Prince Castle 428-QL Parts List

Operating

Model No. 428-QL Series

Instructions

Prince Castle’s line of Radiant Conveyor Toasters
feature compact designs with easy to use controls. All
models feature reliable metal sheathed radiant
elements for durability, removable crumb tray, and
loading chute.

Electrical

Model Volts Watts Amps Hz Plug
Two Slice Models

428-EQLGB 230 2970 13.0 50 BS-1363A
428-EQLGBC 230 2970 13.0 50 BS-1363A

Three Slice Models

428-3EQLPCE 240 3650 15.2 50 CEE-17

Conveyor Toaster

TABLE OF CONTENTS

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Preventive Maintenance . . . . . . . . . . . . . . . . . . . . 3

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Exploded View. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . 6

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

LIMITED WARRANTY

This product is warranted to be free from defects in material

and/or workmansh ip fo r a pe riod of two (2) years from date
of original installation, not to exceed 30 months from date of
shipment from our fact or y ( 18 m o n th s f or heat er burnout).

On-location service for failure within 1 year of installation,
proof of purchase will be required.

Any component which proves to be faulty in material and/or
workmanship will be replaced or repaired (at the option of
Prince Castle, Inc.) without cost to the customer for pa rt s
and labor.

This warranty is subject to the following except ions/
conditions:

• Use of any non-genuine Prince Castle parts voids this
warranty.

• This equipment is portable; charges for on-locatio n
service (e.g., trip charges, mileage) are not included
in the provisions of this warranty.

• All labor shall be performed d uring regul ar work hours .
Overtime premium will be charged to the buyer.

• All problems due to operation at voltages other th an
specified on equipment nameplates do not app l y to
warranty. Conversion to correct voltage must be t he
customer’s responsibility.

• Damage caused by carelessness, neglect, and/or
abuse (e.g., dropping, tampering or altering parts),
equipment damage d in shi pm ent, by fire, flood or an
act of God is not covered under this warranty.

• Motors that fail due to lack of monthly lubrication will
not necessarily be covered under warranty.

• This toaster must be serviced by a Prince Castle
Authorized Service Center or a Prince Castle Service
Technician. Failure to do so can void this warranty.

355 East Kehoe Blvd. • Carol Stream, IL 60188 USA

428-519-EN Printed in USA 1/06 © 2006

Telephone: [phone] • Fax : [phone]

Toll Free: 1-800-PCASTLE

www.princecastle.com

INTENDED USE

This toaster is designed to toast breads, bagels or
English muffins. Do not attempt to toast croissants.
Their butter content will cause them to stick to the
conveyor. Do not attempt to toast products that have
been buttered or spread with jam or other coating. Do
not attempt to bake in the toaster.

INSTALLATION

1. After you have removed the toaster from the
carton, inspect the unit for signs of damage. If
there is damage to the unit:

• Notify carrier within 24 hours after delivery.

• Save carton and packing materials for

inspection purposes.

• Contact your local dealer or, if pu rchased

directly, th e Prince Castle Customer Sales
Department at 1-630-462-8800 to arrange for a
replacement to be sent.

2. Verify that all parts have been received. Remove
the vinyl protective coating from toaster parts.

3. Remove packaging from bun slide and install bun
slide in toaster by hooking it into the two pins in
the rear of the chamber. (See Detail 1)

figure 1

Detail 2 Detail 1

4. Attach heat shield by hooking its top tabs onto the
two mounting pins just under the crumb tray then
allow the shield to swing down so it touches the
two lower mounting pins. Lift shield slightly to
hook onto the lower pins.

5. The toaster fan located on the bottom of the
toaster in the rear draws in cool room air and
circulates it through the toaster sides and tops. To
insure adequate heat dissipation do not position
the toaster where the fan would draw in hot
discharge from another appliance.

OPERATION

1. Plug unit into the proper voltage receptacle.

2. Set Power switch to “l” for On.

figure 2

3. Turn upper and lower heater controls to
maximum.

figure 3

4. Allow 20 minutes for toaster to warm up.

5. Lay bread, bagel, or muffin cut side up on the inlet
ramp and push into toaster until it slides on to the
conveyor chain. To control toast color, vary the
conveyor speed or the heater settings.

Printed in USA 1/06 © 2006 2 428-519-EN