Profile BX10 User Manual

BX10 10” Subwoofer

Installation Instructions / Owner's Manual

By

PROFILE CONSUMER ELECTRONICS, INC.

17625 FABRICA WAY
CERRITOS, CA 90703

TEL: [phone] FAX: [phone]

WORLD WIDE WEB: WWW.PROFILEUSA.COM

INTRODUCTION

Congratulations on your purchase of a California state-of-the-art subwoofer
component. Your selection of a California car audio product indicates a true
appreciation of fine musical reproduction. Whether adding to an existing system or
including a California subwoofer in a new system, you are certain to notice immediate
performance benefits.

KEEP YOUR SALES RECEIPT

Take this time to attach your sales receipt to the manual and put in a safe place. In
case of any unforeseen reason this product may need warranty service, your receipt
will be necessary to establish purchase date.

RECOMMENDATION

A speaker's performance is only as good as its enclosure. Proper installation,
enclosure size and crossover frequency will maximize the overall performance of the
subwoofer. To properly design and build an enclosure, knowledge of woodworking as
well as the proper tools are required. We highly recommend that you have your
enclosure built by an authorized Profile retailer. However, if you decide to install it
yourself, we have included the parameters of each driver and recommended
enclosure sizes.

WARNING!

WARNING!

California subwoofers are capable of high sound pressure levels. Exposure to

California subwoofers are capable of high sound pressure levels. Exposure to

high sound pressure levels can cause hearing loss or damage. Listening to your

high sound pressure levels can cause hearing loss or damage. Listening to your

system at loud levels while driving, will impair your ability to hear traffic

system at loud levels while driving, will impair your ability to hear traffic

sounds and emergency vehicles. Use common sense when listening to your

sounds and emergency vehicles. Use common sense when listening to your

system.

system.

When installing your subwoofer enclosure in the vehicle, fasten it securely

When installing your subwoofer enclosure in the vehicle, fasten it securely

to the frame or floorpan. If the enclosure is not secured properly, there

to the frame or floorpan. If the enclosure is not secured properly, there

is danger of it becoming a projectile in a collision

is danger of it becoming a projectile in a collision

Due to continuing product improvement, specifications and design are subject to change without notice.