Prince Castle 2445, 2446 Service Manual

OPERATING

INSTRUCTIONS

Pedestal High Chair
Model No. 2445, 2446 & 2447

WARRANTY

This product is warranted to be free from defects in
material and/or workmanship for a period of two
years from the date of original installation. Any
component which proves to be faulty during the
warranty period will be replaced without cost to the
customer.

PRODUCT SPECIFICATIONS

Prince Castle's exclusive line of pedestal high chairs allows
operators the opportunity to provide comfortable, safe seat­ing for small children and infants. These chairs are con­structed of durable, hi-impact molded plastic. They feature
web safety straps, positive lock buckles, large casters, and
three-position molded plastic trays. These high chairs are
available in white, brown or gray.

Dimensions

Height (overall) 36 (91.44 cm)
Height (at tray level) 28-1/4  (71.76 cm)
Width (with tray) 20 (50.80 cm)
Depth 20 (50.80 cm)
Shipping Weight 17 lbs. (7.71 kg.)

2445KSL White high chair with lemon pad
2445DR White high chair with red pad,

with foot rest

2445DL White high chair with white pad,

with foot rest
2445KSW White high chair with walnut pad
2446KSW Brown high chair with walnut pad
2446DR Brown high chair with red pad,

with foot rest
2446DW Brown high chair with walnut pad,

with foot rest
2446DL Brown high chair with white pad,

with foot rest
2447M Grey high chair, with foot rest

Printed in March 1999

Prince Castle Inc.

355 East Kehoe Blvd. l Carol Stream, IL 60188

Tel: [phone]

Toll Free: 1-800-PCASTLE

l Fax: [phone]

2447-503

INSTALLATION

1. After you have removed the high chair seat, pedes­tal and tray from the carton, inspect the unit for
signs of damage. If there is damage to the unit:

l Notify carrier within 24 hours after delivery.
l Save carton and packing materials for inspection

purposes.

l Contact your Prince Castle dealer for replace-

ment or the Prince Castle Customer Sales
Department at 1-800-722-7853 if purchased
directly

2. Verify that all parts have been received.

3. Assemble casters to pedestal legs. Gently tap the
casters with a hammer to secure them to the
pedestal legs.

4. Turn the seat upsidedown and place the pedestal
mounting plate on the bottom of seat. Make sure
the part marked front on the mounting plate faces
the front of the seat.

5. Attach seat to mounting plate with (4) screws
provided. Start all (4) screws before tightening.

6. Turn chair upright and attach tray to chair arms.
The chair is now ready for use.

1

3

2

4

5

6

IMPORTANT: Any child using this chair should be
secured by the restraining seat belt and crotch strap at
all times. Simply push buckle and clasp together to
secure. To open, depress buckle and pull apart.
See figure 1.

figure 1

CLEANING

Wash seat with soap and water. A soft scrub brush
can be used to remove ground-in dirt. Wipe dry with a
dry, clean cloth. Wipe legs with a damp cloth.

PARTS LIST

Item Part No. Description

1 2447-6S Seat Assy. (Gray)

CL459S White w/Lemon Pad
CL462S White w/Walnut Pad
CL456S Brown w/Walnut Pad

2445-12S White w/Red Pad
2 446-13 Tray (White Plastic)
3 2447-4S Back Pad Kit (Gray)

446-5S Back Pad Kit (Walnut)

714-1S Back Pad Kit (Red)

445-1S Back Pad Kit (Lemon)
4 2447-3S Safety Stap (Black)

460-13 Safety Strap (Brown)
5 2447-2S Crotch Strap (Black)

460-8 Crotch Strap (Brown)
6 89-830 Caster

* 445-029SA Tray Slides (Pkg. of 2)
* 442-7 Belly Bar Kit

* Not Shown