Let’s Get Started ...............................................................................................................................................3
Service & Registration .....................................................................................................................................4
Important Safeguards .....................................................................................................................................5
Parts & Features ................................................................................................................................................ 7
Control Panel ......................................................................................................................................................9
About The Blades ........................................................................................................................................... 10
How To Use The Tamper ...............................................................................................................................12
Hints For Setting Speeds ..............................................................................................................................13
Care And Cleaning ......................................................................................................................................... 16
You are about to see how quick, easy, and delicious healthy eating can be!
Please read all the safety information, warnings, and instructional material found in this booklet before
getting started. Set your Vitamix machine on a dry, level surface. Make sure that the power switch is set
to Off, and that the machine is plugged into a grounded electrical outlet. Then, follow the cleaning
instructions on page 16 to prepare your machine for use. Always clean your machine before the first use.
3
SERVICE AND REGISTRATION
Vitamix Service
Record the model number and serial number of your Vitamix in the spaces provided below for future reference.
These numbers can be found on the back of the motor base.
Model Number
Serial Number
Date of Purchase
Purchased From
Before returning this product for any reason, including repair, first contact Vitamix Customer Service at
1-800-848-2649 or 1-440-235-4840, email service@vitamix.com, or contact your local dealer.
Product Registration
If you purchased your Vitamix® machine directly from the Vita-Mix® Corporation via the company’s website or call
center by phone, your product was registered at the time of purchase and your Vitamix machine’s warranty has
been activated.
If you purchased your Vitamix machine from an International Distributor or Dealer in countries other than the
United States, Canada, United Kingdom, or Ireland, your product is warranted through the International Distributor
or Dealer and need not be registered with the Vita-Mix Corporation.
Your machine is not yet registered with Vitamix if you:
1. Purchased from a Dealer in the United States, Canada, United Kingdom, or Ireland
2. Purchased from a military base
3. Purchased from a retail or wholesale store
4. Received your Vitamix machine as a gift
5. Are not the original owner of the machine
Enjoy faster and easier service in the future by taking a few minutes to register your Vitamix machine today.
Choose one of these easy ways to register your machine:
1. Online at vitamix.com/warranty
2. Email service@vitamix.com
3. Call 1-800-848-2649 or 1-440-235-4840, press option 2
Your warranty may be honored by Vita-Mix® Corporation or an authorized dealer.
Failure to register your machine will not diminish your warranty rights.
4
IMPORTANT SAFEGUARDS
WARNING: To avoid the risk of serious injury when using your Vitamix® blender, basic safety
precautions should be followed, including the following.
READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS
BEFORE OPERATING BLENDER.
1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical, sensory, or mental
capabilities or lack of experience and knowledge. Close supervision is necessary when any appliance is
used by or near children or incapacitated persons.
3. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Call Vitamix Customer Service at 1-800-848-2649 or
1-440-235-4840 or email service@vitamix.com at once for examination, repair, replacement, or
electrical or mechanical adjustment. If purchased outside the U.S.A. or Canada, contact your local
Vitamix dealer.
7. Alteration or modification of any part of the blender base or container, including the use of any part or
parts that are not genuine authorized Vitamix parts, may cause fire, electric shock, or injury.
8. The use of attachments not expressly authorized or sold by Vitamix for use with this blender, including
canning jars, may cause fire, electric shock, or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surface, including the stove.
12. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons
or damage to the blender. A rubber scraper or spatula may be used, but only when the Vitamix blender
is not running.
13. The tamper provided must be used only when the main part of the lid is in place.
14. Blades are sharp. Handle or remove blade and blade assembly from the container with extreme care
to avoid injury. To reduce the risk of injury, never place a blade assembly on the motor base unless
assembled to the Vitamix container.
15. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will
damage the blades and other components when starting the machine and may cause injury.
16. Never attempt to operate with damaged blades.
5
IMPORTANT SAFEGUARDS
17. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when
adding ingredients and when using the tamper.
18. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding
and burns. Do not fill container to the maximum capacity. Always begin processing on the lowest
speed setting, variable speed 1. Keep hands and other exposed skin away from the lid opening to
prevent possible burns.
19. When making nut butters or oil-based foods, do not process for more than one minute after the
mixture starts to circulate in the container. Processing for longer periods can cause dangerous
overheating.
SAVE THESE INSTRUCTIONS
WARNING
To Avoid Injury.
Read and understand instruction manual
before using this machine.
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not intended to be used for
commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair, servicing, or the replacement of parts must be performed by Vitamix or an authorized
service representative.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death
or electrical shock.
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND THE IMPORTANT
INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX BLENDER THAT CAN VOID YOUR
WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.
6
PARTS AND FEATURES
On/Off Switch:
with the High/Variable switch in the
Variable ( ) position and the Variable Speed
Dial pointed to 1.
Always start the machine
Lift the On/Off Switch to the
On position (|) to begin blending. Press the
switch to the Off position (O) to stop blending.
High/Variable Switch: Variable ( ) allows
use of the Variable Speed Dial. High ( ) is the
fastest speed available.
Variable Speed Dial: The Variable Speed Dial
selects blade rotation speeds from 1 to 10
(low to high).
Container: Ounces, cups, and milliliters are
clearly marked.
CAUTION: Lids and tampers are not
interchangeable between different container
styles, types, and sizes.
2-Part Lid: The 2-part Lid is easy to put on and
take off and easy to clean. Always use the lid
and the lid plug during blending.
Snap the lid onto the container and leave in
place for a few minutes. Once the lid has been
left on the container, it will be much easier to
lock or remove.
Lid Plug: Insert through the lid and secure by
turning clockwise. Remove the lid plug to use
the tamper or add ingredients.
Tamper: The tamper allows you to accelerate
the process of very thick and/or frozen
mixtures that cannot be processed in a regular
blender. Using the tamper maintains circulation
by preventing air pockets from forming during
blending.
Lid Plug
2-Part Lid
Lid Flaps
Container
Blade Assembly
Retainer Nut
Centering Pad
Drive Socket
High/Variable Switch
Variable Speed Dial
On/Off Switch
Motor Base
Feet
Tamper
7
PARTS AND FEATURES
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
To Lock the Lid in Place: Position lid on container with lid flaps midway between the spout and the handle.
Push the lid onto the container until it locks in place. The lid must always be secured when processing,
especially hot liquids that may scald. Never operate the blender without checking to make sure the lid is
securely locked in place.
To Remove the Lid: Lift up on one lid flap while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked” to “unlocked” position and
lift out.
Automatic Overload Protection: Your Vitamix motor is
designed to protect itself from overheating. If the motor shuts
off, follow these instructions:
Turn off the power switch for up to 45 minutes to reset. Reset
time will be extended if high room temperatures exist. To
reduce the reset time, unplug the machine, remove the container, and blow air into the center section of the bottom with a
hair dryer on the cool setting.
Front
Power Cord: Your machine is equipped with a long power cord.
Store the unused portion neatly underneath.
Bottom View / Cord Wrap: Plastic cord retainers hold the cord
securely. There is no need to unscrew the cord retainers to let
out more cord. They are flexible, and return to position after the
cord is lifted out.
8
Back
CONTROL PANEL
2
1. On/Off Switch: Push up to turn On (|). Push down to turn Off (O).
2. High/Variable Switch: High the variable speeds. Always make sure that the High/Variable Switch is set to Variable ( )
before lifting the On/Off Switch to the On (|) position. Do not start your machine on High
3. Variable Speed Dial: Selects many speed settings. It is active only when the High/Variable Switch
is set in the Variable ( ) position.
( )
is the fastest speed available. Switch to Variable ( ) to activate
3
1
( )
speed.
9
W
ABOUT THE BLADES
The Vitamix machine comes standard with the wet blade container. The blade is identified by a “W” for
wet. This blade is used for most of your recipes. Additional containers with wet or dry blades may be
purchased separately.
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
Wet Blade Container: Designed for processing liquids, including juice, frozen mixtures,
sauces, soups, purees, batters, and for wet chopping. The wet blades can also grind grain
W
D
and knead dough, but they are not quite as efficient as the dry blades in this application.
If used for grinding, your container will mar and become cloudy; see instructions for dry
container use.
Dry Blade Container: These blades are clearly marked “D” and are designed specifically
for grinding dry materials such as grains, cereal, and coffee, and are also used for
kneading bread dough. The dry blades can NOT process liquids efficiently. If you grind
herbs on a regular basis, you may wish to purchase a separate dry blade container.
CAUTION
Moving Parts
May Become
Hot With
Extended
Use.
DO NOT touch.
10
TAMPER
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between different
container styles, types, and sizes.
supplied with your machine.
How to Determine the Tamper that Can Be Used with Your Container
Each type of tamper is designed to be used safely and effectively with a particular container. If a tamper
came with your container, it is the correct tamper for the container. If a tamper did not come with your
container, or you want to determine if a tamper that you already have can be used with your new container,
please compare your container with the containers and matching tampers to the illustration below.
Before using the tamper during the blending process, verify that it is the correct tamper.
Use the tamper that was
• 64 oz. Short Containers use Tamper P/N 016041 that is approximately 9-3/4 inches long.
• 64 oz. Tall Containers uses Tamper P/N 000760 that is approximately 12-1/2 inches long.
• 32 oz. and 48 oz. Containers use Tamper P/N 015033 that is approximately 11 inches long.
To verify that you are using the correct tamper, place the lid on an empty container, remove the lid plug and
insert the tamper. If it is the correct tamper it should easily fit into the opening but will not come in contact
with the blades no matter how you move the tamper inside the container. IF THE TAMPER TOUCHES THE
BLADES AT ANY ANGLE - DO NOT USE THE TAMPER WITH YOUR CONTAINER.
If you do not have the correct tamper for your container, call Vitamix Customer services at 1-800-848-2649 or
1-440-235-4840 or e-mail service@vitamix.com to order a new tamper. If purchased outside the United States
or Canada, contact your local Vitamix Dealer.
11
HOW TO USE THE TAMPER
WARNING
Rotating Blades Can
Cause Severe Injury.
• DO NOT put hands, spatulas, etc. in
the container while the machine is
running or while the container is still
on the base.
• Lids and tampers are not
interchangeable between different
container styles, types, and sizes.
Use the tamper that was supplied
with your machine.
IMPORTANT:
• The splash disk (near the top of the tamper) and lid
prevent the tamper from hitting the blades when the
lid is secured properly in the locked position.
• The container should not be more than two-thirds full
when the tamper is used during blending.
• To avoid overheating during blending, DO NOT use the
tamper for more than 30 consecutive seconds.
• If the food does not circulate, the machine may have
trapped an air bubble. Carefully remove the lid plug
while making sure the lid stays firmly in place. Release
the air bubble by inserting the tamper through the lid
plug opening.
• Holding the tamper straight down may not help the
ingredients circulate. If necessary, point the tamper
toward the sides or corners of the container. DO NOT
try to force the tamper deeper into the container.
Tamper
Tamper Splash Disk
Lid
Blade Assembly
12
HINTS FOR SETTING SPEEDS
To minimize splatter,
the center Variable Speed Dial pointed at 1. Do not begin processing on Variable 10 or directly on the
( )
High
Activate the machine by turning the On/Off Switch to On (|) and slowly turn the Variable Speed Dial to the
desired speed depending on the recipe used. If a recipe calls for processing on High
Variable Speed Dial to 10 and then push the High/Variable Switch up into the High
Process on the High
soups, shakes, frozen mixtures, purées, nut butters and for grinding grains. Processing times will generally
be less than one minute (most take less than 30 seconds). High
of refinement, breaking down ice, frozen fruit, whole fruits or vegetables, and grains to a smooth
lump-free consistency.
TIP: Blending too long at too low a speed setting will overheat the machine and cause the Automatic
Overload Protection to turn the machine off. Use the High
most uniform consistency. Blending on High
avoid overheating.
When on High
an air bubble. Carefully remove the lid plug while making sure the lid stays firmly in place. Release the air
bubble by inserting the tamper through the lid plug opening. If circulation problems continue, reduce the
machine speed. A lower speed may allow food to circulate when a higher speed does not. Once the food is
circulating freely, increase the speed back to High
setting.
always start with the High/Variable Switch in the Variable ( ) position and with
( )
, slowly rotate the
( )
position.
( )
setting for as much of the processing time as possible to make whole food juices,
( )
speed provides the best quality
( )
speed as often as possible to achieve the
( )
speed also maximizes the motor’s cooling fan to
( )
, if the food does not circulate, the machine may be overloaded or may have trapped
( )
and continue processing.
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents,
lock the lid and lid plug
securely in place prior to operating the machine.
Always start on Variable 1, slowly increase to 10.
13
OPERATING INSTRUCTIONS
Wet Blade Container
Designed for processing liquids including juice, frozen mixtures, sauces, soups, purees, batters, and for
wet chopping.
1. Make sure that the Variable Speed Dial is set to 1
2. Load the container before placing it on the motor base. Place liquids and soft foods in the container
first, solid items and ice last. Although not necessary for blending, you may want to cut or break food
into smaller pieces for more precise measuring of ingredient
3. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending (unless the tamper is
inserted through the lid plug opening). Especially when blending hot ingredients, make sure the lid is
securely latched.
4. With the motor off, set the wet blade container on the motor base by aligning it over the centering pad.
Do not attempt to put a container on an operating motor base or to operate a motor base without a
container properly in place
5. Always start with the High/Variable Switch in the Variable ( ) position and with the center Variable
Speed Dial pointed at 1. Do not begin processing on Variable 10 or directly on the High
Activate the machine by turning the On/Off Switch to On (|) then slowly turn the Variable Speed Dial to
the desired speed depending on the recipe used. If a recipe calls for processing on High
rotate the Variable Speed Dial to 10 and then push the High/Variable Switch up into the High
position.
6. Take proper care when handling and processing hot ingredients and making hot soups and sauces
.
.
s.
( )
setting.
( )
, slowly
( )
.
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents,
lock the lid and lid plug
securely in place prior to operating the machine.
Always start on Variable 1, slowly increase to 10.
7. Due to the machine’s speed, processing times are much quicker than standard appliances. Until you are
accustomed to the machine, count your time carefully to avoid over processing
8. After turning the machine off, wait until the blades completely stop before removing the lid or container
from the motor bas
14
e.
.
OPERATING INSTRUCTIONS
Dry Blade Container
If purchased, your dry blade container should only be used for hard, dry materials such as grain, and for
kneading dough.
1. Make sure that the Variable Speed Dial is set to 1.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending (unless the tamper is
inserted through the lid plug opening).
3. With the motor off, set the dry blade container on the motor base by aligning it over the centering pad.
Do not attempt to put a container on an operating motor base or to operate a motor base without a
container properly in place.
4. Always start with the High/Variable Switch in the Variable ( ) position and with the center Variable
Speed Dial pointed at 1. Do not begin processing on Variable 10 or directly on the High
Activate the machine by turning the On/Off Switch to On (|) then slowly turn the Variable Speed Dial to
the desired speed depending on the recipe used. If a recipe calls for processing on High
rotate the Variable Speed Dial to 10 and then push the High/Variable Switch up into the High
position.
5. After turning the machine off, wait until the blades completely stop before removing the lid or container
from the motor base.
6. Due to the machine’s speed, and the sometimes-short processing times, count your time carefully to
avoid over-processing
7. Grinding dry material for more than two minutes could damage your machine. Regular use may result in
cosmetic marring of the container and cause the blades to become dull over time
8. Grinding some herbs may release oils, causing the container to discolor permanently. Others have strong
odors that may linger in the container, affecting the flavor of other foods. The grinding of some herbs
and spices may also cause the blade to dull over time, or the container to crack.
.
( )
setting.
( )
, slowly
( )
.
15
CARE AND CLEANING
Container
To prepare your new machine for initial use, follow the steps under Normal Cleaning below. This will clean the
unit, and break-in the motor.
Normal Cleaning:
1. Fill the container half full with warm water and add a couple drops of liquid dish washing detergent to
the container.
2. Snap or push the complete 2-Part lid into locked position.
3. Select variable speed 1. Turn machine on and slowly increase speed to variable speed 10, then to High.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
To Sanitize:
1. Follow Normal Cleaning instructions above.
2. Fill the container half full with water and 1 1/2 teaspoons of liquid bleach.
3. Snap or push the complete 2-Part lid into locked position.
4. Select variable speed 1. Turn machine on and slowly increase speed to variable speed 10, then to High.
5. Run the machine on High speed for 30 to 60 seconds.
6. Turn off the machine, and allow mixture to stand in the container for an additional 1 1/2 minutes.
7. Pour bleach mixture out. Allow container to air dry.
8. Do not rinse after sanitizing.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash the parts in warm soapy water. Rinse clean under running water, and dry.
Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the container, lid, lid plug or tamper in the dishwasher.
16
CARE AND CLEANING
Motor Base:
1. Unplug the power cord.
WARNING
Electrical Shock Hazard.
Disconnect power before
cleaning machine.
Failure to follow instructions can
cause death or electrical shock.
2. Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution
of liquid detergent and warm water. Do not place the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so they work freely. They may become sticky from use. Moisten a
cotton swab with a household degreaser or cleaner and clean the grooves around the switches.
Immediately dry all surfaces.
5. Polish with a soft cloth.
17
TROUBLESHOOTING
Automatic Overload Protection
Your Vitamix machine is equipped with a special feature: Automatic Overload Protection. This built-in
feature is designed to protect the motor and prevent your machine from overheating. That means peace
of mind for you as a Vitamix owner. When engaged, this Automatic Overload Protection will cause the
motor to shut off and possibly emit a light odor.
If your Automatic Overload Protection should ever be activated, refer to page 8 in this manual to easily
reset your machine.
Tips to prevent “overloading” your Vitamix machine:
• Process only Vitamix recipes when learning to use the machine
• Do not process recipes at lower speeds than recommended
• Do not process recipes at higher speeds than recommended
• Do not process recipes longer than recommended
• Use your tamper to process thicker mixtures and keep ingredients moving around and
through the blades
Retainer Nut Loosening
In the event that the retainer nut at the bottom of your container loosens and no longer securely holds the
blade assembly in place, DO NOT CONTINUE TO USE THE CONTAINER. Call Vitamix Customer Service at
1-800-848-2649 or 1-440-235-4840, or your local dealer immediately for instructions.
18
WARRANTY
7-Year Full Machine Warranty
1. PRODUCT REGISTRATION.
Vita-Mix® Corporation (“Vitamix”) strongly encourages you to register your purchase by completing
and returning the product registration card that came with this Machine. You can register online at
www.vitamix.com/warranty; or by calling our Customer Service Department at 1-800-848-2649 or
1-440-235-4840. Failure to register your product purchase will not diminish your warranty rights. However,
registering your purchase will allow Vitamix to better serve you with any of your customer service needs.
2. WHO CAN SEEK WARRANTY COVERAGE.
This Warranty is extended by Vitamix to the owner of this Machine for personal household use only. This
Warranty does not apply to products used for commercial, rental or re-sale purposes. Should ownership
of the machine change during the 7-year period, please update the Machine’s owner information at
www.vitamix.com/warranty.
3. WHAT IS COVERED.
Vitamix warrants to the owner that if this Machine (a “Machine” consists of a motor blender base and any
containers purchased together) fails within 7 years from the date of purchase due to a defect in material or
workmanship or as a result of normal wear and tear from ordinary household use, Vitamix will, within 30 days
of receipt of the returned product, repair the failed Machine or component part of the Machine free of charge.
If, in Vitamix’s sole discretion, the failed Machine or component part of the Machine cannot be repaired,
Vitamix will elect to either (A) replace the Machine free of charge or (B) refund the full purchase price to the
owner, unless Vitamix receives prior written notice of the owner’s preference.
4. WHAT IS NOT COVERED.
This Warranty does not apply to Machines that have been used commercially or in non-household
applications. This Warranty does not cover cosmetic changes that do not affect performance, such as
discoloration or the effects of the use of abrasives or cleaners or food build up. This Warranty is only valid if
the Machine is used and maintained in accordance with the instructions, warnings and safeguards contained
in the owner’s manual.
Vitamix will not be responsible for the cost of any unauthorized warranty repairs.
REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE ARE THE EXCLUSIVE REMEDIES OF
PURCHASER AND THE SOLE LIABILITY OF VITAMIX UNDER THIS WARRANTY. NO EMPLOYEE OR
REPRESENTATIVE OF VITAMIX IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR ANY
MODIFICATION TO THIS WARRANTY WHICH MAY BE BINDING UPON VITAMIX. ACCORDINGLY,
PURCHASER SHOULD NOT RELY UPON ANY ADDITIONAL STATEMENTS MADE BY ANY EMPLOYEE OR
REPRESENTATIVE OF VITAMIX. IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY, WARRANTY,
TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION,
LOSS OF PROFIT OR REVENUE.
Some states do not allow limits on warranties. In such states, the above limitations may not apply to you.
Outside the U.S.A. and Canada, other warranties may apply.
19
WARRANTY
5. WHAT VOIDS THIS WARRANTY.
Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal or extreme conditions, or
failure to follow the operating instructions will void this Warranty.
The Warranty is also void if repairs to the Machine or any component part of the Machine are performed by
someone other than either Vitamix or an authorized Vitamix Service Provider or if any component part of a
Machine subject to this Warranty is used in combination with a motor base or container that is not expressly
authorized by Vitamix.
6. HOW TO OBTAIN RETURN AUTHORIZATION UNDER THIS WARRANTY.
In the event that the Machine or any component part of the Machine needs service or repair, please call
Vitamix Customer Service at 1-800-848-2649 or 1-440-235-4840. You will be asked to provide a date of
purchase and proof of purchase for any product that has not been registered with Vitamix. For product
subject to this Warranty you will be provided with a return authorization number, up-to-date shipping
instructions and a pre-paid return pick up label. Vitamix will pay standard shipping costs on the return of a
Machine or component part for warranty service and repair and for return shipment of the product to you
after the warranty repair or replacement. Purchaser is responsible for the costs of special shipping requests.
Within the U.S.A. and Canada, this Warranty is honored directly through the Vita-Mix® Corporation.
United StatesCanada
You will be deemed to have accepted the returned product “as is” upon delivery unless you notify Vitamix of
any problem, including shipment damage, within 48 hours of delivery.
20
SPECIAL INTERNATIONAL INSTRUCTIONS
If a machine was purchased within the U.S.A. or Canada, but is currently outside the U.S.A.
or Canada, all shipping and resulting taxes and duties are at the owner’s expense.
Call +1-440-235-4840 or email service@vitamix.com for more details.