Specications
Model: PRO8006
Capacity: 5000 gram / 11 Pound /176 ounce
Increments: 1 gram, 0.1 ounce (1/10th oz.)
Weight Modes: Gram, Kilogram, Ounces, Pounds
Auto Shut Off: Turns off after 1 minute of nonuse.
Power Source: 2 (two) AAA batteries
For More Information
Website: http://procizion.com/
Email: support@procizion.com
For support, please see website or call 888 761 8134
First time use:
Before turning your scale on for the rst time, remove the plastic battery tab.
Instructions
How to weigh:
1) Press the ON/TARE button. All display segments will appear for approximately 2
seconds before resetting to zero.
2) Press the UNIT button to select the units (LB, OZ, G, KG)
3) Place item slowly on the platform.
4) Press the ON/TARE button to turn the scale off
How to use the “Tare” feature:
This feature allows you to obtain the exact weight of an item in a container, by
subtracting the weight of the container.
1) Place the container, without the item, slowly on the platform.
2) Press the ON/TARE button. The weight of the container will be removed and the
display will reset to zero.
3) Slowly add the item to the container. The display will show the weight of the item only.
4) You may continue to determine the weight of each additional item as they are added
by repeating steps 2 & 3.
How to clear the “Tare” feature:
Remove all items from the
platform and press the ON/
TARE button.
Do not place overweight items on the scale
Weighing items over the maximum weight
capacity will cause an overload “EEEE” error to
display. Immediately remove overweight items to
avoid causing damage to your scale.
Battery Replacement
Replace the batteries when the
low battery symbol appears on
the display.
Additional Information
1) Make sure your scale is at
room temperature, and on a
stable horizontal surface free
of vibration.
2) This scale is not waterproof. Do
not expose to moisture.
3) As this scale is a precision
instrument, it must be handled
with care. Avoid rough treatment,
shaking and vibration.
4) Do not disassemble this scale
(warranty will be void.)
How to ignore the container weight without using
Tare
If you would like to ignore the weight of the
container without using the Tare feature, place
the container slowly on the scale before turning it
on. You may now use your scale as usual and the
container weight is ignored.