PROFITEC
TREND
User’s Guide
Exclusive OTB HDD 2,5” Enclosure
MT5075
2
EN
Contents
Package contents .......................................................................2
Features..........................................................................................2
Specifi cation .................................................................................2
Compatibility ...............................................................................3
Disk Installation ...........................................................................3
Hardware connection ...............................................................3
Driver Installation ....................................................................... 3
Unplugging the hardware ......................................................4
Hard disk Partitioning ............................................................... 5
One Touch Backup feature ......................................................8
Package contents
■ MT5075 I / MT5075 S
■ 2.5” External Enclosure
■ USB 2.0 extension cable
■ CD Driver
■ User Manual
Note: 1 pc per each
Features
■ Supports 2.5” HDD with all standard sizes (up to 8
mm thick)
■ Data transfer rate: Up to 480 Mbps
Note: (12Mbps on USB 1.1 operation system)
■ No need for extra driver (except on Windows 98)
■ Hot-swappable(Plug & Play)
■ One Key Backup
Specifi cation:
■ LED indicators: Power, HDD
■ Material: Stainless Steel+ leather+ABS.
■ Weight: 123.7 g(case only)
■ Dimension: 140.00mm*86.10mm*21.50mm
■ Power: USB 2.0
Remark: Specifi cations are subject to change
without prior notice.
Model MT5075 I MT5075 S
Interface USB 2.0 USB 2.0
HDD Supported PATA (IDE) SATA
3
EN
Compatibility
PC COMPATIBILITY
Minimum demands: Intel processor 350 MHz, 64 MB RAM
OS Compatibility: Windows 98 SE/ME/2000/XP/Vista
USB 1.1 / USB 2.0
Mac COMPATIBILITY
Minimum demands: Apple G3 Processor, 64 MB RAM
OS Compatibility: Mac OS 10.2 and higher for USB 2.0
Mac OS 9.1 - 10.2
Disk Installation
See as illustration shows:
Hardware Connection
1. Make sure your computer is in the operation system.
2. Connect enclosure and computer with USB 2.0 cable. Power LED will be on.
3. Then, system will recognize external enclosure automatically. Disk read/write operations are indicated
by HDD led.
Drivers Installation
Windows 98/ SE
Driver installing steps:
1. Insert the external enclosure driver CD. The Install
shield Wizard dialog box will be pop-upped. Click
[Next] icon to continue.
4
EN
2. Select the default option icon to continue , until the
setup wizard fi nished installing the USB disk, then
click [Finish] to restart computer.
3. When the installation is completed, the [Safe Remove] icon will appear on the taskbar when device
is connected.
Windows ME, 2000,XP, Vista
Device and install the necessary drivers automatically
when you plug enclosure into your computer for
the fi rst time. Since then, device will be recognized
automatically when plugged in to the same USB port.
MAC OS
A.
This external enclosure is supported by the Mass Storage Support 1.3.5 in Mac OS, no driver is required.
B. On the Mac OS 8.6, the software Mass Storage Sup-
port 1.3.5 has to be installed. Please download it
from the website: www.apple.com
C. On the Mac OS 9.0 or above, no driver is required.
The hard drive will appear on desktop whenever is
plugged in.
Unplugging the hardware
Windows 98 SE
1. Make sure that all relative windows are closed and
all running applications that are stored on the external drive are quitted.
2. Double click the Unplug or Eject hardware icon in
the taskbar and select the device that you want to
remove, and click [Safety Remove]
No extra driver is required to run under mentioned
systems. The system will detect an USB Mass Storage
5
EN
3.
When the system pop-up [Confi rm device to be
stopped], click [OK]. When the green icon disappears,
unplug the USB cable from computer.
Note: Do not unplug or remove the device when the
HDD LED is on or blinking.
Windows ME,2000,XP,Vista
1. Make sure that all relative windows are closed and
all running applications that are stored on the external drive are quitted .
2. Double click the [safe remove hardware] icon in the
taskbar.
3. Select [USB Disk] and click the [Stop] icon to safely
remove the device.(You can also click fi rst on [Display device components] to show the detailed information of the disk).
4. Once system prompts the “USB Mass Storage Device
can now be safely removed from the system” you
can unplug the USB device.
Note: Do not unplug or remove the device when the
HDD LED indicator is on or blinking.
Mac OS
When disconnecting the external enclosure from computer, close all windows and quit all running applications or programs that are stored or operated on the
external HDD. Drag the [External Drive] icon into [Trash
Bin] to dismount it from the desktop prior to unplugging the external enclosure from the connection port.
Hard disk partitioning
Windows 2000/2003/XP
Note: For a formatted Hard Drive, proceed to step 2.
Step 1. Click the [Start] icon and then select [Setting],
single click on [Control Panel] to open [Control Panel]
window. Double click on [Administrative Tools], and
then double click on [Computer Management].
6
EN
Step 2. Click on [Disk Management] under [Storage].
Your new hard drive will show the capacity.
Right click on [Disk 1] and choose [Initialize Disk]
Step 3. Click [Next] in the New Partition Wizard.
Step 4. Input your partition space then click [Next]
Step 5. Assign a drive letter for your new Hard drive,
and click [Next].
Step 6. Select the options as you like, and select
[Perform a quick format] to shorten formatting time,
then click [Next].
Step 7. Confi rm your setting and click [Finish]
Step 8. The formatting status is showing.
Step 9. When the status change to Healthy, your new
hard drive is about to be used.
7
EN
Step10. Go to My Computer, you will fi nd the new
device in the window.
Mac OS X
Note: For a formatted Hard drive, proceed to step 2.
Step 1. A warning window will pop up for new and
unformatted hard drive. Click [Initialize].
Step 2. Click [Go] on the desk bar and choose [Utilities],
click [Disk Utility].
Step 3.
■ Choose the new drive (1) under [Disk Utilities] and
click [Partition].
■ Click [Options] to choose format.
■ Refer to [Figure 1]. Choose the number of partitions
you want.
■ Name the new hard drive
■ Choose the [Format] icon
8
EN
■ Refer to [Figure 2]. Defi ne fi le system and size of partition. You can make more than one partition or else
leave it as default.
■ Click [Partition]
Figure 1: Choose the partition for your hard drive.
Figure 2: Choose the format for your hard drive.
Step 4. After the partition is over, an icon
with the [Name] you assigned appears
on your desktop. Double click the icon to
access the hard drive.
One Touch Backup feature
Enclosure is equipped with “OTB button” to create
automatic backup of specifi ed fi les and folders when
connected to computer. To use this feature you have to
install software fi rst, you will fi nd it on CD Driver.
Software installation
1. Open OneButton_Generic.exe” from CD Driver.
2. Follow on-screen commands to install application.
3. Restart Windows.
4. Program icon will appear on the Windows task bar.
Using OTB feature
Connect enclosure to computer. Press OTB button or
double click on program icon located in task bar.
Click „Backup” tab to specify which data should be
archived.
9
EN
In „Source Directories” section use disk and folders
tree, fi nd and mark folders you want to backup. In
“Destination drive” section select drive letter assigned
to external disk. Click “Exit” to fi nish settings.
Push OTB button to make automatic backup of marked
data. To restore backup go to „Restore” tab
Select backuped fi le you want to restore from the
backup fi les list. Click “Restore” to restore fi les to its
original path (it will replace fi les) or choose “New
directories” option to restore fi les to new destination.
10
EN
Note: This HDD enclosure is manufactured according to newest technology and specifi cation.
Media-Tech is not responsible for lost data and damaging hard disk.
For more information, drivers, instruction manuals, please visit our website: www.media-tech.eu
Manufacturer is restricting right to modernize and making changes of this device.
In accordance with continuous development of hardware and software some functions
demonstrated on pictures might be presented diff erently in the future.
Loading...