Page 1
PRIMEX
MDE Installation Instructions
Verge PR1500
Allfield Media Distribution Enclosure
The Primex PR1500 Allfield MDE is an all-in-one new
build and retrofit WiFi transparent enclosure. It mounts
in-wall, on-wall or free standing for single or multi-family
applications. The unique, patented Smart Lid is self-aligning
and closing with an adjustable depth and clean aesthetics.
The PR1500 provides ample room for multi-play applications
from broadband to smart home installations.
GREENFIELD Installation
STEP 1
Install horizontal joist and electrical box
To ensure a comfortable working height it is recommended that
the top of the electrical box be installed 36” - 48” from the ground.
Ensure that the support joist is level.
Note: Install if required by your local electrical code.
WARNING
• DO NOT stretch enclosure walls or lid won’t seat properly.
• DO NOT over tighten mounting screws.
• DO NOT use mounting screws larger than #8.
• RECOMMENDED mounting height, 36” - 48” from the floor.
• LEAVE paintshield in during installation to protect enclosure
during drywall installation and painting.
* On-wall maximum load rating: 10kg (22lbs)
STEP 2
Remove bottom knock outs
Prior to installation, remove required knockout covers. Then,
remove the knockout(s) for the electrical box using a Primex
(P/N: 125-1683) flush cutter tool to trim support ribs. Trim excess
plastic with knife.
Supports drop-in and under-mount gangbox installations.
STEP 3 STEP 4
Install base
Install single #8 flat head screw in corner flange, level, then secure
with additional screws.
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
www.primex.com
F
1.604.881.7835
Install Electrical Kit
Place gangbox into cut out knockout, connect power and secure
receptacle to gangbox using screws.
Note: Secure gangbox to horizontal joist if required by your local
electrical code.
Fit everything. Together.
452-3120 E & OE 12/18
Page 2
PRIMEX
MDE Installation Instructions
Verge PR1500
Allfield Media Distribution Enclosure
STEP 5
Remove top knock outs and connect distribution conduit
Remove the conduit knockouts using a flush cutter tool and blunt force
tool. Connect conduit for outgoing and incoming services and secure
with Primex conduit reducers (3/4”-1/2” reducers P/N: 125-1022,
1” - 3/4” reducers P/N: 125-0936).
1
3
2
4
STEP 6
Measure, mark, cut and mount drywall
Measure, mark, then cut drywall where enclosure will be mounted.
Fit drywall over top of the installed enclosure base and secure.
1
3
2
4
STEP 7
Paint wall and affix smart lid
Leave paintshield in during installation to protect enclosure
during drywall installation, mudding and painting.
GREENFIELD TO BROWNFIELD CONVERSION
Remove tabs and frame
Manually remove the tabs from the base. Using flush cutters, cut away
the frame from the lid and smooth any rough edges with a knife.
1
3
2
4
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
www.primex.com
452-3120 E & OE 12/18
F
1.604.881.7835
Fit everything. Together.
Page 3
PRIMEX
MDE Installation Instructions
BROWNFIELD Wall-mount Installation
Verge PR1500
Allfield Media Distribution Enclosure
STEP 1
Wall mount install
Using a stud finder, mark position at a recommended height of
36” - 48”.
Pre-drill holes in the center slots of the enclosure prior to mounting.
STEP 2
Remove knockout and insert optional keystones.
Trim support ribs on knockout using flush cutter tool. (P/N: 125-
1683) Snap in keystone adapter (P/N: 125-1152 sold separately)
and install optional keystones (available from Primex).
Remove knockouts for power as needed.
1
3
STEP 3 STEP 4
2
4
Affix PR1500 to stud
Affix PR1500 on a single stud using two No. 8 wood screws in the
pre-drilled holes. Be sure to level before securing the bottom screw.
1 2
3
Affix Smart Lid
Place smart lid into place. Optional key lock kit (P/N: 125-1570)
and hex lock kit (P/N: 125-1641) available.
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
www.primex.com
452-3120 E & OE 12/18
F
1.604.881.7835
Fit everything. Together.
Page 4
PRIMEX
MDE Installation Instructions
BROWNFIELD Freestanding Installation
Verge PR1500
Allfield Media Distribution Enclosure
STEP 1
Prepare enclosure
Remove lid. Trim support ribs on knockouts using flush cutters.
STEP 2
Install keystone adapter
Snap in optional keystone adapter (P/N: 125-1152 sold
separately) and jacks.
1 2
3
STEP 3 STEP 4
Attach feet
Install accessory feet (P/N: 125-1571 sold separately) using the
screws provided.
Finish Installation
Connect services and mount additional components using Primex’s
mounting systems. Optional key locks available (P/N: 125-1570).
ACCESSORIES
Product Description SC
7” RMP w/RMB2(x2), pushpins (x10)
7” RMP w/RMB(x2), pushpins (x10)
7” RMP w/RMK(x2), pushpins (x10)
10” RMP w/RMB2(x4), pushpins (x10)
10” RMP w/RMB(x4), pushpins (x10)
10” RMP w/RMB2(x2)/RMK(x 2),
pushpins(x10)
Universal Mounting Plate (UMP)
10” UMP w/5’ tape, pushpins (x10)
Shelf Mount ing System (Single-1/pk)
Shelf Mount ing System (Divider-2/pk)
Shelf Mount ing System (bulk-18/pk)
33’ Roll Of Mounting Tape
10’ Roll Of Mounting Tape
Mounting Pla te Pushpins (100/bag)
Mounting Pla te Pushpins (10/bag)
8-Port Cat5 e Data Module
8-Port Cat6 Data Module
8-Port Voice RJ31x Module
6-Port Cat6 a Data Module
8-Port Voice Cat 6 w/RJ45 Module
1x8 Port 4 Line w/RJ45 Voice Module
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
F
1.604.881.7835
www.primex.com
125-1655
125-1656
125-1657
125-1658
125-1659
125-166 0
125-0770
125-1623
125-1541
125-1542
125-152 2
125 -0779
125 -1274
125 -082 9
125-153 5
125 -09 86
125-1 035
125 -09 87
125 -09 75
125 -09 77
125 -09 76
Product Description SC
Fiber Transition Cases White ABS
FTC - w/Screw Cap
FTC - w/Single SC/APC Adapter
FTC - w/ext. Adapter Mount
Fiber Transition Outlets
FTO-w/1 SC/APC Adapter
FTO-w/Integrated Splice Tray
SC/APC Fiber Keystone w/Shutter 125-0 908
Keystone Adapter 125-1152
3/4”-1/2” Reducer
1”-3/4” Red uce r
2-Way Coax Splitter (horizontal)
4-Way Coax Splitter (vert/horiz)
6-Way Coax Splitter (vert/horiz)
8-Way Coax Splitter (vert/horiz)
White ABS Hurricane Clip (12/pk) 125 -02 39
F-Connector Keystone 125-0961
125-0945
125 -0873
125 -084 9
125 -088 9
125 -087 9
125-1 022
125 -09 36
125-1661
125-1574
125-157 5
125-157 6
Product Description SC
Cat5e, 110 IDC, 90° HD
Cat5e, 110 IDC, 180° HD
Cat6, 110 IDC, 90° HD
Cat6, 110 IDC, 180° HD
Cat6A, 180°, Unshielded
Cat6A, 180°, Shielded
3-Line RJ12 Voice Jack 125-0959-WT
Blank keystone 125-0960-WT
Cat5e coupler, HD
Cat6 coupler, HD
RG12 coupler, HD
Electrical Installation Kit 125-135 5
PR1500 Freestanding Feet (2) 125-157 1
PR1500 Cylinder Lock Kit (2) 125-157 0
PR1500 Hex Lock Kit (2) 125-1641
125 -09 49-W T
125 -09 48-W T
125 -09 47-WT
125-0946-WT
125-1628 -WT
125-1629 -WT
125 -126 6-WT
125 -126 7-W T
125 -126 8-WT
Fit everything. Together.
452-3120 E & OE 12/18
Loading...