Procom MN300TPA, MN300HPA, MN180TPA, MN180HPA User Manual

Specifications and Main Features

  • Brandlist- MN180HPA, MN180TPA, MN300HPA, MN300TPA among others.
  • Uses Natural Gas as a fuel with specifying.
  • Uses Piezo Ignitor Mechanism.
  • Located in the lower levels of buildings Two types available, the Vent-Free MN300 and MN180. Air cannot escape from the heater, making it ideal for space heating.
  • BTU output:
  • MN180HPA: 18,000 BTU
  • MN180TPA: 18,000 BTU
  • MN300HPA: 30,000 BTU
  • MN300TPA: 30,000 BTU
  • Other numbers include Pressure Regulator Set-Up of 6’’ WC and Inlet Gas Pressure output of both a maximum of 10.5’’ WCC and a minimum of 7’’ WCC.
  • Varying Dimensions between the two heaters include:

2:1 Dimension of MN180 HPA and TPA being 19237 while the other two are 26.7237

  • Lastly weight differences can also be determined as
  • Safety Devices as Oxygen Depletion Sensor or ODS for safety shuts off.
  • Installations have to go according to local codes changed or complied with the latest edition electric fuel NTJG gas code ANSZ223.1.

Frequently Asked Questions

Q: Can more than one type of gas be used with the heater?

A: Natural gas is the only option available.

Q: What safety features does the heater have?

A: The heater contains an oxygen depletion sensor (ODS), which turns off the heater when there is not enough oxygen available.

Q: How do I ignite the heater?

A: Using the piezo ignitor button, light the pilot. Note: The appropriate lighting instructions are provided in the manual for best outcome.

Q: What should I do if the pilot light goes out?

A: Wait for about a minute before attempting to light the pilot. Thereafter, lighting instructions for the manual should be referred to.

Q: Are there any specific installation requirements?

A: Yes, do not install the heater in a confined area, or tight construction unless there is provision for fresh combustion air and ventilation.

Q: How often should the heater be inspected or cleaned?

A: The heater should be cleaned or inspected after every 2500 hours of use or 3 months regardless of the number of hours, and yearly by a qualified service person.

User Manual

Page 1
Procom MN300TPA, MN300HPA, MN180TPA, MN180HPA User Manual
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Loading...