Page 1
INSTRUCTION MANUAL
Your ProBoat Radio includes the following items:
Transmitter
………………………………………………………
PB-2P
2-Channel Receiver
……………………………………………
AMR-2/27
2 Servos
…………………………………………………………
AMS-16
Accessories
………………
B.E.C. Switch Harness and Servo Accessories
TRANSMITTER SPECIFICATIONS:
Antenna Output
…………………………………………………
500mW
27 MHz
…………………………………………………………
9.6V D/C
…………………………………………
8.15
x 7.00
x 3.35
………………………………………………………………
13 oz
…………………………………………
…………………………………………………
…………
……………………………………………………
Torque:
……………………………………
………………………………………
……………………
……………………………………………………
Control of your model is impossible without suffi-
PISTOL GRIP RADIO CONTROL SYSTEM
I. INTRODUCTION
II. COMPONENTS AND SPECIFICATIONS
III. R/C SAFETY PRECAUTIONS
Page 2
TTENTION:
T socket on your receiver will operate
for a typical setup.
IV. OPERATING YOUR MODEL
Switch off the receiver, then the transmitter.
This ensures that you will always have a signal to the receiver,
– Connections to B.E.C. receiver with mechanical speed controler.
• An indirect drive feedback potentiometer gives additional
protection from vibration
• State-of-the-art surface mount technology (SMT)
– Connections to B.E.C. receiver
with electronic speed controler. Ni-Cad
V. INSTALLATION
Page 3
VI. IDENTIFICATION OF TRANSMITTER PARTS
– If the meter indicates
The steering wheel
– Rotate the top trim tab
– Rotate the bottom
(Center pin negative)
– The steering rate
THROTTLE TRIGGER
– The throttle trigger moves
– To remove
BACK OF TRANSMITTER
Page 4
26.995
..................................
27.045
..................................
27.095
...................................
27.145
...................................
27.195
...................................
27.255
...................................
This will speed the repair process of checking
battery condition.
receiver, servos, etc.) Do not return your complete
system, installed in a model car, boat, etc.
of the system and problem(s) encountered. Provide an
itemized list of equipment enclosed and identify any
particular area/function which may better assist our
technicians in addressing your concerns. Date your
correspondence, and be sure your complete name and
address appear on this enclosure.
number where you can be reached during the
business day.
To receive warranty service you
must include your original dated sales receipt to verify
your proof-of-purchase date. Providing that warranty
conditions have been met, your radio will be repaired
without charge.
repair cost exceed 50% of the retail purchase cost, you
will be provided with an estimate advising you of
your options.
4105 Fieldstone Road
Champaign, Illinois 61821
217.355.9511
Outside the U.S., contact the original point of sale
for specific warranty information.
VII. PARTS LISTING
FREQUENCY (MHZ) CHANNEL
This limited warranty gives you specific legal rights; you also have other rights which may vary from country to country. As with all
Your new Pro Boat™ Remote Control Radio System is warranted to the original purchaser against manufacturer defects in materi-
This warranty does not apply to any unit which has been improperly installed, mishandled, abused or damaged in a crash, or to
VIII. FREQUENCY CHART
X. WARRANTY AND SERVICE INFORMATION
Loading...