PROception proLINK22, proAMP12R, proAMP104X, proAMP24R, proAMP310X Supplementary Installation Instructions

Using This Product

with the New Sky Boxes

SUPPLEMENTARY INSTALLATION INSTRUCTIONS

Introducing the PROception proLINK22 ‘RF replicator’

New Sky set-top boxes such as the DRX595 and
DRX890W do not have the familiar aerial input,
RF-1 and RF-2 connectors. These RF-loop­through facilities have been replaced with the
new ‘I/O PORT’ – a small round connector (10­pin mini-DIN) which allows an external
‘RF replicator’ (modulator) unit to provide similar
distribution functions.

Features of the PROception proLINK22 RF Replicator

■ Flying lead plugs directly into the Sky I/O port.

■ Replaces the ‘missing’ RF facilities on new-style Sky boxes.

■ Compatible with all PROception return-path and dual-mode amplifiers (listed above).

■ RF loop-through for Freeview and VHF radio (replaces Sky AERIAL IN connector).

■ Integral modulator, output channel 21-60, simple to configure in Sky menu.

■ Remote control capability on both RF outputs, supports two remote outlets with IR

eyes (where no local RF output is required).

■ External power supply option for larger systems using proAMP104X, proAMP310X

and proMHD14R amplifiers.

How to use the PROception proLINK22
This instruction sheet should be read in
conjunction with the instruction leaflets
for the return-path amplifier and for
the proLINK22. The following notes are
a quick guide.

■ Simply plug the flying lead into the

I/O port of the Sky box.

■ Enable power and set the desired

modulator RF channel using Sky
Setup menu (key SERVICES, 0, 0, 1,
SELECT).

■ Where the instructions for the

return-path or dual-mode amplifier
show a connection to RF OUT-2 of a
Sky box, connect to an RF output of
the proLINK22 instead.

■ Where necessary*, connect a mains

power unit type proPSA125 to the
proLINK22.

* See notes overleaf to determine whether an external power unit is required.

PROception

Applicable to the following models

proAMP12R proAMP104X

proAMP24R

proAMP310X

proAMP26R proMHD14R
proAMP28R proSAT1EYE

12 V

RF
IN

RF

OUT1

I/O

RF

OUT2

PROception

proLINK22

‘RF Replicator’

Page 1

Power supply notes

■ The proLINK22 itself is always powered from the Sky box , via the I/O cable.

■ An additional power unit is only required where necessary to power a distribution

amplifier – see the table below and the application example diagrams in the
proLINK22 instruction leaflet.

Amplifier

Max. remote outlets
with proSAT1EYE

Power unit
required?

See

note
None 2 No 1
proAMP12R 2 No
proAMP24R 4 No
proAMP26R 6 No
proAMP28R 8 No
proAMP104X 4 Yes 2
proAMP310X 10 Yes 3
proMHD14R 4 Yes

Notes

1. Assumes that the main TV is connected via HDMI and does not require an RF feed.

The no. of remote outlets can be increased to three using an additional splitter (see
proLINK22 instruction leaflet).

2. Connect proPSA125 power adapter to the proLINK22, not to the proAMP104X.

3. Use either a proPSA125 power adapter connected to the proAMP310X or a

proPSU112X connected in-line between the proLINK22 and the UHF input of the
proAMP310X.

https://www.facebook.com/blakeukltd

https://twitter.com/blakesaerials

■ Aerials ■ Brackets ■ Installation Equipment ■ AV ■ TV Wall Mounts

■ Coaxial Connectors ■ Adapters ■ RF Signal Distribution

■ Product Guide www.blake-uk.com/productguide

■ Latest news www.blake-uk.com/news

■ New products www.blake-uk.com/new-products

■ LTE FAQ www.ltefiltering.co.uk

Freeview’ is a registered trade mark of DTV Services Ltd.
‘Sky’, is a registered trade mark of Sky International AG.

Proception Limited
177–187 Rutland Road
SHEFFIELD S3 9PT
United Kingdom
Web: http://www.proception.co.uk
e-mail: [e-mail]

Page 2

PD2011-9051-01