PROEL Xeos, Xeos XE35T, Xeos XE55T, Xeos XE65T User Manual

USER’S MANUAL

MANUALE UTENTE

proelgroup.com

2

FIG. 1

speaker max rotation

170mm

[6.7"]

speaker max rotation

192mm

[7.6"]

speaker max rotation

230mm

[9.1"]

200mm

[7.9"]

243mm

[9.6"]

290mm

[11.4"]

130mm

[5.1"]

182mm

[7.2"]

220mm

[8.7"]

100mm

[3.9"]

163mm

[6.4"]

196mm

[7.7"]

fix screw max

Ø10mm

[Ø0.4"]

fix screw max

Ø10mm

[Ø0.4"]

wires max

Ø14mm

[Ø0.6"]

screw

Ø6mm

[Ø0.2"]

screw

Ø6mm

[Ø0.2"]

wires

Ø8mm

[Ø0.3"]

fix screw max

Ø10mm

[Ø0.4"]

wires max

Ø14mm

[Ø0.6"]

fix screw max

Ø10mm

[Ø0.4"]

XE35T

NOTE: the drill drawing shown is for vertical mounting

Always check that the fixing plugs choosen are suitable to the type of wall
and that they can hold up the weight of the speaker safely.
Recommended screws for the fixing plugs are:
Ø 6mm [1/4"] for XE35T
Ø 8mm [5/16"] for XE55T
Ø 10mm [13/32"] for XE65T

XE55T XE65T

WALL DRILLING - FORATURA MURO

NOTA: il disegno della foratura è per il montaggio verticale

Accertarsi sempre che i tasselli scelti siano adatti al tipo di parete e siano
in grado di sostenere il peso dell'altoparlante in sicurezza.
Le viti raccomandate per i tasselli sono:
Ø 6mm per XE35T
Ø 8mm per XE55T
Ø 10mm per XE65T

speaker max rotation

360mm

[14.2"]

speaker max rotation

338mm

[13.3"]

182mm

[7.2"]

screw

Ø6mm

[Ø0.2"]

screw

Ø6mm

[Ø0.2"]

49mm

[1.9"]

XE55T

WALL DRILLING - SNBK or SNWH optional accessory
FORATURA MURO - accessorio opzionale SNBK o SNWH

65mm

[2.6"]

243mm

[9.6"]

max horizontal aiming rotation is 90° left or right
max vertical aiming rotation is 25° down and 12° up

This accessory can be used
only for XE55T model.

Questo accessorio può essere usato
solo per il modello XE55T.

3

FIG. 2 - 3 - 4

100 / 70 V line

AUP240L

The TOTAL POWER of all the speakers must be less or equal

to the power of the amplifier.

La SOMMA delle potenze degli altoparlanti deve essere

inferiore o uguale alla potenza dell’amplificatore.

CONSTANT VOLTAGE LINE

LOW IMPEDANCE SYSTEM

++-+- +-+-

-

+-+-

+

-

+

-

LLRR

ACDT90V

(for other AVL equipment see AVL system

catalogue at proelgroup.com)

(for other AVL equipment see AVL system

catalogue at proelgroup.com)

Speakers and amplifier power capability must be

approximately the same for the specified impedance.

Altoparlanti e amplificatore devono avere approssimativamente

la stessa potenza per l’impedenza specificata.

RED / ROSSO BLACK / NERO

RED / ROSSOBLACK / NERO

RED / ROSSOBLACK / NERO