Pro 2 H2SPC5L Operating Instructions Manual

Operating Instructions

1x2 HDMI Splitter Over Single Cat5e/6 Cable
Up to 50M with IR
Model: H2SPC5L

Operating Instructions

Notice

The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.

Features

 Distribute 1 HDMI singal to 2 identical UTP outputs synchronously,

with 1xlooping HDMI output.

 Transmit over 50m single Cat5e/6 cable.
 Can be cascaded for 4 layers.
 With wide-band Bi-Direction IR control (38 ~ 56 kHz).

(IR extension from Sender to Receiver or from Receiver to Sender)

 Support Full HD 1080p, VESA resolution: 1920x1200.
 Supports Dolby TrueHD, DTS-HD Master Audio.
 Support 3D.

Package Contents

 1 x HDMI Splitter
 1 x 5V DC Adapter
 1 x User Manual

1

Operating Instructions

SPECIFICATIONS

Operating Temperature Range

-5 to +35℃(+23 to +95℉)

Operating Humidity Range

5 to 90%RH (No Condensation)

Video Amplifier Bandwidth

140MHz

Input Video Signal

0.5-1.0 Volts P-P

Input DDC Signal

5 volts p-p(TTL)

Data transfer speed rate

6.75Gbps(Maximum)

Input port

1xHDMI

Output ports

2xCat5e/6, 1xHDMI

Video Format Supported

DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P
VESA resolution:1920x1200①
3D video support

Vertical Frequency range

60Hz

Support Audio Format

DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, stereo etc ②

Transmission Distance

1080P 8-bit 50m
Over single cat5e or cat6 cable/24AWG/Solid③

Power consumption

4W(Max)

Dimension (L×W×H)

L149xW79xH28mm

Net Weight

317.7g

Note: ① The transmission distance is Max 40m under 1920x1200 resolution.
② The distance is 40m under 5.1CH or 7.1CH.
③ Under perfect transmission conditions including straight cable runs with no

electrical interference, bends, kinks, patch panels or wall outlets.

PANEL DESCRIPTIONS

Front Panel

1. DIP switch for EDID setting 2. IR-TX port

3. IR-RX port 4. Indicator of HDMI output

5. Indicator of HDMI input 6. Power input indicator

2