROGRAM

To use an iFIT.com MP3, CD, or video program, the t

readmill must be connected to your MP3 player, CD

layer, or VCR. See HOW TO CONNECT THE TREADMILL TO USE IFIT.COM PROGRAMS on pages 19 to 21. To download iFIT.com MP3 pro-

grams, go to www.iFIT.com. To purchase iFIT.com CDs or videocassettes, call the telephone number on the front cover of this manual.

Follow the steps below to use an iFIT.com MP3, CD, or video program.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

Select the iFIT.com mode.

To select the iFIT.com mode, press the iFIT button repeatedly until a track and the letters “iFIT” appear in the matrix.

Press the Play button on your CD player or VCR.

Note: If you are using an iFIT.com CD, insert the CD into your CD player; if you are using an iFIT.com videocassette, insert the videocassette into your VCR.

A moment after the Play button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions. Note: If the time is flashing in the display, press the Start button or the Speed + button on the console. The treadmill will not respond to an MP3, CD, or video program whilst the time is flashing in the display.

AUDIO OUT

RIGHT

LEFT

VIDEO AUDIO

ANT. IN

FOUT

OUT

CH 34

Audio Cable

VIDEO AUDIO

ANT. IN

RF OUT

OUT

CH 34

Wire removed from

AUDIO OUT jack

RCA

Y-adapter

Audio Cable

Page 13

20 13

The lower right corner of the display will show t

he distance that you have walked or run, the e

lapsed time, your pace (in minutes per mile), and the speed of the walking belt. Note: When a program is selected (except for pulse program 4 and the fitness test program), the lower right corner of the display will show the time remaining in the program instead of the elapsed time.

The centre of the display is the priority display. Press the Priority Display button repeatedly until the priority display shows the information that you are most interested in viewing.

The Intensity display will indicate the approximate intensity level of your exercise. Level 10 is the highest intensity level.

Note: The console can display speed and distance in either kilometres or miles. A “Km/H” will appear in the right side of the display when the console is displaying speed and distance in kilometres. To change the unit of measurement, see THE INFORMATION MODE/DEMO MODE on page 24.

Note: For simplicity, all instructions in

this section refer to kilometres.

To reset the display, press the Stop button, re

move the key, and then reinsert the key.

Measure your heart rate if desired.

To use the chest pulse sensor, see page 9. To use the handgrip pulse sensor, see the instructions below. Note: If you use the chest pulse sensor and the handgrip pulse sensor at the same time, the console will not display your heart rate accurately.

To use the handgrip pulse s

ensor, first remove the sheets o

f clear plastic from the metal contacts. In addition, make sure that your hands are clean. Next,

stand on the foot rails and hold the metal contacts—avoid moving your hands

. When your pulse is detected, the heart symbol in the lower left corner of the display will appear, one or two dashes will appear, and then your heart rate will be shown.

For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds.

Turn on the fan if desired.

To turn on the fan, press the Fan button. To turn on the fan at high speed, press the button a second time. To turn off the fan, press the button a third time. Note: If the fan is left on when the walking belt is stopped, the fan will automatically turn off after a few minutes.

When you are finished exercising, remove the key from the console.

Step onto the foot rails, press the Stop button, and

adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest setting when the treadmill is folded to the storage position or the treadmill will be damaged. Next, re-

move the key from the console and put it in a secure place. Note: If the display remains lit after

the key is removed, the console is in the “demo” mode. See page 24 and turn off the demo mode.

When you are finished using the treadmill, switch the on/off switch to the off position and unplug the power cord.

Contacts

HOW TO CONNECT YOUR HOME STEREO

ote: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is b

eing used, see instruction B.

A. Plug one end of a long 3.5 mm to RCA stereo audio

cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the LINE OUT jack on your stereo. Note: Whilst the cable is plugged into the LINE OUT jack, do not plug your headphones into the headphone jack on the console.

B. Plug one end of a long 3.5 mm to RCA stereo audio

cable (available at electronics stores) into the input jack on the conso le. Plug the other end of the cable into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the LINE OUT jack on your stereo. Note: Whilst the Y-adapter is plugged into the LINE OUT jack, do not plug your headphones into the headphone jack on the console.

HOW TO CONNECT YOUR COMPUTER

. Plug one end of a long 3.5 mm to 3.5 mm stereo

audio cable (available at electronics stores) into the i

nput jack on the console. Plug the other end of the cable into the LINE OUT jack on your computer. Note: Whilst the cable is plugged into the LINE OUT jack, do not plug your headphones into the headphone jack on the console.

VCR

Amp

INE OUT

LINE OUT

Audio Cable

VCR

Amp

LINE OUT

Audio

Cable

RCA

Y-adapter

Wire removed from

LINE OUT jack

LINE OUT

Audio Cable

Page 14

14 19

OW TO USE A PRESET PROGRAM

nsert the key into the console.

ee HOW TO TURN ON THE POWER on page

12.

elect one of the preset programs.

To select a preset program, press the Programs button repeatedly until “P1,” “P2,” “P3,” or “P12” appears in the priority display.

A few seconds after a preset program is selected, the maximum incline setting of the program and the maximum speed setting of the program will flash in the display for a few seconds. The display will also show how long the program will last. A profile of the speed settings of the program will scroll across the matrix.

Press the Start button or the Speed + button to start the program.

A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking.

Each program is divided into several one-minute segments. One speed setting and one incline setting are programmed for each

segment

. Note: The same speed setting and/or incline setting may be programmed for two or more consecutive segments.

The speed setting for the first segment will be shown in the flashing Current Segment column of the matrix. (The incline settings are not shown in the matrix.) The speed

settings for the next several segments will be shown in the columns to the right.

When only three seconds remain in the first segm

ent of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the speed and/or incline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you.

When the first segment is completed,

all speed

settings will move one column to the left

. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the speed and incline settings for the second segment. Note: If all seven of the indicators in the Current Segment column are lit,

the speed settings

may move downward

so that only the highest indi-

cators appear in the matrix.

The program will continue in this way until the speed setting for the last segment is shown in the Current Segment column and the last segment ends. The walking belt will then slow to a stop.

If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the Speed or Incline buttons. Every few times a Speed button is pressed, an additional indicator will appear or disappear in the Current Segment column; if any of the columns to the right of the Current Segment column have the same number of lit indicators as the Current Segment column, an additional indicator may appear or disappear in those columns as well.

Important: When the current segment of the program ends, the treadmill will automatically adjust to the speed and incline settings for the next segment.

To stop the program at any time, press the Stop button.

To restart the program, press the Start

but

ton or the Speed + button. The walking belt will begin to move at 2 km/h. When the next segment of the program begins, the treadmill will automati

cally adjust to the speed and incline settings for the next segment.

Current

Segment

HOW TO CONNECT THE TREADMILL TO USE IFIT.COM PROGRAMS

To use iFIT.com MP3 or CD programs

, the treadmill

ust be connected to your MP3 player, CD player,

ortable stereo, home stereo, or computer. See pages 19 and 20 for connecting instructions. To use iFIT.com programs directly from our Web site, the treadmill must be connected to your computer. See page 20 for connecting instructions. To use iFIT.com video pro- grams, the treadmill must be connected to your VCR. See page 21 for connecting instructions.

HOW TO CONNECT YOUR MP3 PLAYER OR CD PLAYER

A. Plug one end of the included 3.5 mm to 3.5 mm

stereo audio cable into the input jack on the console. Plug the other end of the cable into a jack on your MP3 player or CD player. Plug your headphones into the headphone jack on the console.

HOW TO CONNECT YOUR PORTABLE STEREO

ote: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3

.5 mm LINE OUT jack, see instruction B. If your

stereo has only a PHONES jack, see instruction C.

A. Plug one end of a long 3.5 mm to RCA stereo audio

cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the AUDIO OUT jack on your stereo.

B. See the drawing above. Plug one end of a long 3.5

mm to 3.5 mm stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the LINE OUT jack on your stereo. Note: Whilst the cable is plugged into the LINE OUT jack, do not plug your headphones into the headphone jack on the console.

C. Plug one end of a long 3.5 mm to 3.5 mm stereo

audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the PHONES jack on your stereo. Plug your headphones into the headphone jack on the console.

LINE OUT

PHONES

LINE OUT

PHONES

Audio Cable

Headphones

AUDIO OUT

IGHT

LEFT

LINE OUT

Audio Cable

A/B

PHONES

Audio

Cable

Headphones

Page 15

18 15

Follow your progress with the matrix and the display.

See step 5 on page 12.

Measure your heart rate if desired.

See step 6 on page 13.

Turn on the fan if desired.

See step 7 on page 13.

When you are finished exercising, remove the key from the console.

When the program ends, make sure that the incline of the treadmill is at the lowest setting.

ext, remove the key from the console and put it in

a safe place. Note: If the display remains lit

after the key is removed, the console is in the “demo” mode. See page 24 and turn off the demo mode.

When you are finished using the treadmill, switch the on/off switch to the off position and unplug the power cord.

OW TO USE THE FITNESS TEST PROGRAM

The fitness test program measures your approximate V

ax, or aerobic capacity. VO

ax is a measure of your ability to intake and utilize oxygen to generate energy for endurance activities such as running and cycling. In technical terms, VO

max is the maximum volume of oxygen, in milliliters, that your body can use in one minute, per kilogram of body weight. A high VO

max indicates a high level of cardiorespiratory fitness. Note: To learn more about VO

max, refer to a reputable book or consult your physician.

For the most accurate results, use the fitness test program when you are not feeling tired, when you have not eaten for at least two hours, and when you have not exercised for at least 24 hours. Follow the steps below to use the program.

Put on the chest pulse sensor.

You must wear the chest pulse sensor to use the fitness test program.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

Select the fitness test program.

To select the fitness test program, press the Pulse Control button repeatedly until the word “FIt” appears in the priority display.

Enter your gender.

When the fitness test program is selected, the letters “GEn” (gender) and “M” (male) or “F” (female) will appear in the display (see the drawing above). Press the increase and decrease buttons above the Pulse Control button to enter your gender, and then press the Start button. Note: Pressing the Start button at this time will not start the fitness test program.

Enter your age.

Next, the word “AGE” and the current age setting will appear in the display. If you have not entered your age, press the increase and decrease buttons above the Pulse Control button to enter your age.

Press the Start button or the Speed + button to s

tart the program.

A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings of the program. Begin walking on the treadmill. Note: For the most accurate results, do not hold the handrails during the fitness test program.

During the program, the speed and incline of the treadmill will periodically change. The speed setting or the incline setting will flash in the display to alert you before each change.

Important: The Speed and Incline buttons will not function during the program.

The program is designed to last for nine minutes. When the program ends, the walking belt will slow to a stop and your VO

max will

appear in the display.

Note: If your pulse is not detected for several seconds during the program (the letters “PLS” will flash in the display), or if your heart rate exceeds 85% of your age-predicted maximum heart rate for several seconds during the program, the program may stop and “Vo2 – – –” may appear in the display. If this occurs, try the program again on another day. Make sure that you are wearing the chest pulse sensor as described on page 9.

Follow your progress with the matrix and the display.

See step 5 on page 12.

Turn on the fan if desired.

See step 7 on page 13.

When you are finished exercising, remove the key from the console.

See step 8 on page 15.

Page 16

16 17

OW TO USE A PULSE PROGRAM

Follow the steps below to use a pulse program.

Put on the chest pulse sensor.

You must wear the chest pulse sensor to use a pulse program.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

Select one of the pulse programs.

To select a pulse program, press the Pulse Control button repeatedly until “PLS1,” “PLS2,” “PLS3,” or “PLS4” appears in the priority display.

If pulse program 1, 2, or 3 is selected, a profile of the target heart rate settings of the program will scroll across the matrix (see the drawing above).

If pulse program 4 is selected, a pulse

symbol will scroll across the matrix.

nter a target heart rate setting.

If pulse program 1, 2, or 3 is selected,

the maximum target heart rate setting of the program will flash in the d

isplay. If desired, press the increase and decrease buttons above the Pulse Control button to change the maximum target heart rate setting (see EXERCISE INTENSITY on page 30). Note: If the maximum target heart rate setting is changed, the intensity level of the entire program will change.

If pulse program 4 is selected, the target heart rate setting for the entire program will flash in the priority display. If desired, press the increase and decrease buttons above the Pulse Control button to change the target heart rate setting

(see EX-

ERCISE INTENSITY on page 30).

Press the Start button or the Speed + button to start the program.

A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings of the program. Hold the handrails and begin walking.

Pulse programs 1, 2, and 3 are divided into several one-minute segments. One target heart rate setting is programmed for each segment. (Note: The same target heart rate setting may be programmed for two or more consecutive segments.) Pulse program 4 is divided into 40 one-minute segments. The same target heart rate setting is programmed for all segments. Note: For a shorter workout, simply stop the program before it ends.

If pulse program 1, 2, or 3 is selected, the target heart rate setting for the first segment will be shown in the flashing Current Segment column of the matrix. The target heart rate settings for the next several segments will be shown in the columns to the right. When only three seconds remain in the first segment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound.

CAUTION: I

f you have heart problems, or if you are over 60 years of age and have been inactive, do not use the pulse programs. If you are taking medication regularly, c

onsult your physician to find whether the

medication will affect your exercise heart rate.

Current

Segment

When the first segment ends,

all target heart rate

settings will move one column to the left.

The tar-

et heart rate setting for the second segment will then be shown in the flashing Current Segment c

olumn.

During all pulse programs, the console will regularly compare your heart rate to the target heart rate setting. If your heart rate is too far below or above the target heart rate setting for the current segment, the speed of the walking belt will automatically increase or decrease to bring your heart rate closer to the target heart rate setting.

If the speed or incline setting is too high or too low at any time during the program, you can adjust the setting with the Speed or Incline buttons. However, each time the console compares your heart rate to the target heart rate setting, the speed of the treadmill may automatically change to bring your heart rate closer to the target heart rate setting.

If your pulse is not detected during the program, the letters “PLS” will flash in the display and the speed of the treadmill may automatically decrease. If this occurs, see CHEST PULSE SENSOR TROUBLESHOOTING on page 9.

To stop the program at any time, press the Stop button. To restart the program, press the Start butt

on or the Speed + button. The walking belt will begin to move at 2 km/h. When the console comp

ares your heart rate to the target heart rate setting, the speed and/or incline of the treadmill will a

utomatically change to bring your heart rate closer to the target heart rate setting.

Follow your progress with the matrix and the display.

See step 5 on page 12.

Turn on the fan if desired.

See step 7 on page 13.

When you are finished exercising, remove the key from the console.

See step 8 on page 15.

Page 17

101

102

100

104

103

EXPLODED DRAWING—Model No. PETL62705.0 R0805A

To identify the parts shown on this EXP

LODED DRAWING, see the PART LIST on

page 31 of the user’s manual.

Page 18

108

107

105

106

109

110

111

112

EXPLODED DRAWING—Model No. PETL62705.0 R0805A