Pro2 HDMIFIB Operating Instructions Manual

Operating Instructions

1

HDMI Extender over Fiber

Operating Instructions

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this manual for future reference.

FEATURES

 Provides high-resolution image quality.

 Plug-and-play operation - no programming or setup required.

 Extends 1080p HDMI signals up to 20km over a optic cable.

 Optical fiber use rules out any RF interference.

 Ethernet Pass-Through.



NOTICE

Our company reserve the right to make changes in the hardware, packaging and any accompanying documentation without prior
written

notice.

Compliant HDCP.

Operating Instructions

2

TABLE OF CONTENTS

Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Maintenance
Product Service
Warranty

SPECIFICATIONS

Note1: Specifications are subject to change without notice. Mass and dimensions are approximate.

PACKING CONTENTS

1) Main Unit. Transmitter & Receiver HDMI Extender

2) Power adapter DC 5V 2Ax2PCS

3) IR-TX cable&IR-RX cable

4) Operating Instructions

Operating Temperature -5 to +35 (+23 to +95 )℃ ℃

Storage Temperature -10 ~70 (+14 to +158 )℃ ℃ ℃

Operating Humidity 10 to 90%RH (No Condensation)

Storage Humidity 5 to 90%RH (No Condensation)

Fiber Module 1310nm signlemode Transmitter&receiver

Fiber Connector SC Duplex Connector

Transmission Distance 1080P 36bit @60Hz 20Km(Maximum)

Power consumption TX:8watts;RX:8watts((Maximum)

IR wavelength &frequency Wavelength:940nm,frequency 38kHz

Dimension (L×W×H) TX:L154xW99.5xH27mm;RX:L154xW99.5xH27mm

Net Weight Transmitter:410g,Receiver:410g,

LED Indicators Power,Link/Act and Speed