Page 1
DMA-1508
KEY FEATURES
•
8 Channels in 1U Chassis: 2 x 300W + 6 x 100W (bridgeable)
• Congurable to 3 x 300W + 4 x 100W; 4 x 300W + 2 x 100W; 5 x 300W
• Installer Programmable DSP, per Channel:
- Signal Routing
- Acoustic Compensation Filters for Perforated Screen, Room Boundary Eects, etc.
- Level and Delay
- 8 Bands Parametric EQ and High and Low-Pass Filters
• Universal AC and 12V Trigger and Signal Sense
DESCRIPTION
The DMA-1508 embodies the latest PRO Power and Advanced DSP
technology in a compact 1U chassis. Developed to provide a low-cost
option for smaller cinema systems or residential/commercial distributed
audio applications, the DMA-1508 is congurable to provide up to
one-thousand-ve-hundred watts of total power, yet weighs just
8 pounds.
In its stock conguration, the 1508 provides 8 channels of power amplication and on-board DSP: 2 x 300W + 6 x 100W — an ideal combination
for 5.2 surround systems where the 300W channels can power dual
subwoofers and the 100W channels can power the front and surround
channels, including bi-amplication of the critical center-channel
speaker. For added exibility, each of the 100W channel-pairs can be
bridged together to create a single 300W channel. Iterations up to 5 x
300W can be dealer-congured using SoundTools™ Amplier Conguration and System Optimization software.
Like the PRO PMA series of amplier/processors, the DMA-1508 oers
advanced installer-programmable DSP features which make even the
most advanced audio systems easy to deploy and optimize. Speaker
programming, room acoustic compensation lters, high and low pass
lters, parametric EQ, gain and delay adjustments are available via PRO’s
easy-to-use, SoundTools™ software package. In addition, the gain of
all channels, both bridged and unbridged is managed by the amplier
“brain” to match precisely those of PMA amplier models, so DMA may
be used in concert with PMA models without the worry of mismatched
levels: simply connect the speakers, program the ampliers and go.
SPECS
APPLICATION:
POWER OUTPUT:
(per channel, congurable)
STANDBY POWER:
CONTROLS:
FRONT DISPLAY:
REAR LED INDICATORS:
DIMENSIONS:
WEIGHT:
Amplication of PRO loudspeakers
& subwoofers in surround sound &
distributed audio applications
2 x 300W + 6 x 100W
3 x 300W + 4 x 100W
4 x 300W + 2 x 100W
5 x 300W
Less than 0.5W
Power, 12VDC trigger/standby,
software signal routing, lters,
loudspeaker programming
Channel number, signal routing,
installed loudspeaker program
Power, DSP activity, bridged status,
standby/protect modes
1.75"H (1RU) x 19.0"W x 14.13"D
8 lbs.
PRO AUDIO TECHNOLOGY Product Sheets • Updated 3.13.2015
Loading...