Printekmobile FieldPro 530, FieldPro 530si Quick Start Manual
FieldPro 530
This guide provides
information on the daily use of the FieldPro 530
printer.
Tear paper
Quick Start Guide
For additional information, please refer to the FieldPro 530 User Guide.
Printer features
Paper door release button
Control Panel
Media
Press Paper door release button to
open the paper compartment door.
Pull small leader of paper out and
close paper door. “ Clicks” when
properly closed.
Paper Door
towards back of
printer
NOTE:
When using
2” paper,
install spacer
P/N: 93194
Battery
Press button to see
battery charge level.
4LED 100% charge
3LED 75%
2LED 50%
1LED 25%
Use Bay Chargers or
AC/DC Power
Adapter to charge.
Please contact your Printek
sales representative for
price and availability.
Power Port
USB Data Port
Loosen hand strap
(not pictured) to
access battery
door.
Rotate knob 180
to unlock battery
door.
Drop in battery.
Close battery door
and rotate knob
o
180
to lock.
o
Drivers, User Manuals, and SW Utilities available @ www.printek.com
© 2015 Printek LLC. A company. 1517 Townline Road, Benton Harbor, MI 49022 PH: 269-925-3200 FX: 888-211-3400
Part 7267 Rev C
FieldPro
FP-530 Quick Start Guide
Control Panel indicators
Function: How to:
Power & Status
(Green/Red)
On X On Booting up
On X Off Ready
On X Flashing Paper Error/Lid Open Paper feed button Advance paper
Flashing X Off Job is arriving
Flashing X Off Job is printing
Flashing X Flashing IP over USB active
Solid Charging Battery
X Flashing X Battery Low
Battery
(Yellow)
Alert
(Red)
Indication
Power Button Power up
Power down
Toggle IP over
USB on/off
Print self-test
Press & Release
Press & Hold
Press Twice
Press once
Press twice
Self-Test / Configuration print out
To print the configuration report and self-test: With Power on, press the paper feed button twice quickly.
To access configuration menu refer to Operator’s Manual.
USB Access to Printer Web Pages
1. Connect USB cable from printer to host
2. With printer turned on, set the printer into configuration mode by double-clicking the POWER button. Both the Power LED and Fault LED
will flash together.
3. Open browser on your host and type 169.254.200.1 into the address bar of the browser (Note: Firefox or Chrome will work best) and hit
Enter.
4. A login box should appear.
5. Type “0000” and hit Enter- you should now be at the home page for FP530 Configuration.
6. To return the printer to normal operating mode, double-click the POWER button. The Power LED will be returned to a solid light.
Drivers, User Manuals, and SW Utilities available @ www.printek.com
© 2015 Printek LLC. A company. 1517 Townline Road, Benton Harbor, MI 49022 PH: 269-925-3200 FX: 888-211-3400
Part 7267 Rev C
Loading...