PROAIM HS-1000 Instruction Manual

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Follow Focus with Hard Stops
(HS-1000)
I N S T R UC T I O N M A N U A L
SET UP
Mount the Gear ring belt over your lens focusing ring. Tighten the gear properly.
I NTRO D UC T IO N
Proaim introduces its most durable HS-1000 follow focus allowing you to smoothly and accurately pull focus with cinema and DSLR lenses equipped with gear rings. Integrated into the follow focus are hard stops, letting you set start/end points on DSLR lenses for quick focus racking between two focus points
I N T H E B O X
Please inspect the contents of your shipped package to ensure you have received all that is pictured and listed below.
HS-1000 15mm follow focus
Gear Ring Belt
Speed Crank
Proaim HS-1000 Follow Focus with Hard Stops (HS-1000) 2
The white marking disc is magnec and can be easily pulled back and placed onto the rotang knob.
Mount the HS-1000 follow focus on the rods, align it with the gear ring and ghten the side knobs to secure properly.
—–
By removing this screw, the drive gear can be mounted on the other side.
Remove the safety cap from the shank in order to aach the drive gear.
Hard Stop
For quick focus racking
Proaim HS-1000 Follow Focus with Hard Stops (HS-1000) 3
WARRANTY
We oer a limited me warranty for our products. For Mechanical products we provide a 6 month warranty & for electronic products we provide a 3 month warranty from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or crasmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us. If any VAT or import dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the replacement parts only) to the customers aer the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. Aer that, Nominal cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our best to help you out.
For any other assistance you can reach us via email.
YO U R H S - 1 0 0 0 F O L L O W F O C U S
W I T H H A R D S TO P S I S R E A D Y T O G O
Proaim HS-1000 Follow Focus with Hard Stops (HS-1000) 4
Loading...