Prodipe M850 DSP Solo, B210 DSP Solo, M850 DSP Duo, B210 DSP, B210 User Manual
...
Prodipe DSP UHF systems and microphones
M850 DSP
Solo
UHF
M850 DSP
Duo UHF
B210 DSP
Solo
UHF
B210 DSP
Duo UHF
DSP M850 Solo/Duo UHF Microphones
DSP B210 Solo/Duo UHF Voice and Instrument Systems
User Manuel:
M850 DSP Solo / M850 DSP Duo / B210 DSP Solo / B210 DSP Duo / B210 DSP Headset / B210 Lavalier tie-clip
microphone
Safety Information
This logo indicates that the product can be recycled after it has been used. Please do not dispose of the product
with your normal household waste. Return the product to the shop where you purchased it or place it in the
designated recycling container.
Thank you for purchasing this digital appliance. To ensure perfect operation and security, please read
the manual carefully and retain it for future reference. This manual can be downloaded from our site.
CAUTION
Risk of electric shock
Do not open!
Precautions
The lightning flash with the arrowhead symbol in an equilateral triangle is intended to alert the user to the presence of noninsulated “dangerous voltage” inside the appliance that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
Important Instructions
1) Read these instructions.
2) Retain these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this appliance near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings that were installed in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the plug provided does not fit into your outlet,
consult an electrician to ensure replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where it exits from the appliance.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
appliance. If using a cart, be careful when moving the cart/appliance combination to avoid injury from tip over (Figure 1).
13) Unplug this appliance during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged
in any way, for example, the power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen inside the appliance, the appliance has been exposed to rain or moisture, does not operate normally,
or has been dropped.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: The appliance should not be exposed to drips or splashes of water. Objects filled with liquids, such as vases, should
not be placed on the appliance.
Contents
Contents ............................................................................................... 1
1 – Introduction ..................................................................................... 2
2 – Declarations of conformity ................................................................. 2
3 – DSP (Digital Signal Processor) Module ................................................. 2
4 – Receiver functions and features .......................................................... 3
5 – Transmitter functions and features ...................................................... 4
6 – Configuration of transmission channels ................................................ 5
7 – Use ................................................................................................. 7
8 – General characteristics of DSP UHF ..................................................... 7
9 – Connections ..................................................................................... 8
10 – Precautions during use and guarantee ............................................... 9
11 – Technical specifications .................................................................. 10
12 – Table of frequencies ...................................................................... 11
1 – Introduction
This wireless microphone and bodypack system uses highly stable Phase-Locked Loop (PLL)
technology to eliminate unexpected disconnections. The power consumption of the microphone
transmitter and receiver have been calculated very precisely to ensure good battery life. Every
product is subject to strict controls by our quality department before it is offered for sale.
Safety Precautions
To ensure both your safety and the trouble-free operation of this product, please read
carefully the safety precautions on page 2 of this manual.
Important: to reduce the risks of electric shock, do not remove the rear panel of this
product. For any maintenance issues, please contact your dealer or a qualified technician.
2 – Declarations of conformity
These appliances conform with the essential requirements of European directive RED 2014/53/EU*.
Before using this appliance, please observe the legal stipulations applicable in your country. This radio
equipment is intended for use at professional spectacles, other similar applications and as auxiliary
radio broadcasting equipment.
*See declarations of conformity at www.prodipe.com
3 – DSP (Digital Signal Processor) Module
The DSP (Digital Signal Processor) technology of our UHF equipment provides very high levels of
stability in UHF signals. The extremely precise digital processing of UHF frequencies offers stable
performance in all circumstances and environments.
The electronic system of this DSP module is designed to resist any interference which may occur while
it is in use, guaranteeing the integrity of the signal at all times.
Voice and instrument sound using Prodipe DSP UHF will be as close as possible to wire transmission
quality.
Actual product(s) may differ from illustrations/photographs used
Copyright © 2017 IPE Music / Prodipe
4 – Receiver functions and features
1- Front panel:
1. "POWER" supply button: off/on.
2. Configuration "SET" button: receiver menu.
3. "UP" button: switch to next higher channel.
4. "DOWN" button: switch to next lower channel.
5. Reception and cell tell-tale light [IR].
6. LCD display.
7. Audio output volume control(s).
2- Rear panel:
1. Balanced mono audio output XLR (track B on Duo versions).
2. MIX OUT (tracks A+B) unbalanced mono audio output 6.35mm jack (Duo versions).
Unbalanced mono audio output 6.35mm jack (Solo versions).
3. Balanced mono audio output XLR (track A on Duo versions).
Balanced mono audio output XLR (main track on Solo versions).
4. Power supply connection ( 12-18V DC).
5. BNC antenna input (Solo versions).
6. BNC second antenna input (Duo versions).
Actual product(s) may differ from illustrations/photographs used
Copyright © 2017 IPE Music / Prodipe
Loading...