Professional Series 750 Owner's Manual
PROFESSIONAL SERIES 750™
Owner’s Manual
Read and save these instructions
Vita-Mix® Corporation
8615 Usher Road
Cleveland, OH 44138-2103 U.S.A.
1-800-848-2649 / 1-440-235-4840
vitamix.com
CONTENTS
English ...................................................................................................................... 1
Français ................................................................................................................ 25
Español .................................................................................................................49
Let’s Get Started .............................................................................................. 3
Service and Registration ............................................................................4
Important Safeguards .................................................................................. 5
Parts and Features .......................................................................................... 7
Control Panel ...................................................................................................... 9
About The Blades ........................................................................................... 11
Tamper .................................................................................................................. 12
How To Use The Tamper ........................................................................... 13
Hints For Setting Speeds .........................................................................14
Operating Instructions ............................................................................... 15
Care And Cleaning ........................................................................................ 17
Troubleshooting ............................................................................................. 19
Warranty .............................................................................................................20
Specifications ...................................................................................................22
2
LET’S GET STARTED
Congratulations!
You are about to see how quick, easy, and delicious healthy eating can be!
Please read all the safety information, warnings, and instructional material
found in this booklet before getting started. Set your Vitamix machine on a
dry, level surface. Make sure that the power switch is set to Off, and that the
machine is plugged into a grounded electrical outlet. Then, follow the cleaning
instructions on page 17 to prepare your machine for use. Always clean your
machine before the first use.
3
SERVICE AND REGISTRATION
Vitamix Service
Record the model number and serial number of your Vitamix in the spaces
provided below for future reference. These numbers can be found on the back
of the motor base.
Model Number
Serial Number
Date of Purchase
Purchased From
Before returning this product for any reason, including repair, first contact
Vitamix Customer Service at 1-800-848-2649 or 1-440-235-4840, email
service@vitamix.com, or contact your local dealer.
Product Registration
If you purchased your Vitamix® machine directly from the Vita-Mix® Corporation
via the company’s website or call center by phone, your product was registered at
the time of purchase and your Vitamix machine’s warranty has been activated.
If you purchased your Vitamix machine from an International Distributor or Dealer
in countries other than the United States, Canada, United Kingdom, or Ireland, your
product is warranted through the International Distributor or Dealer and need not
be registered with the Vita-Mix Corporation.
Your machine is not yet registered with Vitamix if you:
1. Purchased from a Dealer in the United States, Canada, United Kingdom, or Ireland
2. Purchased from a military base
3. Purchased from a retail or wholesale store
4. Received your Vitamix machine as a gift
5. Are not the original owner of the machine
Enjoy faster and easier service in the future by taking a few minutes to
register your Vitamix machine today.
Choose one of these easy ways to register your machine:
1. Online at vitamix.com /warranty
2. Email service@vitamix.com
3. Call 1-800-848-2649 or 1-440-235-4840, press option 2
Your warranty may be honored by Vita-Mix® Corporation or an authorized dealer.
Failure to register your machine will not diminish your warranty rights.
4
IMPORTANT SAFEGUARDS
WARNING: To avoid the risk of serious injury when using your Vitamix®
blender, basic safety precautions should be followed, including the following.
READ ALL INSTRUCTIONS, SAFEGUARDS, AND
WARNINGS BEFORE OPERATING BLENDER.
1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical, sensory,
or mental capabilities or lack of experience and knowledge. Close supervision is
necessary when any appliance is used by or near children or incapacitated persons.
3. To protect against the risk of electrical shock, do not put the blender base in
water or other liquid.
4. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Call
Vitamix Customer Service at 1-800-848-2649 or 1-440-235-4840 or email
service@vitamix.com at once for examination, repair, replacement, or electrical
or mechanical adjustment. If purchased outside the U.S.A. or Canada, contact
your local Vitamix dealer.
7. Alteration or modification of any part of the blender base or container, including
the use of any part or parts that are not genuine authorized Vitamix parts, may
cause fire, electric shock, or injury.
8. The use of attachments not expressly authorized or sold by Vitamix for use with
this blender, including canning jars, may cause fire, electric shock, or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surface, including the stove.
12. Keep hands and utensils out of container while blending to reduce the risk of
severe injury to persons or damage to the blender. A rubber scraper or spatula
may be used, but only when the Vitamix blender is not running.
13. The tamper provided must be used only when the main part of the lid is in place.
14. Blades are sharp. Handle or remove blade and blade assembly from the container
with extreme care to avoid injury. To reduce the risk of injury, never place a blade
assembly on the motor base unless assembled to the Vitamix container.
15. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the
container as this will damage the blades and other components when starting
the machine and may cause injury.
16. Never attempt to operate with damaged blades.
17. Always operate blender with lid and lid plug firmly in place. The lid plug should
be removed only when adding ingredients and when using the tamper.
5
IMPORTANT SAFEGUARDS
18. When blending hot liquids or ingredients, use caution; spray or escaping steam may
cause scalding and burns. Do not fill container to the maximum capacity. Always
begin processing on the lowest speed setting, Variable Speed 1. Keep hands and
other exposed skin away from the lid opening to prevent possible burns.
19. When making nut butters or oil-based foods, do not process for more than one
minute after the mixture starts to circulate in the container. Processing for longer
periods can cause dangerous overheating.
SAVE THESE INSTRUCTIONS
WARNING
To Avoid Injury.
Read and understand instruction manual
before using this machine.
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not intended to be
used for commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair, servicing, or the replacement of parts must be performed by Vitamix
or an authorized service representative.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death
or electrical shock.
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS
AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR
VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK
OF SERIOUS INJURY.
6
PARTS AND FEATURES
On / Off Switch: The On / Off
(or Power) Switch is on the righthand side of the machine base.
The On / Off Switch controls the
power to the machine.
Start / Stop Switch: Pressing down on
the Start / Stop Switch will initiate the
blending process. Pressing down on
the Start / Stop Switch again will stop
the blending process.
Variable Speed Dial: The center
Variable Speed Dial serves two
functions; the use of five programs or
the use of ten Variable Speed settings.
Pulse Switch ( ): The Pulse Switch
can be used when using Variable
Speeds or Programs.
Container: Ounces, cups, and milliliters
are clearly marked.
2-Part Lid: The 2-part Lid is easy to
put on and take off and easy to clean.
Always use the lid and the lid plug
when the machine is in operation.
CAUTION: Lids and tampers are
not interchangeable between different
container styles, types, and sizes.
Snap the lid onto the container and
leave in place for a few minutes. Once
the lid has been left on the container, it
will be much easier to lock or remove.
Lid Plug: Insert through the lid and
secure by turning clockwise. Remove
the lid plug to use the tamper or
add ingredients.
Tamper: The tamper allows you to
accelerate the process of very thick
and / or frozen mixtures that cannot be
processed in a regular blender. Using
the tamper maintains circulation by
preventing air pockets from forming.
Lid Plug
2-Part Lid
Lid Flaps
Blade
Assembly
Container
Retainer Nut
Drive Socket
Centering
Pad
Start / Stop
Switch
Pulse
Switch
Motor Base
Feet
Variable
Speed Dial
Tamper
7
PARTS AND FEATURES
WARNING
Rotating Blades Can Cause Severe Injury.
DO NOT reach into container
while machine is running.
To Lock the Lid in Place: Position lid on container with lid flaps midway between
the spout and the handle. Push the lid onto the container until it locks in place.
The lid must always be secured when processing, especially hot liquids that may
scald. Never operate the blender without checking to make sure the lid is securely
locked in place.
To Remove the Lid: Lift up on one lid flap while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked”
to “unlocked” position and lift out.
Automatic Overload Protection:
Your Vitamix motor is designed to
protect itself from overheating. If the
motor shuts off, follow these instructions:
Turn off the power switch for up to
45 minutes to reset. Reset time will be
extended if high room temperatures
exist. To reduce the reset time, unplug
the machine, remove the container, and
blow air into the center section of the
bottom with a hair dryer on the
cool setting.
Power Cord: Your machine is equipped
with a long power cord. Store the unused
portion neatly underneath.
Bottom View / Cord Wrap: Plastic cord
retainers hold the cord securely. They are
flexible, and return to position after the
cord is lifted out.
Front
Back
On/Off
Switch
8
CONTROL PANEL
OFF
ON
5
4
23
1
1. On / Off Switch:
The On / Off (or Power) Switch is located on the lower right-hand side
of the machine. The On / Off Switch controls the power to the machine.
BEFORE moving the On / Off Switch to the On (I) position, make sure
the marker on the Variable Speed Dial is pointed at the Stop Symbol ( )
at the top of the dial.
After plugging in the unit, move the On / Off Switch to the On position to
ready the machine for blending. Move the On / Off Switch to the Off position
at night and whenever the machine will be left unattended.
If the On / Off switch is moved to the Off position to stop a program mid-cycle,
wait 30 seconds for power to recycle and the timer to reset before moving the
On / Off switch to the On position.
When the Pulse, Start / Stop, and Program Symbols brighten, the On / Off
Switch is in the On position and power is flowing.
2. Start ( ) / Stop ( ) Switch:
After the marker on the Variable Speed Dial is rotated off of the Stop Symbol
( ) to either Variable Speed 1 or a Program setting, press the Start / Stop Switch
to start the machine and initiate the blending process. Pressing the Start / Stop
Switch again will stop the blending process.
Programs can be interrupted by pushing down the Start / Stop switch at any
time. If reactivated by pushing down the Start / Stop switch, the program will
start at the beginning.
3. Pulse Switch ( ):
Variable Speed: Pressing down on the Pulse Switch will cause the machine to
blend at the speed setting shown on Variable Speed Dial for as long as the
Pulse Switch is held down.
Programs: The Pulse function can be used when a program is selected. Pushing
down the Pulse switch when a program is selected will cause the machine to
run at 50% of high power for as long as the Pulse switch is pushed down.
9
CONTROL PANEL
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid plug
securely in place prior to operating the machine.
Always start on Variable 1, slowly increase to 10.
4. Variable Speed Dial:
The Variable Speed Dial serves two functions; the use of five programs
settings or ten Variable Speed settings.
• To use programs: rotate the Variable Speed Dial to the left to the
desired program.
• To use Variable Speed:
a. Rotate the Variable Speed dial right to 1.
b. Press down on the Start / Stop switch.
c. Rotate the Variable Speed dial to the right or left during blending
to increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the marker on the Variable
Speed dial back to the Stop Symbol ( ) at the top of the dial.
5. Programs:
Your Professional Series 750 is equipped with five program settings for the
most commonly used recipes. Rotating the Variable Speed Dial left of center
allows you to select a program for Smoothies, Frozen Desserts, Soups, Purées,
and a Cleaning cycle. These programs are optimized for these recipe categories,
but may also work well with other recipe choices.
10
W
ABOUT THE BLADES
The Vitamix machine comes standard with the wet blade container. The blade is
identified by a “W” for wet. This blade is used for most of your recipes. Additional
containers with wet or dry blades may be purchased separately.
WARNING
Rotating Blades Can Cause Severe Injury.
DO NOT reach into container
while machine is running.
Wet Blade Container: Designed for processing liquids, including
juice, frozen mixtures, sauces, soups, purees, batters, and for
W
D
wet chopping. The wet blades can also grind grain and knead
dough, but they are not quite as efficient as the dry blades in
this application. If used for grinding, your container will mar and
become cloudy; see instructions for dry container use.
Dry Blade Container: These blades are clearly marked “D” and
are designed specifically for grinding dry materials such as grains,
cereal, and coffee, and are also used for kneading bread dough.
The dry blades can NOT process liquids efficiently. If you grind
herbs on a regular basis, you may wish to purchase a separate
dry blade container and replace blades as needed.
CAUTION
Moving Parts
May Become
Hot With
Extended Use.
DO NOT TOUCH.
11
TAMPER
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between different
container styles, types, and sizes.
supplied with your machine.
How to Determine the Tamper that Can
Be Used with Your Container
Each type of tamper is designed to be used safely and effectively with a
particular container. If a tamper came with your container, it is the correct
tamper for the container. If a tamper did not come with your container, or you
want to determine if a tamper that you already have can be used with your new
container, please compare your container with the containers and matching
tampers to the illustration below.
Use the tamper that was
64 oz. / 2,0 L (SHORT) 64 oz. / 2,0 L (TALL) 48 oz. / 1,4 L 32 oz. / 0,9 L
Before using the tamper during the blending process, verify that it is the
correct tamper.
• 64 oz. Short Containers use Tamper P / N 016041 that is approximately 9 ¾ inches long.
• 64 oz. Tall Containers uses Tamper P / N 000760 that is approximately 12 ½ inches long.
• 32 oz. and 48 oz. Containers use Tamper P / N 015033 that is approximately 11 inches long.
To verify that you are using the correct tamper, place the lid on an empty container,
remove the lid plug and insert the tamper. If it is the correct tamper it should easily
fit into the opening but will not come in contact with the blades no matter how you
move the tamper inside the container. IF THE TAMPER TOUCHES THE BLADES AT
ANY ANGLE–DO NOT USE THE TAMPER WITH YOUR CONTAINER.
If you do not have the correct tamper for your container, call Vitamix Customer
services at 1-800-848-2649 or 1-440-235-4840 or e-mail service@vitamix.com to
order a new tamper. If purchased outside the United States or Canada, contact
your local Vitamix Dealer.
12
HOW TO USE THE TAMPER
WARNING
Rotating Blades Can Cause Severe Injury.
DO NOT put hands, spatulas, etc. in the
container while the machine is running or
while the container is still on the base.
Lids and tampers are not interchangeable
between different container styles, types,
and sizes. Use the tamper that was
supplied with your machine.
IMPORTANT!
• The splash disk (near the top of the
tamper) and lid prevent the tamper
from hitting the blades when the lid is
secured properly in the locked position.
• The container should not be more than
two-thirds full when the tamper is used
during blending.
• To avoid overheating during blending,
DO NOT use the tamper for more than
30 consecutive seconds.
• If the food does not circulate, the
machine may have trapped an air
bubble. Carefully remove the lid plug
while making sure the lid stays firmly
in place. Release the air bubble by
inserting the tamper through the lid
plug opening.
• Holding the tamper straight down may
not help the ingredients circulate. If
necessary, point the tamper toward the
sides or corners of the container. DO
NOT try to force the tamper deeper
into the container.
Tamper
Tamper Splash Disk
Lid
Blade Assembly
13
HINTS FOR SETTING SPEEDS
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid plug
securely in place prior to operating the machine.
Always start on Variable 1, slowly increase to 10.
Variable Speed
Before using the Variable Speed option, always begin with the Variable Speed
Dial marker pointed at the Stop Symbol ( ) at the top of the dial.
• Rotate the dial right to Variable Speed 1.
• To activate the blending process, press down on the Start / Stop Switch.
• Slowly turn the Variable Speed Dial to the desired speed depending
on the recipe used.
• At the end of the blending cycle, rotate the Variable Speed dial back
to the Stop Symbol ( ) at the top of the dial.
Use the highest setting called out in the recipe for as much of the processing time as
possible to make whole-food juices, soups, shakes, frozen mixtures, purées, nut butters,
and for grinding grains. Processing times will generally be less than one minute (most
take less than 30 seconds). Higher speed provides the best quality of refinement.
Blending too long at too low of a speed setting will overheat the machine and
cause the Automatic Overload Protection to turn off the machine. Blending on
higher speed maximizes the motor’s cooling fan to avoid overheating.
If the mixture stops circulating, you may have trapped an air bubble. To resolve Insert
the tamper through the lid plug and stir until it “burps.” If this does not work, press
the On / Off switch to stop the motor. Remove the container from the motor base,
and use a rubber spatula to press the air bubble away from the blades. Return the
container to the motor base, replace the lid, and continue blending.
Programs
Programs vary in blending speed and duration and will automatically
stop at the end of the program.
• The Smoothie ( ) program runs for approximately 45 seconds.
• The Frozen Dessert ( ) program runs for approximately 55 seconds.
• The Hot Soup ( ) program runs for approximately 5 minutes 45 seconds.
• The Purée ( ) program runs for approximately 1 minute.
• The Cleaning ( ) program runs for approximately 1 minute.
14
OPERATING INSTRUCTIONS
Wet Blade Container
The Wet Blade Container is designed for processing liquids, including juice,
frozen mixtures, sauces, soups, purées, batters, and for wet chopping. Before
using this container for Programs or the Variable Speed option, always begin with
the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.
1. Move the On / Off switch to the On position.
2. Load the container before placing it on the motor base. Place liquids and soft foods
in the container first, solid items and ice last. Although not necessary for blending,
you may want to cut or break food into smaller pieces for more precise measuring
of ingredients.
3. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending
(unless the tamper is inserted through the lid plug opening). Especially when
blending hot ingredients, make sure that the lid is securely latched.
4. With the motor off, set the wet blade container on the motor base by aligning it
over the centering pad. Do not ever attempt to put a container on an operating
motor base or to operate a motor base without a container properly in place.
5. Use the Variable Speed dial to select a function.
• Variable Speed: Rotate the dial right of center to Variable Speed 1.
• Programs: Rotate the dial left of center to the desired program.
6. Activate the blades by pressing the Start / Stop Switch. Your container
may shift as it gets into an aligned position.
• Variable Speed: slowly rotate the Variable Speed dial to the right to
the desired speed.
• Programs: The programs vary in blending speed and duration and will
automatically stop at the end of the program. Programs can be interrupted
by pushing down the Start / Stop switch at any time. If reactivated by pushing
down the Start / Stop switch, the program will start at the beginning.
7. If the mixture stops circulating, you may have trapped an air bubble. To resolve
Insert the tamper through the lid plug and stir until it “burps.” If this does not work,
press the On / Off switch to stop the motor. Remove the container from the motor
base, and use a rubber spatula to press the air bubble away from the blades. Return
the container to the motor base, replace the lid, and continue blending.
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid plug
securely in place prior to operating the machine.
Always start on Variable 1, slowly increase to 10.
15
OPERATING INSTRUCTIONS
8. Take proper care when handling and processing hot ingredients and making
hot soups and sauces.
9. Due to the machine’s speed, processing times are much quicker than standard
appliances. Until you are accustomed to the machine, count your time carefully
to avoid over-processing.
10. After pressing the Start / Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Dry Blade Container
Before using this container for programs or the Variable Speed option, always begin
with the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.
If purchased, your dry blade container should be used only for hard,
dry materials, such as grain, and for kneading dough.
1. Load the container before placing it on the motor base.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid plug opening).
3. With the motor off, set the dry blade container on the motor base by aligning
it over the centering pad. Do not ever attempt to put a container on an operating
motor base or to operate a motor base without a container properly in place.
4. To begin, make sure the On / Off switch is in the On position.
5. Use the Variable Speed dial to select a function.
• Variable Speed: Rotate the dial right of center to Variable Speed 1.
• Programs: Rotate the dial left of center to the desired program.
6. Activate the machine by pressing the Start / Stop Switch. Your container will
shift and get into an aligned position.
• Variable Speed: slowly increase the Variable Speed to the desired speed.
• Programs: The programs vary in blending speed and duration and will
automatically stop at the end of the program. Programs can be interrupted
by pushing down the Start / Stop switch at any time. If reactivated by pushing
down the Start / Stop switch, the program will start at the beginning.
16
CARE AND CLEANING
Container
To prepare your new machine for initial use, follow the steps under Normal
Cleaning below. This will clean the unit and break-in the motor.
Normal Cleaning
Before using the Variable Speed or Program options, always begin with the
Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.
1. Fill the container half full with warm water and add a couple drops of liquid
dish washing detergent to the container.
2. Snap or push the complete 2-part lid into the locked position.
3. Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable Speed dial to 1.
b. Press the Start / Stop switch.
c. Slowly increase Variable Speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable Speed dial to the Stop Symbol ( )
at the top of the dial.
• Program:
a. Rotate the Variable Speed dial to the Cleaning ( ) program icon.
The Cleaning ( ) program will run for approximately 1 minute.
b. After the program stops, rotate the Variable Speed dial to the
Stop Symbol ( ) at the top of the dial.
4. Rinse and drain the container.
To Sanitize
Before using the Variable Speed or Program options, always begin with the
Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.
1. Follow the cleaning instructions above.
2. Fill the container half full with water and 1 ½ teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into the locked position.
4. Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable Speed dial to 1.
b. Press the Start / Stop switch.
17
CARE AND CLEANING
c. Slowly increase Variable Speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable Speed dial to the Stop Symbol ( )
at the top of the dial.
• Program:
a. Rotate the Variable Speed dial to the Cleaning ( ) program icon.
The Cleaning ( ) program will run for approximately 1 minute.
b. After the program stops, rotate the Variable Speed dial to the
Stop Symbol ( ) at the top of the dial.
5. Allow mixture to stand in the container for an additional 1 ½ minutes.
6. Pour bleach mixture out. Allow container to air dry.
7. Do not rinse after sanitizing.
WARNING
Electrical Shock Hazard.
Disconnect power before
cleaning machine.
Failure to follow instructions can
cause death or electrical shock.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash parts in warm, soapy water.
Rinse clean under running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put
the container, lid, lid plug or tamper in the dishwasher.
Motor Base
1. Unplug the power cord.
2. Wash the outside surface with a damp, soft cloth or sponge that has
been rinsed in a mild solution of liquid detergent and warm water.
Do not place the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so they work freely. They may become sticky
from use. Moisten a cotton swab with a household degreaser or cleaner and clean
the grooves around the switches. Immediately dry all surfaces.
5. Polish with a soft cloth.
18
TROUBLESHOOTING
Automatic Overload Protection
Your Vitamix machine is equipped with a special feature: Automatic Overload
Protection. This built-in feature is designed to protect the motor and prevent your
machine from overheating. When engaged, this Automatic Overload Protection will
cause the motor to shut off and possibly emit a light odor.
If your Automatic Overload Protection should ever be activated, refer to
page 8 in this manual to easily reset your machine.
Tips to prevent “overloading” your Vitamix machine:
• Process only Vitamix recipes when learning to use the machine
• Do not process recipes at lower speeds than recommended
• Do not process recipes at higher speeds than recommended
• Do not process recipes longer than recommended
• Use your tamper to process thicker mixtures and keep ingredients
moving around and through the blades
Retainer Nut Loosening
In the event that the retainer nut at the bottom of your container loosens and no
longer securely holds the blade assembly in place, DO NOT CONTINUE TO USE THE
CONTAINER. Call Vitamix Customer Service at 1-800-848-2649 or 1-440-235-4840,
or your local dealer immediately for instructions.
19
WARRANTY
7-Year Full Machine Warranty
1. Product Registration.
Vita-Mix® Corporation (“Vitamix”) strongly encourages you to register your
purchase by completing and returning the product registration card that came
with this Machine. You can register online at vitamix.com/warranty; or by calling
our Customer Service Department at 1-800-848-2649 or 1-440-235-4840. Failure
to register your product purchase will not diminish your warranty rights. However,
registering your purchase will allow Vitamix to better serve you with any of your
customer service needs.
2. Who Can Seek Warranty Coverage.
This Warranty is extended by Vitamix to the owner of this Machine for personal
household use only. This Warranty does not apply to products used for commercial,
rental or re-sale purposes. Should ownership of the machine change during the 7-year
period, please update the Machine’s owner information at vitamix.com/warranty.
3. What is Covered.
Vitamix warrants to the owner that if this Machine (a “Machine” consists of a motor
blender base and any containers purchased together) fails within 7 years from
the date of purchase due to a defect in material or workmanship or as a result of
normal wear and tear from ordinary household use, Vitamix will, within 30 days of
receipt of the returned product, repair the failed Machine or component part of the
Machine free of charge.
If, in Vitamix’s sole discretion, the failed Machine or component part of the Machine
cannot be repaired, Vitamix will elect to either (A) replace the Machine free of
charge or (B) refund the full purchase price to the owner, unless Vitamix receives
prior written notice of the owner’s preference.
4. What is Not Covered.
This Warranty does not apply to Machines that have been used commercially or
in non-household applications. This Warranty does not cover cosmetic changes
that do not affect performance, such as discoloration or the effects of the use of
abrasives or cleaners or food build up. This Warranty is only valid if the Machine is
used and maintained in accordance with the instructions, warnings and safeguards
contained in the owner’s manual.
Vitamix will not be responsible for the cost of any unauthorized warranty repairs.
REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE ARE THE
EXCLUSIVE REMEDIES OF PURCHASER AND THE SOLE LIABILITY OF VITAMIX
UNDER THIS WARRANTY. NO EMPLOYEE OR REPRESENTATIVE OF VITAMIX IS
AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR ANY MODIFICATION
TO THIS WARRANTY WHICH MAY BE BINDING UPON VITAMIX. ACCORDINGLY,
PURCHASER SHOULD NOT RELY UPON ANY ADDITIONAL STATEMENTS
MADE BY ANY EMPLOYEE OR REPRESENTATIVE OF VITAMIX. IN NO EVENT,
WHETHER BASED ON CONTRACT, INDEMNITY, WARRANTY, TORT
20
WARRANTY
(INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, SHALL VITAMIX
BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFIT OR REVENUE.
Some states do not allow limits on warranties. In such states, the above limitations
may not apply to you. Outside the U.S.A. and Canada, other warranties may apply.
5. What Voids this Warranty.
Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal
or extreme conditions, or failure to follow the operating instructions will void
this Warranty.
The Warranty is also void if repairs to the Machine or any component part of the
Machine are performed by someone other than either Vitamix or an authorized
Vitamix Service Provider or if any component part of a Machine subject to this
Warranty is used in combination with a motor base or container that is not
expressly authorized by Vitamix.
6. How to Obtain Return Authorization Under This Warranty.
In the event that the Machine or any component part of the Machine needs
service or repair, please call Vitamix Customer Service at 1-800-848-2649 or
1-440-235-4840. You will be asked to provide a date of purchase and proof of
purchase for any product that has not been registered with Vitamix. For product
subject to this Warranty you will be provided with a return authorization number,
up-to-date shipping instructions and a pre-paid return pick up label. Vitamix will
pay standard shipping costs on the return of a Machine or component part for
warranty service and repair and for return shipment of the product to you after
the warranty repair or replacement. Purchaser is responsible for the costs of
special shipping requests.
Within the U.S.A. and Canada, this Warranty is honored directly through the
Vita-Mix® Corporation.
United States
Vita-Mix® Corporation
8615 Usher Road
Cleveland, Ohio 44138-2199
1-800-848-2649
service@vitamix.com
You will be deemed to have accepted the returned product “as is” upon delivery
unless you notify Vitamix of any problem, including shipment damage, within
48 hours of delivery.
Special International Instructions
If a machine was purchased within the U.S.A. or Canada, but is currently outside
the U.S.A. or Canada, all shipping and resulting taxes and duties are at the owner’s
expense. Call +1-440-235-4840 or email service@vitamix.com for more details.
Canada
Vita-Mix® Corporation
200-1701 Shepherd Street East
Windsor, Ontario N8Y 4Y5
1-800-848-2649
service@vitamix.com
21
SPECIFICATIONS
Professional Series 750™
Motor:
≈ 2.2 peak output horsepower motor
Electrical:
120 V, 50 / 60 Hz, 12 A
Uses a U.S.A. three–prong grounded cord
Dimensions:
Height: 17.4 in. / 44,2 cm
Width: 7.7 in. / 19,6 cm
Depth: 9.4 in. / 23,9 cm
When applicable:
To see the complete line of Vitamix® products,
visit vitamix.com.
Vita-Mix® Corporation
8615 Usher Road
Cleveland, OH 44138-2103 U.S.A.
1-800-848-2649 / 1-440-235-4840
vitamix.com
©2013 Vita-Mix
in any form or by any means or stored in a database or retrieval system without the written
permission of the Vita-Mix® Corporation.
Printed in the U.S.A.
®
Corporation. No part of this publication may be reproduced or transmitted
104042 3/13
Loading...