Probuilt Professional Lighting Fluorescent Floor User Manual

38W Floor Light

Safety, operation & maintenance instructions

For use with:

- 110V

Thank you for buying the Defender.

Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you
with many years of trouble-free, safe and reliable service. It is suitable for both indoor and outdoor operation.

IMPORTANT SAFETY INSTRUCTIONS

This instruction booklet contains vital information for the safe use and operation of the Defender 38W Floor Light.
Carefully read and understand all instructions before use. Failure to adhere to the instructions could result in serious
personal injury or property damage. In addition, you should follow all warnings and instructions affixed to your
Defender 38W Floor Light.

This product has been carefully designed for its intended purpose and must not be modified in anyway. Any
alteration may compromise safety, as well as invalidate Technical Production Approvals and your insurance.

KEEP THIS BOOKLET FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

GETTING STARTED

• Site the 38W Floor Light in the desired position. Please consider the location carefully. Is this position going to
create an obstruction? Can the mains cable be routed safely to the power outlet?

• Route the cable safely to the mains outlet and secure in position if required.

• Please refer to the product’s rating labels before connecting to the power supply. If the power supply is suitable

for the product connect to the supply.

• The unit should now illuminate. If the Floor Light does not illuminate check the power supply.

• If there is a good power supply and the unit is not illuminated contact the supplier or consult an

electrical engineer.

• Your 38W Floor Light is now ready to use.

MAINTENANCE

A daily check is recommended to inspect for any physical damage or abrasions to the power cables. Ensure

there is no visible damage to the PL Floor Light and that all connections to the power source are good.

1. Ensure you are aware of all the safety requirements and the 38W Floor Light is suitable for the task you wish

to undertake.

2. It is suitable for both indoor and outdoor operation.

3. Do not use if any of the components on the light are damaged. If there is any doubt about the condition

do not use.

4. Ensure power supply is correct voltage for 38W Floor Light by checking the rating label on the rear of the light.

5. Protect power cord from contact with sharp objects, chemicals or hot surfaces.

6. Do not move the 38W Floor Light by pulling on the power cord.

7. Do not remove the plug on the 38W Floor Light by pulling on power cord.

8. Ensure the cable does not present a trip hazard. Do not run cable across walkways.

9. Always disconnect the equipment from the power supply before cleaning, making adjustments or when the

38W Floor Light is not in use.

10. Always use an GFI or power from mains supply with built in GFI protection.

11. Never use this equipment if you are ill, feeling tired, or under the influence of alcohol or drugs.

12. Always disconnect the mains supply before moving or repositioning.

13. Keep equipment dry whenever possible.

14. Do not use the near a source of heat.

15. Never leave unattended.

16. 38W Floor Light must not be modified in any way. Alterations of any description may invalidate the

product warranty and technical approvals.

17. Always ensure that the unit has cooled completely before storing.

18. Do not work near flammable gases or liquids.

19. Ensure the mains power cable is fully unwound before use.

20. If the external flexible cable or cord of the lumniaire is damaged, it shall be exclusivley replaced by the

manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

SPECIFICATION DATA

VOLTAGE 110V

PART NUMBER E709165

DESCRIPTION 110V~ 16A 38W Floor Light

VOLTAGE 110V~ 50Hz

PLUG TYPE 16A 110V BS EN 60309

LAMP TYPE 38W Fluorescent Tube

DIMENSIONS (LxWxH ) 315 x 140 x 365

MAXIMUM SAFE WORKING LOAD 16A

CLASSIFICATION IP44

OPERATING TEMPERATURE -20°C ~ 60°C

WEIGHT 2.4kg

RUNNING CURRENT <1A

DEFENDER LIMITED WARRANTY:

Defender® 110V 38W Fluorescent Floor Light manufactured by Birchwood Products is warranted against manufacturing

defects in material and workmanship for 90 days from date of purchase.

Questions, problems or product registration:

Call ProBuilt Professional Lighting Customer Services and Technical Support at 877-707-0800

(Mon - Fri, 8:30am - 5:00pm CT) or email [e-mail] anytime.