3
2
This appliance is intended for household use only.
WARNING! Shock Hazard: This appliance has a polarized plug (one
wide blade) that reduces the risk of electric shock. The plug fits only
one way into a polarized outlet. Do not defeat the safety purpose of
the plug by modifying the plug in any way or by using an adapter. If
the plug does not fit, reverse the plug. If it still does not fit, have an
electrician replace the outlet.
BEFORE FIRST USE: Wash blade portion of hand blender
according to instructions.
CONSUMER SAFETY INFORMATION
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be observed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put motor end,
cord, or plug in water or other liquid.
3. This appliance should not be used by children and care should
be taken when used near children.
4. Avoid contact with moving parts. Keep hands, hair, and clothing,
as well as other utensils away from blades and out of container
during operation to prevent the possibility of severe injury to
persons and/or damage to the appliance. A spatula or scraper
may be used when the appliance is not in operation.
5. The use of attachments not recommended or sold by the appliance manufacturer for use with this model may cause fire, electric shock, or injury.
6. When mixing liquids, especially hot liquids, use a tall container
and make several small batches to avoid spillage.
7. Blades are sharp; handle carefully.
8. Do not use over a stove or other heat source.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surface, including the stove.
12. Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
13. Do not operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, or is dropped or damaged
in any manner. Call our toll-free customer service number
for information on examination, repair, or electrical or mechanical
adjustment.
1. Speed Control
2. Motor Housing
3. MAX Line (on back)
4. Shaft
5. Blade and Blade Guard
SAVE THESE INSTRUCTIONS
Parts and Features
840096002 ENv03.qxd:840096000 Ev00.qxd 6/14/10 4:34 PM Page 2