The DTA-LAN is an IP call station for the DVS-21 communication system.
It is connected over a standard IP network (LAN/WAN) to a 10/100BASE-T port of
the LCPU system attachment and is checked cyclically.
Up to 240 keys with two-colour LEDs can be operated using expansion attachments.
Messages and configuration information are shown on a two-line plain text display.
The DTA-LAN is suitable as evacuation call station according to VDE 0828 /DIN EN
60849 if microphone monitoring (optional) is added.
At a Glance:
• IP call station with signalling indication
Suitable for interior rooms (control centres and rooms, switching rooms, etc.)
Variations
•
2 designs, expandable with additional housing, scaleable number of illuminated
buttons, identical electronics
IP Connection
•
Connection over plug-in Ethernet LAN cable, power supply 230 VAC over adapter
plug, power optionally over Ethernet (PoE)
•Functions
- Freely programmable key functions
- Display for configuration data/status display/connection information/message
operation signals
- Key illumination over two-colour LEDs (e.g. acknowledgement/malfunction/busy
indication)
- Floating contacts to remotely monitor and control external devices
- External loudspeakers can be connected
• Design
With integrated loudspeakers and gooseneck microphone, optionally with handheld microphone/headset, optionall
ProCom GmbH's LAN call stations are connected to the IP network
(WAN/VPN) over plug-in Ethernet LAN cable. The LCPU system attachment
makes available the IP interface of the DVS-21 system.
The call centres are configured using the ICS configuration software.
Conditions such as busy indications, speech acknowledgement and call
signalling can be displayed by the two-colour LEDs. The display and blink
behaviour of the LEDs can be programmed with the system software ICS.
Functions:
- Freely programmable key functions (e.g. PA/intercom operation with
acknowledge function, alarm display and acknowledge, louder/softer, …)
- Display for configuration data/status display/connection
information/message operation signals
- Key illumination over two-colour LEDs (e.g.
acknowledgement/malfunction/busy indication)
- Floating contacts to remotely monitor and control external devices
- Switching on of an external loudspeaker 6 W/8 Ohm