Procom SFE33RE, SFE23RE User Manual

SFE23RE SHOWN

Installation Instructions and Owner’s Manual

WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE

MAY RESULT CAUSING PROPERTY, PERSONAL INJURY OR LOSS OF LIFE.

FOR YOUR SAFETY

DO NOT STORE

OR USE GASOLINE OR OTHER

FLAMMABLE VAPORS OR LIQUIDS

IN THE VICINITY OF THIS OR ANY

OTHER APPLIANCE

INSTALLER: DO NOT DISCARD THIS MANUAL-LEAVE FOR HOME OWNER

1

PC(220)-FE23A610-0709

TABLE OF CONTENTS

PLEASE READ THE INSTALLATION & OPERATION INSTRUCTIONS

BEFORE USING THIS APPLIANCE

IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow

these instructions may result in a possible electric shock, fire hazard and will void the warranty.

Important Instructions ….…………………………………………………………....2

Locating Your Electric Fireplace…………………………………….………….......3

Clearance To Combustibles………………………………………….…………......3

Electrical Connections…..……………………………………………….……….....3

Electrical Specifications…………………………………………...……………......3

Installing decorating logs..……………………………………………………........4

Service Instructions…………………………………………………………….…......5

Replacing Light Bulbs…………………………………….……………………........5

Maintenance of Motors………………………………………...........…………….…5

Glass Information……………………………………………...........………………..5

Electrical Wiring Diagram……………………………………........………….......…6.7

Operating Instructions………………………………………………………....…........8

Specification........………………………………………………………………...........9

Replacement Parts..…………………………………………………….....10. 11

Replacement Parts List........................……………………………………………..12

2

1

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions

should always be followed to reduce the risk of fire,

electric shock, and injury to persons, including the

following:

1.Read all instructions before using this heater.

2.This appliance is hot when in use. To avoid

burns, do not come in contact with heater. Keep

combustible materials, such as furniture,

pillows, bedding, papers, clothes, and curtains

at least 3 feet (1m.) from the front of the heater.

3.Extreme caution is necessary when any heater

is used by or near children or invalids and when-

ever the heater is left operating and unattended.

4.Always unplug heater when not in use.

5.Do not operate any heater with a damaged cord

or plug or after the heater malfunctions, has

been dropped or damaged in any manner.

6.Any repairs to this appliance should be carried

out by a qualified service person.

7.Under no circumstances should this electric fire-

place be modified. Parts having to be removed

for servicing must be replaced prior to operat-

ing this electric fireplace again.

8.Do not use outdoors.

9.This heater is not intended for use in bathrooms,

laundry areas or similar indoor locations. Never

use this appliance near a bathtub or other wa-

ter container.

11.To disconnect heater, turn controls to OFF, then

remove plug from outlet.

12. Connect to properly grounded outlets only.

13. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause

electric shock, fire or damage to the heater.

14.To prevent a possible fire, do not block air intakes

or exhaust in any manner. Do not use on soft

surfaces, such as a bed, where openings may

become blocked.

15.This heater gets hot and it contains internal parts

that sparks and arcs. Do not use it in areas where

gasoline, paint, or flammable liquids are used or

stored.

16.Use this heater only as described in this manual.

Other uses not recommended by the manufac-

turer may cause fire, electric shock, or injury.

17.Avoid the use of an extension cord because it may

overheat and cause a risk of fire. However if you

must use an extension cord, the cord shall be No.

1.0 mm2 minimum size and rated not less than

1900 watt. The extension cord must be a three

wire cord with grounding type plug and cord

connector.

18. This electric fireplace heater should not be used

as a drying rack for clothing. Also, do not hang

Christmas stockings or decorations on or near it.

19.SAVE THESE INSTRUCTIONS.

10.Do not run cord under carpeting. Do not cover

cord with throw rugs, runners or similar

coverings. Arrange cord away from traffic areas

and where it will not be tripped over.

2

3

LOCATING YOUR ELECTRIC FIREPLACE

Your new freestanding electric fireplace may be installed vir-

tually anywhere in your home. However when choosing a

location for your new electric fireplace, ensure that the gen-

eral instructions are followed. For best effect results, install

the electric fireplace out of direct sunlight.

WARNING: Electrical outlet wir-

ing must comply with local build-

ing codes and all other appli-

cable regulations to reduce the

risk of fire, electrical shock and

injury.

CLEARANCE TO COMBUSTIBLES

Sides....................................0 mm 0 inches

Floor.....................................0 mm 0 inches

Top........................................0 mm 0 inches

ELECTRICAL CONNECTION

A 10 AMP, 220 Volt, 50Hz circuit with a properly grounded outlet

is required. Preferably, the fireplace will be on a dedicated

circuit. Other appliances on the same circuit may cause the

circuit breaker to trip or the fuse to blow when the heater is on

operation. The unit comes standard with a 6’ (1828mm) long

three wire cord exiting from the rear of the fireplace. Plan the

installation to avoid the use of an extension cord. If an exten-

sion cord must be used, it must be a minimum 1.0 mm2 three

wire with grounding type plug connector and rated no less

than 1900 Watts. The cord shall not be more than 20 feet in

length.

WARNING: Do not use this fire-

place if any part of it has been

under water. Immediately call a

qualified service technician to

inspect the fireplace and re-

place any part of the electrical

system if necessary.

ELECTRICAL SPECIFICATIONS

Voltage:220 VAC, 50 Hz

Total Amps:6.3 Amps

Total Watts:1380 Watts

Heater Rating:1200 Watts

4

3