Prism Medical UK SA160C User Manual

SA160C User guide Rev 02 - June 2017 Page 1

PRISM MEDICAL UK

SA160C STAND AID

USER GUIDE

Unit 1, Tir Llwyd Industrial Estate, St Asaph Avenue, Kinmel Bay, Nr Rhyl, Conwy, LL18 5JZ

[e-mail] Tel [phone] www.prismmedical.co.uk

SA160C User guide Rev 02 - June 2017 Page 2

CAUTION

Please read the instructions thoroughly before using this equipment.

Contents

Delivery and Unpacking ………………………………………………….…..page 3

Parts...…………………………………….……………………………………...page 4

Operation of the Electrical parts....………………………………………….page 5

Operation of the Mechanical parts………………………….………………page 7

General Operations and use…..……………………………...…………..… page 7

Technical Specification …….…………………….………………………… page 8

Fault Finding / Maintenance ………………………………..…….……….. page 9

Service / Maintenance …………………………………………….….…….…page 9

Cleaning, Disinfection and Sterilisation..……………………….…….….. page 9

Guarantee……..…………………………………………….…….…………… page 10

Prism Medical UK Ltd would like to thank you for purchasing the
SA160C stand aid.

Purpose:

The SA160C is a standing transfer aid for home care, acute care and
residential care. Due to the easy manoeuvrability and handling of the SA160C
it can be used by one person, subject to a risk assessment.

The SA160C may be used to assist individuals from sitting to standing,
transporting and walking. All of the above should only be done following a

risk assessment of the person being moved to assess their ability and safety

using the equipment.

SA160C User guide Rev 02 - June 2017 Page 3

The Stand aid has been delivered to you
as a complete hoist unit, so no assembly
is required. However, you may need to
charge the battery before using the hoist.
If so, connect the charger unit to the
control box and mains, ensure that the

Emergency stop is in the out position

and allow the battery to recharge for 2
hours prior to use.

Delivery and Unpacking of the SA160C Stand aid

WARNING

Take care whilst removing the SA160C as the hoist weight is 40Kgs and may need two

people to remove from its packaging

SA160C User guide Rev 02 - June 2017 Page 4

Stand Aid Parts

1 Hooks to secure the belt loops 7 Knee Pad unit

2 Lifting arm 8 Frame

3 Actuators 9 Footplate

4 Battery Box 10 Legs ( width adjustable )

5 Braked wheels 11 Control unit incl. emergency stop button

6 Hand control

2

1

8

6

7

9

10

5

3

11

3

4