LIMITED WARRANTY
Profile Consumer Electronics, Inc. warrants this product to be free from defects in material and
workmanship for a period of One (1) year from the date of purchase by the original consumer
purchaser. If this product is proven to be defective within this one-year period, Profile will replace
it when said product is returned under instructions below, freight prepaid to Profile. This warranty
is valid only in the United States.
This warranty does not cover any expense incurred in the removal and/or reinstallation of this
product. This warranty does not cover damage caused by excess power usage than its published
power rating, accident, misuse, abuse, improper line voltage, fire, water, acts of God, or attempted
service by anyone other than Profile. This warranty does not cover broken cabinets or any other
accessories used in connection with this product or consequential damages due to a defect in the
product.
Any implied warranties, including fitness for use and merchantability, are limited in duration to the
period of the express warranty set forth above. No person is authorized to assume for Profile any
other liability in connection with the sale of the product. Profile expressly disclaims liability for
incidental and consequential damages that might be caused by this product. The remedies provided
under this warranty are exclusive and lieu of all others.
This warranty gives you specific legal rights. You may have other rights which vary from state to
state. Some states do not allow limitation on how long warranties last, so the above may not apply to
you. Additionally, some states do not allow the exclusion to limitation of consequential or incidental
damages, so the above limitation or exclusion may not apply to you.
Installation Instructions / Owner's Manual
CP65
6 1/2” COMPONENT SPEAKER PACKAGE
To Obtain Warranty Service:
1) Return defective speaker(s) back to the purchased store for an exchange before
attempting to send products to Profile.
2) If you failed to obtain warranty service from the purchased store, send defective
speaker(s) freight prepaid to Profile including the following:
! Sales receipt showing date and place purchased by an original owner, an
evidence that the unit is within the Warranty period.
! Your clear return shipping address and a daytime phone number.
Send to: Profile Consumer Electronics, Inc.
* Please allow 2~3 weeks for an exchange, which includes transit times.
RECORD THE DATE AND PURCHASE LOCATION FOR FUTURE REFERENCE.
Model No. __________________ Purchase Date __________________
Purchased From ________________________
KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE.
PROFILE CONSUMER ELECTRONICS, INC. 15060 SHOEMAKER SANTA FE SPRINGS, CA 90670
TEL: (562)404-9393 FAX: (562)404-9433 WWW.PROFILEUSA.COM
Speaker Exchange Dept.
15060 Shoemaker Ave.
Santa Fe Springs, CA 90670
2002 PROFILE CONSUMER ELECTRONICS
CP65 MANUAL REV 08.27.02
100000 - 082702
Manual By
www.extremeconcepts.com
INTRODUCTION
Congratulations on your purchase of a Profile state-of-the-art speakers. Your selection of a
Profile car audio product indicates a true appreciation of fine musical reproduction. Whether
adding to an existing system or including your Profile speakers in a new system, you are certain
to notice immediate performance benefits.
Before mounting the speakers, select a location that allows for at least 59 mm (2 5/16”) of
mounting depth. The speaker inside the door must not come in contact with the window when
rolled down. Additionally, the speaker should be out of the way of window cranks and door
handles allowing for normal operation.
PARTS LIST
TWEETER
MOUNTING HARDWARE
FLUSH MOUNT
RETAINING RINGS
GRILLES
182 (7 1/8”)
22 (7/8”)
54 (2 1/8”)
DIMENSIONS
160 (6 1/4”)
5 (3/16”)
45 (1 3/4”)
UNIT: mm (inches)
90 (3 1/2”)
5 (3/8”) 59 (2 5/16”)
MOUNTING DEPTH: 59 (2 5/16”)
TWEETER IN FLUSH MOUNTING KIT
168 (6 5/8”)
142 (5 5/8”)
RETAINING CLIPS
TWEETER HOUSING ASSORTMENT
MOUNTING
SIZE: 4 x 35mm
SCREWS
DOUBLE SIDED
TAPE
1
SPEAKER WIRES
LENGTH: 3m (9’ 10”)
CROSSOVER
MOUNTING SCREWS
16 (5/8”)
SPECIFICATIONS
CP65
Woofer ......................................................................6 1/2"
Woofer Cone................................................................Injection
Tweeter ..............................................................3/4” Silk Dome
Surround .....................................................................Rubber
Nominal Input Power..............................................10 ~ 85 Watts R.M.S.
Maximum Input Power ......................................................180 Watts
Impedance....................................................................4 Ohms
Magnet Weight.................................................................15 Oz.
Sensitivity................................................................89 dB/W/m
Frequency Response ...................................................55 ~ 22,000 Hz
Crossover Type................................................................2-Way
Due to continuing product improvements, design and specifications subject to change without notice.
6