Proctor-Silex 17300, 17300D Use And Care Manual

840091500
Use & Care for Steam Irons ................................2
USA: 1-800-851-8900 — We invite you to carefully read this instruction manual before using your appliance.
Utilisation et entretien des fers ............................7
Au Canada : 1-800-267-2826 — Nous vous invitons à lire attentivement ces instructions avant d’utiliser votre appareil.
En México: 01-800-71-16-100 — Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato.
840091500 Ev01.qxd 1/8/02 10:37 AM Page 1
32
When using your flat iron, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Use iron only for its intended use.
2. Verify that the voltage in your home corresponds to that of your
appliance.
3. To protect against risk of electric shock, do not immerse the iron in water or other liquids.
4. The iron should always be turned to OFF before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.
6. Always disconnect iron from electrical outlet when filling with water or emptying and when not in use.
7. Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer service number for information on examination, repair or electrical or mechanical adjustment. Incorrect reassembly can cause a risk of electric shock when the iron is used.
8. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
9. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir.
IMPORTANT SAFEGUARDS
1. Water Tank Opening
2. Adjustable Steam Dial
3. Spray Button
(optional)
4. Pivoting Cord
5. Heel Rest
6. Temperature Control Dial
7. Power On Light
8. Soleplate
9. Water Window
1. Orifice de remplissage du réservoir
2. Cadran de vapeur réglable
3. Bouton de vaporisation
(facultatif)
4. Cordon pivotant
5. Talon d’appui
6. Cadran de réglage de la température
7. Témoin de fonctionnement
8. Semelle
9. Repère de niveau d’eau
1. Apertura del tanque de agua
2. Control de vapor ajustable
3. Botón de rocío
(opcional)
4. Cable giratorio
5. Base de descanso
6. Control de temperatura
7. Luz de encendido
8. Suela
9. Ventana de agua
SPECIAL INSTRUCTIONS
1. To avoid a circuit overload, do not operate another high wattage
appliance on the same circuit.
840091500 Ev01.qxd 1/8/02 10:37 AM Page 2
1. Unplug iron. Pour 4 ounces (1⁄2 cup) of ordinary tap water into water tank opening. Plug iron into outlet.
2. Turn the Adjustable Steam Dial to desired steam setting.
3. Turn Temperature Control Dial to desired setting in the
steam range. Allow two minutes for the iron to reach desired temperature.
Water: Please use ordinary tap water. If you have extremely
hard water, alternate between tap water and distilled water for use in the iron.
Steam Settings
How to Steam Iron
54
How to Dry Iron
1. Turn the Adjustable Steam Dial to O.
2. Turn Temperature Control Dial to desired temperature.
Allow two minutes for iron to reach desired temperature.
• During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard.
• Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses.
• Steam vents should be cleared before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting iron steam.
Please Read Before First Use
SAVE THESE INSTRUCTIONS
CONSUMER SAFETY INFORMATION
This product is intended for household use only.
This appliance is equipped with a polarized plug. This type of plug has one blade wider than the other. The plug will fit into an electrical outlet only one way. This is a safety feature intended to help reduce the risk of electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way.
2. If an extension cord is absolutely necessary, a 10-ampere cord
should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.
NOTE: The Temperature Control Dial steam setting should match the Adjustable Steam Dial setting. For example, if steam ironing silk or wool, the Adjustable Steam Dial should be set to light steam.
Adjustable Steam Dial
Temperature
Control Dial
Caring and Cleaning
Iron
1. Turn Temperature Control Dial to Off. Unplug and let cool.
The iron takes longer to cool down than it does to heat up.
2. To empty water from iron, slowly tilt pointed end of iron down over a sink. Water will run out of water tank opening.
3. Wrap cord loosely around iron and store iron in an upright position. Do not store iron laying flat on soleplate.
840091500 Ev01.qxd 1/8/02 10:37 AM Page 4
Loading...
+ 7 hidden pages