PROAIM P-VR Instruction Manual

Vario Camera Support Stabilizer Rig

(P-VR )

I N S TRUC T I O N M ANUA L

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by

the applicable copyright statutes or in wring by the Publisher.

All rights reserved.

Proaim Vario Camera Support Stabilizer Rig 2

INTRODUCTION

The Proaim Vario is a new and unique design made to save me, space and money. We oen
have customers that complain how various lmmaking gear takes so much me, space and
money- this encouraged us to start designing a product that solves this problem at a fracon of
the cost that goes into all the equipment. Proaim Vario is a 4 in 1 equipment that goes from a
hi-hat to a shoulder rig to monopod to a stabilizer within seconds.

IN THE BOX

Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.

Vario camera stabilizer rig

1 x Handle set

COMPACT BAG PACKING

The Vario comes neatly packed in a foam
padded bag making it easier to carry and
protect (though it is unbreakable, but just
to be safer)!

ASSEMBLING PROAIM VARIO CAMERA STABILIZER RIG

 Insert handles into the handle clamp and

twist it to ghten properly.

Proaim Vario Camera Support Stabilizer Rig 3

ADJUSTABLE HANDLES

The ergonomics of the design puts true value into these rigs. The handle move around easily and
swily allows you to adjust them according to your comfort.

 Press the side knob to remove the "L" Shaped Quick Release plate as shown below. Then

aach the camera with the "L" Shaped quick release plate.

"L" SHAPED QUICK RELEASE

The "L" shaped quick release is designed to
be compable with both DSLR cameras and
professional cameras.