Pro2 HDMIIPLR HDMI Over CAT6 Extender, HDMIIPLR User Manual

www.pro2.com.au

HDMI Over CAT6 with IR

HDMIIPLR

User Manual

Transmitter

Receiver

Notice

PRO2 reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

© 2012 PRO2, All Rights Reserved.

All trademarks are the property of their respective companies.

Rev × A

CONTENTS

1. Introduction

2. Features

3. Transmitter Unit Panel Layout

4. Transmitter Unit Panel Descriptions

5. Receiver Unit Panel Layout

6. Receiver Unit Panel Descriptions

7. Remote Control Panel Layout & Descriptions

8. Connecting and Operating HDMI Over CAT6 Extender with IR

9. Specifications

10. Warranty

11. Compliance

12. Appendix A

INTRODUCTION

The HDMIIPLR HDMI Over CAT6 Extender with IR-Transmitter &
Receiver

The HDMIIPLR HDMI Over CAT6 Ethernet Extender with IR sends
HDMI signals over just one 100Ohm CAT6 cable -- up to 330 feet away.
The HDMIIPLR HDMI Over CAT6 Extender supports HDMI 1.3 with
Full HD 1080p resolution. DVI-D Computer video can also be transmitted
with a DVI-to-HDMI cable

By using standard and widely available 100Ohm CAT6 cables, the
HDMIIPLR HDMI Over CAT6 Extender makes HDMI signal extensions
easier than heavy and expensive copper cable and more robust than
optical fiber.

How it connects

The HDMIIPLR HDMI Over CAT6 Ethernet Extender system consists of
a Transmitter and a Receiver. The HDMI source (set-top box, DVD player,
or gaming console) connects to the Transmitter box. The Receiver box
connects to the HDTV display in the same way -- up to 330 feet away.
One 100Ohm CAT6 cables link the Transmitter and Receiver. Power is
applied to the Transmitter and Receiver with 5V DC power supply.
HDMI picture emerges on the HDTV display.

Note：The HDMIIPLR HDMI Over CAT6 Extender is HDCP 2.0 compliant.

FEATURES

 Flexible extension of high-bandwidth HDMI 1.3
 Audio and video are transmitted digitally over the 100Ohm CAT6 cable

for lower signal loss

 Single Link Range: 1080p/60 and 1920x1200.
 Compliant with HDMI 1.3, HDCP 2.0 and DVI1.1 standards
 Supports digital video formats in 480p , 720p and 1080p
 Supports PCM 2 Ch audio
 Supports IR Pass-through function to control HDMI source devices

(set-top box, DVD player and Blue ray DVD Player) from Receiver by
its IR extender input

 It can control source channel via IR remote control provided

Package Includes

(1) HDMIIPLR-TX HDMI Over CAT6 Ethernet Transmitter
(2) HDMIIPLR-RX HDMI Over CAT6 Ethernet Receiver
(3) IR Receiver Cable
(4) IR Remote control
(5) 2x 5V DC Power Supplies for Transmitter and Receiver
(6) User Manual

Optional Items:

If you need the following items, please let us know and we will quote for
you.

(1) HDMI Cable (3 feet / 6 feet / 10 feet)
(2) Mounted Ear & Screws

TRANSMITTER UNIT PANEL LAYOUT

Front Panel

Back Panel

Side Panel

Power Input port RJ45 Port HDMI Input port IR Emitter

Dip Switch Power LED
Link LED